Bob, how many MHz in same conditions on P965 Mainboards ?
Printable View
Bob, how many MHz in same conditions on P965 Mainboards ?
Crucial Ballistix PC2-5300 @ DDR2-1400 5-5-5-15 2.55v Asus P5k-Deluxe
http://valid.x86-secret.com/show_oc?id=199132
Crucial Ballistix PC2-5300 @ DDR2-1402 5-5-5-25 2x1Gb@2.80v Gigabyte Ga-p35-ds3p
http://valid.x86-secret.com/show_oc?id=202608
http://img522.imageshack.us/img522/1...5525bj4.th.jpg
Regards
SPLMANN
Corsair PC8500 @ DDR2 1400 5-7-7-30 1*512mo @2.15v ASUS P5K rév 1.0 bios 0414
aircooling
http://valid.x86-secret.com/show_oc?id=202626
2.15v ?
those chips Are so funny :D
So old 'cause we have them since march 2006...
Wheres that 7580MHz that was banging around?
yes, 2.15v :) at 2.2v, not boot on the p5k, it's funny but it's asus motherboard
for exemple the cpu temp is -8°C when the vcore it's higher to 1.6v :D
759.8Mhz to be exact.
http://www.xtremesystems.org/forums/...8&postcount=43
New WR : 762.8MHz
http://www.jmax-hardware.com/forum/i...4.new.html#new
Wow impressive.
With "just" 2.5V....
Did you try higher volts too?
I can't since BIOS don't propose me higher.
I have DDR MAximise but I don't have Hypro's confirmation that DS3R Combe and Maximiser and compatible :(
Hello jmax
Just remove the coil ;)
:o , which one ?Quote:
Originally Posted by koda
I checked real vdimm on P35C DRSR and with max 0.7v , it isnt 2.5v ... it s up to 2.72-75v :shakes: , i think it s why this mobo oc Ram beter than my others P35 Moterboard.Quote:
Originally Posted by Fr3ak
ok, now that makes a hell of a change if that turms put to be true.
The Crucials you both are using are D9GMHs, right?
I would say "2R0" just at the left of the bottom red ddr slot is dedicated to the DDR voltage regulation.Quote:
Originally Posted by Pt1t
Just use a DMM to valid this one.
Yes, very impressive, good job jmax! :)
@jmax_oc
Cut you please register my Result in your List ?
Crucial Ballistix PC2-5300 @ DDR2-1402 5-5-5-25 2x1Gb@2.80v Gigabyte Ga-p35-ds3p
http://valid.x86-secret.com/show_oc?id=202608
http://img522.imageshack.us/img522/1...5525bj4.th.jpg
thanks !!!
SPLMANN
hey i have a question does any one use or like Ultra Memory from Tigerdirect.com i know i dont like that site eiter but still i own 2 sticks and have them Overclocked Really nice.
Geil PC8500 cas 5 @ 1400 - 2.4v - 5-6-6-20 1*512mb on ASUS P5K Motherboard rev 1.02g bios 0414 - aircooling
http://valid.x86-secret.com/show_oc?id=204525
Hello, I do not have more time this morning (20h non stop benchs) but I just would like o share my results ;)
http://valid.x86-secret.com/show_oc?id=204741
I will post more screens, pictures, videos and hardware setup tomorrow.
Enjoy :thumb:
surely jc you have another few MHz for the almighty 800MHz :eek: :D
good to see you join www.i4memory.com too :up:
Thats insane! :)
Keep pushing for 800Mhz :)
Any updates jmax_oc about vdimm and cooling used, etc?
can you please add which modules were, gmh or gkx.
