Ivy Bridge i5 3570K/i7 3770K batch and o/c results

3770k @4.5ghz
gigabyte z77 ud5h mobo
vengence 1600mhz cas9 memory 2x4gb(stock)
gigabyte windforse x3 670oc(stock oc)
corsair ax850 watt psu
corsair 120gb gt ssd

i have been mesing about with volts
but it seems even with pll at 1.75 (@1.6v bios now) v1.33 vcore stable with extreme llc
i cant drop my v-core any lower than v1.31 in bios its just crashing or bsods on me max temp is 83c with h100i with sp120mm perfomance fans (on low 1100rpm)
my vtt acording to hwinfo64 is v1.056
i just think i have a bad cpu to be honest
will this be fine for 24/7 use tho
thanks

my first I7 3770K died after a year on the day.
it was the memory controller, got a new RMA, but the new had an error, also in memory controller, so I got a new one again.

the new run the wPrime 1024 at 1.288vcore 4.6GHZ
Pll 1.733v load temp max 56c watercooling
asus maximus v extreme P67

all cstat disablel

Batch L230B6

uses a new BIOS 3604 on my Maximus IV Extreme P67 so I need to find the voltset again, only test bios for 2 days now

opdat
vcore jump ,ned 1.36v to 4.7GHZ wprime 1024

decided to delid my 5Ghz HT stable chip with good IMC i was blending over 96C to 104C lol

now look :)

http://i.imgur.com/OWcWUmh.jpg

http://i.imgur.com/93fFtpO.jpg

liquid pro does the job amazing !!!

Quote:

---

Originally Posted by andressergio

decided to delid my 5Ghz HT stable chip with good IMC i was blending over 96C to 104C lol

now look :)

http://i.imgur.com/OWcWUmh.jpg

http://i.imgur.com/93fFtpO.jpg

liquid pro does the job amazing !!!

---

Nice temps man :) can you do a heaven loop I wanna see total temps with all those gpus in your loop

i have ddr3 2133 ram i assume i can use it with a 3770k? this ram http://www.newegg.com/Product/Produc...82E16820231519

Quote:

---

Originally Posted by the_real_7

Nice temps man :) can you do a heaven loop I wanna see total temps with all those gpus in your loop

---

Not the best drivers for heaven...
here its all

GPU temps up to the left corner

http://i.imgur.com/F0vHGCt.jpg

http://i.imgur.com/oGtmzaT.jpg


CPU temps u can see the max temps there

http://i.imgur.com/J6MIjfj.jpg

cheers !!!
Sergio

Sergio those temp are amazing for the clocks and load . . People dont even get those with sli and 4.5 clocks man veryyy nice monster yoh have there

Quote:

---

Originally Posted by the_real_7

Sergio those temp are amazing for the clocks and load . . People dont even get those with sli and 4.5 clocks man veryyy nice monster yoh have there

---

thank you man !!!

Good work Sergio!

Quote:

---

Originally Posted by nacho_arroyo

Good work Sergio!

---

Thanks nacho !!!

Quote:

---

Originally Posted by leo5111

i have ddr3 2133 ram i assume i can use it with a 3770k? this ram http://www.newegg.com/Product/Produc...82E16820231519

---

why not ? i dont know in my situation the snipers wouldnt OC much but you should try them at 2200

cheers !
Sergio

Quote:

---

Originally Posted by andressergio

decided to delid my 5Ghz HT stable chip with good IMC i was blending over 96C to 104C lol

now look :)

http://i.imgur.com/93fFtpO.jpg

liquid pro does the job amazing !!!

---

Sergio...

Nice work with the O.C. And temps!

Quote:

---

Originally Posted by PolRoger

Sergio...

Nice work with the O.C. And temps!

---

Thankd bud !!!

Quote:

---

Originally Posted by andressergio

decided to delid my 5Ghz HT stable chip with good IMC i was blending over 96C to 104C lol

now look :)

http://i.imgur.com/OWcWUmh.jpg

http://i.imgur.com/93fFtpO.jpg

liquid pro does the job amazing !!!

---

Jesus, that is amazing. Congrats Sergio :)


Looks like you got more temperature room for extra 100-200 Mhz.

Quote:

---

Originally Posted by LiquidReactor

Jesus, that is amazing. Congrats Sergio :)


Looks like you got more temperature room for extra 100-200 Mhz.

---

Thanks bud !!!

With haswell out, any of you guys want to get rid of your 5.0ghz stable 24/7 Ivys?

Quote:

---

Originally Posted by Phaseshift

With haswell out, any of you guys want to get rid of your 5.0ghz stable 24/7 Ivys?

---

no man till i see a batch stable 5Ghz HT on water :) but for me i have all with this rig nonsense to move for just a lit more performance, even having beastly 2800CL11-13mem that could run 3000 stable on haswell

Hello...

Just got some new stuff in for a build (been on Mac for several years now). The i5 3570k I have is 3242B829, does anyone have any comments about this chip?

My hope is to do 4.5 ghz stable with minimal voltage changes, using an asrock Z77 extreme4 and a corsair H80. Any input would be appreciated.

My 3570k 4,2Ghz 1,1V batch: Costa Rica 3237B968

http://img809.imageshack.us/img809/8706/krg7.jpg

I have so so chip that boots into windows with 1.285 in bios and 1.264 in windows.
It can run super pi - but to be completely stable it need 1.375 vcore in bios and 1.350 in win7.

Attachment 131870

OK here we are December 2013, going to put in i3570k on a asroc 77oc in a box with watercooling. My question is should I just go straight to delidding and watercool or should I leave the lid on and go to fan or water cool first to see if the chip is reasonable??

I think you should check it 1st, see if it works before you go de-lidding it.

Thanks NEOAether, I came to the same conclusion and ordered a decent fan

I was wondering, all the threads just seem to talk about multiplier, its been a few years but I would push Bclock first and then max out multiplier -is that not done anymore? The "world record" vid (LN2) shows the guy going to Bclk 110 right off the bat, don't see anything like that posted here- is Bclk hard to push on these chips or just not worth the trouble?

I would test both max speed and chip IMC for high ram speeds, high bclk is always nice with the right ram though can be tough to find with reg cooling but they are out there. I had a solid 3770K that could do about 108 and clock to about 5400 on remote water cooling. Unfortunately I binned a lot of chips before that one came up and sold it back in may.

Well this is a pleasant surprise! Never had an easier OC: - 3570k on an asrock77oc mobo with an inexpensive corsair cooler - only added a second fan. stable at 4.6 GHz with a nice low voltage of 1.24. It really is as easy as setting the multiplier and cpu voltage in bios, wow. I stop at max core of 70C, did get to 4.7G at 1.4v but not worth the sudden increase in heat! Hopefully the validation pic will insert here, anyway it was a costa rica chip so they must have gotten their thermal paste spreading figured out.

Got everything I need for water again, wonder if I can gain much?? Any thoughts??

http://valid.canardpc.com/d9i84d