Crucial Ballistix PC8500 and even others modules (PC5300 (most of them), PC6400,PC8000) have all of D9GMH
You can go see a impressive Data Base on JMax-Hardware : http://www.jmax-hardware.com/bdd/BDD_Puces_DDR2.htm :up:
i'm in.. 2,75v, air cooling
http://valid.x86-secret.com/show_oc?id=205544
jozzy, please send me all the informations needed in the first post ;)
OCZ PC-8500SLi @ 2.83v, 1x1024mb, AirCooling
http://valid.x86-secret.com/show_oc?id=205526
http://img166.imageshack.us/img166/8922/714mhzws9.png
Quote:
Originally Posted by jmax_oc
Name : jozzy
Brand : OCZ
Modele : PC8500 SLI Edition
Size : 1x1024
Real Voltage : 2.75V
Timings : 5-6-6-18
Frequency : 704MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://img485.imageshack.us/my.php?image=704gw4.jpg
http://img485.imageshack.us/img485/5592/704gw4.jpg
Little update
Name : jozzy
Brand : OCZ
Model : SLI Edition PC8500
Size : 1 x 1024mb
Real voltage : 2,55v
Timings : 5-6-6-18
Freq : 725
Board : ASUS P5K Deluxe
Sort of bench : Valid CPU-Z
Cooling : air cooling
Validation link : http://valid.x86-secret.com/show_oc?id=206924
Then it's for when the Update of 700Mhz's Club :D
Hi Jmax :)
Finally i reached the 700mhz club :D
Crucial Ballistix 8500 1x1024 2,55v Air cooling
Heres a 1m spi at 5-5-5-15 at that frequency:
http://img520.imageshack.us/img520/1...001mpf6.th.jpg
And heres the cpu-z validation:
http://valid.x86-secret.com/show_oc.php?id=209916
Edit to follow the presentation rules :)
Name:Cordovader
Brand: Crucial
Model: Ballistix PC2-8500
Size: 1x1024
Real voltage: 2,55v
Timmings: 5-5-5-15
Frequency: 700mhz
Sort of bench: Spi 1m
Cooling: Aircooling
Screen: http://img520.imageshack.us/img520/1...lo7001mpf6.jpg
On a french forum .Syndrome-Oc
There's that Wintec@768
:D :D :D :D :D
Hey guys :)
I need all these informations :
Name : Jmax_oc
Brand : GEIL
Modele : PC8500
Size : 1x512
Real Voltage : 2.45V
Timings : 5-6-6-18
Frequency : 710MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://jmax.oc.free.fr/Geil%20PC8500/memory-2129.JPG
I don't want to give informations because ,it's not mine.I've just seen this 700Mhz .
:shrug:
:eek: I'm still a long way off from HALF that! Congrats to all :clap:
My sig's outdated, using BH5
Name:SteelRat
Brand: GOODRAM
Model: PRO OC - PC2-7200
Size: 2x512
Real voltage: 2,4v
Timmings: 5-8-8-24 (Auto by P35-DS4)
Frequency: 700.8mhz
Cooling: Aircooling
http://valid.x86-secret.com/show_oc.php?id=210581
http://img521.imageshack.us/img521/2...titled5yn6.gif
http://img524.imageshack.us/img524/592/700hk0.jpg
Beautiful polish ram! One of my favourite brands... How many MHz on CL4? On my I had wall at 567 MHz Superpi32M @ 2,67v and uper voltage don't help :( and 625 MHz CL5
There was not time to check, I will do it on Monday. Byt i had tested on 840 3-3-3-10 1T, and 940 4-4-4-12 1T - fully stable.:up:Quote:
Originally Posted by Miravo
Sorry for my bad English.:p:
In this afternoon ,just 2 H ,we had tested my crucial pc 5300 2 X512 and pc8500 2 X 1 on intel because i'm on am2.
:rocker:
Name : redratamd & Florent
Brand :Crucial
Modele : PC5300
Size : 1x512
Real Voltage : 2.55V
Timings : 5-5-5-15
Frequency : 704.3MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : 704.3 Pc5300 Crucial
And it's so easy on this DFI with very good settings.
:banana:
Because ,they're new my crucial pc8500 ,i had say stop for the Vdimm,no more higher.And total aircooling ,no chill or dod on chipset or ram.
Name : redratamd & Florent
Brand :Crucial
Modele : PC8500
Size : 1x1024
Real Voltage : 2.7V
Timings : 5-6-6-18
Frequency : 754.4MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen :
754.4 Pc8500 Crucial
More results in next weeks.:D
Wait Jmax ,he must be better on this w-e.:bounces:
CL4 NEW WR!!!
DDR2-1443MHz(721.7MHz) with 4-4-4-4
http://www.parkoz.com/zboard/view.ph...sc=asc&no=9810
Sorry for you but there is a new WR Cas 4Quote:
Originally Posted by lga775neo
Name:felfin
Brand: Kingston
Model: Hyperx PC2-9600
Size: 1x512
Real voltage: 3v
Timmings: 4-4-4-4
Frequency: 721.5mhz
Sort of bench: Spi 1m
Cooling: Phase Changer
It's My record.
1x512MB Kingston PC2-9600 @ 720MHz 4-4-4-4 with 2.95~3V.
http://www.parkoz.com/zboard/view.ph...sc=asc&no=9810
And, this is CPU-z certification.
http://valid.x86-secret.com/show_oc?id=211298
Memory cooling is Phase Changer for Memory.
Here is Memory Phase Changer info.
http://www.parkoz.com/zboard/view.ph...c=asc&no=23857
This is a new WR cas 4 :http://valid.x86-secret.com/show_oc.php?id=210956
And my record Cas 4 :
http://valid.x86-secret.com/show_oc.php?id=211617
hey guys im in the middle of a build and i've bought me some geil 512 meg sticks in a dual channel pack.
on the shiny geil sticker it says
512mb pc2-6400
ddr2-800 cl=5-5-5-15
gx21gb6400dc
voltage 1.6v
and on the pack ithas the blue dot next to cas 5
what does all this mean im new to this
uh.........you shouldn't post it hereQuote:
Originally Posted by fps4life
Joined to the 700mhz guys :D
Name : Achill3uS
Brand :Crucial
Modele : Ballistix Tracer PC2-8500
Size : 1x1024
Real Voltage : 2.6V
Timings : 5-6-6-18
Frequency : 700.4MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://valid.x86-secret.com/show_oc?id=212011
finally join this club...
Name : wedfighter
Brand : A-DATA
Model : PC9600
Size : 1x512
Real Voltage : 2.5V
Timings : 5-6-6-18
Frequency : 710MHz
Sort of bench : Valid CPU-Z http://valid.x86-secret.com/show_oc?id=213057
Cooling : Aircooling
Screen :
http://img146.imageshack.us/img146/6817/1420eg2.th.jpg
@ TS : update 1st post please.. :up:
update ...
Name : wedfighter
Brand : A-DATA
Model : PC9600
Size : 1x512
Real Voltage : 2.67v
Timings : 5-5-5-26
Frequency : 738 MHz
Sort of bench : Valid CPU-Z http://valid.x86-secret.com/show_oc?id=213619
Cooling : Aircooling
Screen :
http://img78.imageshack.us/img78/2447/738al9.th.jpg
Finally I am in :D
http://www.techworks.pl/xtreme/Screeny%20OC/726.jpg
Name: Miravo aka Xtreme Addict
Brand: Goodram
Model: PC8500
Size: 1x512MB
Real Voltage: 2.905v
Timings: 5-5-5-15
Frequency 726.2 MHz
Sort of bench: photo
Cooling: AC
Polish Goodram PC8500 1x512 MB
Name : c1rcu1tburn3r
Brand : OCZ
Modele : Reaper Hpc-PC8500
Size : 1x1024
Real Voltage : 2.75V
Timings : 5-6-6-20
Frequency : 720.9MHz
Sort of bench : Screen
Cooling : Aircooling (Room +27°)
http://img120.imageshack.us/img120/2...n004fv3.th.jpg
I hope to test it with e6600 soon couse with qx is pretty hard go up with fsb :yepp:
Well done ^^
Lol,put me inda 700's Club :clap:
I have these same sticks.Quote:
Originally Posted by c1rcu1tburn3r
Luckily for you, OCZ has a wonderful RMA process. ;)
:D are your sticks burned?
http://valid.x86-secret.com/show_oc.php?id=214839It took a while but i made it.
Name: Severance
Brand: Ocz
Model: Titanium alpha 1000vx2
Size: 2x1024
Real voltage: 2.6
Timmings: 5-5-5-15
Frequency: 700mhz
Bench: Spi 1m
Cooling: water:up:
The first pair I had *hypothetically speaking* would have died on my 680i Motherboard *hypothetically speaking* if they ran at 2.5v for about 1 month *hypothetically speaking* before one of them decided to die a terrible *hypothetically speaking* death.Quote:
Originally Posted by c1rcu1tburn3r
However.
OCZ's warranty only protects up to 2.35v, so I know better than to ever do the idiotic behavior listed above.
Mine just randomly died. :yepp:
Having said that, the replacement pair only get 2.1v 24/7 because I'm scared chitless that they'll die as well.
at 2.1v, I run 1111Mhz with 5-4-4-12 timings with no problems.
I understand...but it's not my problem.if they'll die i'll take another pair :p:
Btw i tried to go till 3 v :eek: couse i had to test if they rocks,and they're always perfect...some months...
I think on this ram is important to be sure that the heatsink is installed properly,sometimes it's skew and some chips remains detached
Well.....to clarify, I think eVGA's 680i MoBo is the issue, not so much OCZ's product.Quote:
Originally Posted by c1rcu1tburn3r
I am definitely happy with my Reapers, and the 680i is solid as a rock - it just eats RAM. :D
I am impressed , I had enever seen mem clocks anywhere near these :up:
Most of you guys dont mention your rig , is there a particular mobo/chipset you guys are using for extreme clocks ? Or just uber volts ?
;)
Some guys uses ddr booster and LN2 cooling on ram and Nb,but most of us uses only vdimm and a good mainboard aircooled :clap:
Yeah I saw the results in OP , but what mobos are best ? 680i / P35 ? Or depends on other components ?
:up:
I think with no doubt P35...
Sorry for the off topic, but what voltage does Crucial warranty their sticks at? Is it just up to 2.2v? I have the Tracer 8500's right now at 600, but I know they'll hit 700 w/ a lil more volts.
Jmax put me inda Database please i wanna be there :ROTF: :fact: http://www.xtremesystems.org/forums/...&postcount=272
First try with some good sticks {Crucial Ballistix 8000 by promian} & P35 {P5K-Dlx by PCLab.pl} which clock RAM as hell {but the performance is worse than i965 IMO...}.
http://valid.x86-secret.com/show_oc?id=216735 - 731.9 real 5-5-5-15, 2,55V @ BIOS no mods
The same boot {with RAM directly @ 700.5}, 1M for some stability:
http://img395.imageshack.us/img395/4...4012be4.th.jpg
and SetFSB + F7 in CPU-Z, the result is above :).
Maybe I can go higher with some more V {unreal in short period of time, the board is not mine ;)}, looser timings or Single Channel - maybe I will try ;).
Name: JMKS
Brand: Crucial
Model: Ballistix 8000
Size: 2x1024
Real voltage: 2.55 {@BIOS}
Timmings: 5-5-5-15
Frequency: 731.9mhz
Cooling: air
Yes I have to maje a huge update ;)Quote:
Originally Posted by c1rcu1tburn3r
In what way mate ? Can I assume that a P5K-E should have the same potential as your Deluxe ?Quote:
Originally Posted by JMKS
:up:
can I join the club?
Name : PcCI2iminal
Brand : Adata
Model : PC8500
Size : 1x1024
Real Voltage : 2.85V
Timings : 5-6-6-15
Frequency : 743.6MHz
Sort of bench : Valid CPU-Z
Cooling : air
http://img63.imageshack.us/img63/630...mhzcpuzgz5.jpg
http://valid.x86-secret.com/show_oc?id=217490
Name : PcCI2iminal
Brand : Adata
Model : PC8500
Size : 1x1024
Real Voltage : 2.85V
Timings : 5-6-6-15
Frequency : 721.5MHz
Sort of bench : Pi1M
Cooling : air
http://img63.imageshack.us/img63/4027/imagem4xn8.jpg
Name : PcCI2iminal
Brand : Crucial
Model : PC6400
Size : 1x512
Real Voltage : 2.95V
Timings : 5-6-6-18
Frequency : 725.1MHz
Sort of bench : Valid CPU-Z
Cooling : air
http://img218.imageshack.us/img218/4...mhzcpuzob8.jpg
http://valid.x86-secret.com/show_oc?id=217911
My new OCZ PC8500
http://img353.imageshack.us/img353/3...zpc8500kj6.jpg
Name : Florent
Brand : OCZ
Modele : PC8500 Sli Ready
Size : 1x1024
Real Voltage : 2.85V
Timings : 5-6-6-18
Frequency : 750MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://img353.imageshack.us/img353/3...zpc8500kj6.jpg
(Soon more test :) )
dddddaaaaaaaaaaaaaannnnnnnnnnnng 1500ddr on ocz sticks, that's pretty amazing, especially since you pulled it off on a p965 board and not a p35 one.
Looks like ddr2 soon even the 700mhz club will have tons of members like the 600mhz club
Name : loc.o
Brand : Crucial
Modele : Ballistix 8500
Size : 2x1024
Real Voltage : ~ 2.59v
Timings : 5-5-5-15
Cooling : Air (2x92mm) & CPU mach II
Frequency : 703MHz
Sort of bench : spi 1M
Frequency : 720MHz
Sort of bench : cpuz validation
P35C bios F3b
E6600
HD2900XT
Silverstone Zeus 750w
http://img.photobucket.com/albums/v2...-152.60v1M.jpg
http://img.photobucket.com/albums/v292/Viss1/720val.jpg
http://img.photobucket.com/albums/v292/Viss1/720P35.jpg
My Kingston 2x1g on GMH (B6-25) are on the way! :)
can i reach 700+ on 680i mobo?
I don't think, 680i is bad on OC Ram
For good RAM OC go to P35
what about X38?
Not available now but I think that it will be still better than P35 :)
Always with my OCZ PC8500 SLI Ready
http://img128.imageshack.us/img128/8...czcopiecl7.jpg
Name : Florent
Brand : OCZ
Modele : PC8500 Sli Ready
Size : 2x1024
Real Voltage : 2.55V
Timings : 5-6-6-18
Frequency : 709,7MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://img128.imageshack.us/img128/8...czcopiecl7.jpg
Name : eldera
Brand : Crucial
Modele : 10th Anniv (PC5300)
Size : 2x1024
Real Voltage : 2.27V
Timings : 5-5-5-15
Frequency : 700MHz
Sort of bench : Valid CPU-Z (http://valid.x86-secret.com/show_oc?id=217529)
Cooling : Aircooling
Screen : http://www.speedtime.cn/bbs/attachme...RyjLPpG4dA.jpg
no one update the 1st post? :D :D
Name : El Snorro
Brand : Crucial
Modele : Ballistix 8500
Size : 2x1024
Real Voltage : 2,58v DMM
Timings : 5-6-6-15
Cooling : Air
Frequency : 708.8MHz
Sort of bench : spi 1M
P35C bios F3b
E6600 L628B123
X1900XTX
Tagan 580w
http://valid.x86-secret.com/show_oc.php?id=221847
http://i166.photobucket.com/albums/u...rro/708566.jpg
Does the pi performance lessen after 600 mhz or so? Because I get 12.187 at around 560 mhz on the ram.
A little bit better than last time...
Qx6700
Ocz Hpc-Reaper pc-8500 2.7v
Asus P5K Premium
Cooling : Air (Room temp 27°)
http://www.xtremehardware.it/forum/p...e.php?n=62&w=o
A lot amazing results here.
I hope my Crucial RAM can get into that list when my P35 board arrives :)
Name : caesarean
Brand : Crucial
Model : Ballistix PC2-8500 CL5
Size : 2x1024
Real Voltage : ~2.59V, Default+0.7 bios set
Timings : 5-5-5-15
Frequency : 700.2MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://valid.x86-secret.com/show_oc?id=228159
Nevermind
Joining also
OCZ Platinum 8000 1GB kit on Gigabyte P35-DQ6 @ 2.65V
Aircooled
http://valid.x86-secret.com/show_oc?id=213741
Name : caesarean
Brand : Crucial
Model : Ballistix PC2-8500 CL5
Size : 2x1024
Real Voltage : 2.74V
Timings : 5-6-6-18
Frequency : 706MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen : http://valid.x86-secret.com/show_oc?id=228918
Name : caesarean
Brand : BUFFALO
Model : Firestix FSX1066D2C-K1G, PC2-8500 CL5
Size : 2x512MB
Real Voltage : 2.75V
Timings : 5-9-9-31
Frequency : 700.5MHz
Sort of bench : SuperPI 1M, Single
Cooling : Aircooling
Screen : http://valid.x86-secret.com/show_oc?id=229270
Lool,never seen before 5-9-9-31 timings...what's the way u set this?Quote:
Originally Posted by caesarean
on P35C-DS3R Rev 1.1, with bios F2Quote:
Originally Posted by c1rcu1tburn3r
I set 5-6-6-18, but cpu-z1.40 read 5-9-9-31 :confused:
I don't know why...:shrug:
or it's time to up bios, to F3b ??? or F4x ???
1400 ddr ? only 2,27 ? is is PI32M stable ? woot if yesQuote:
Originally Posted by eldera
:eek: :shocked:Quote:
Originally Posted by Hutch
Name : caesarean
Brand : Crucial
Model : Ballistix 8500
Size : 1x1024
Real Voltage : 2.74V
Timings : 5-6-6-18
Cooling : AIR, SANYO San Ace 120mm x 2 (Room Temp 26C, DMM)
Frequency : 712.5MHz
Sort of Bench : SuperPI 1M
P35C (Rev. 1.1) bios F3b
E6320 L648G420
Quadro NVS 280 PCI
ZIPPY Emacs 600W G1
CPU : IFX-14, San Ace 120mm x 1
NB : HR-05-SLI, San Ace 120mm x 0.5
SB : HR-05, San Ace 120mm x 0.5
http://valid.x86-secret.com/show_oc?id=232367
Name : marcolecorse
Brand : crucial
Modele : PC8500
Size : 1x1024
Real Voltage : 2.70V
Timings : 5-5-5-18
Frequency : 758,3MHz
Sort of bench : Valid CPU-Z
Cooling : Aircooling
Screen :
http://marc.bellini.free.fr/Ram/Crucial/cas5758mhz.png
Héhé, good job marco :up:
Name : caesarean
Brand : Crucial
Model : Ballistix 8500
Size : 2x1024
Real Voltage : 2.62V
Timings : 5-5-5-15
Cooling : Air, Room Temp 26C (DMM)
Frequency : 720MHz
Sort of bench : Valid CPU-Z
Screen : http://valid.x86-secret.com/show_oc?id=234193