I have the same batch as you and mine runs really hot, I cant do anything with it on air...think I'm gonna sell it.Quote:
Originally Posted by jcniest5
Printable View
I have the same batch as you and mine runs really hot, I cant do anything with it on air...think I'm gonna sell it.Quote:
Originally Posted by jcniest5
Even at stock? And you make sure heatsink is installed correctly? My temp at stock speed with underload all cores hover around 54-56. With 21x205 (4.305Ghz), all cores run around 79ish. This is on Scythe Mugen 2. I also have Extreme 120, which should run around the same temp.Quote:
Originally Posted by lee63
found some more Bclks, this classified is awesome! not to mention batch# 3845B027
ifx-14 3fans, 1.381 Vcore, 239.4x21
http://valid.canardpc.com/show_oc.php?id=569733
Even at stock, Ive double checked my HS.. Im using the True Black and the Classified boardQuote:
Originally Posted by jcniest5
I'm wondering if it might be the board...have boards been known to over volt ?
I see you are finding some good settings, way to go... :up:Quote:
Originally Posted by roller11
I applied your suggestions and some of my own and the result was 5 more bclks. Can't thank you enough. :)
What kind of temp are you really getting? And at what speed?Quote:
Originally Posted by lee63
Okay, I guess I missed it if you guys actually exchanged info on this thread. What exactly is it that enable your to go that high in bclk? Maybe it will help me, too.Quote:
Originally Posted by roller11
Idle 47+ if I add anymore v its 58+, it defaults at 1.17 if take it up to 1.20 its 60+ I have double checked everything.Quote:
Originally Posted by jcniest5
What cooler are you using on it right now?Quote:
Originally Posted by lee63
More PCIE frequency, it has been posted around XS in a few different places... :DQuote:
Originally Posted by jcniest5
have you tried undervolting the chip? seems defective, like runaway current leakage. maybe it'll be manageable at 1v or something, but in any case, you should return it.Quote:
Originally Posted by lee63
He is using the True Black...a few posts back that's what he said...Quote:
Originally Posted by jpm804
Yep its the True Black.Quote:
Originally Posted by jcniest5
Yeap, that's really high. Same reading in both the OS and BIOS, I take it? Do you have another CPU to try? Maybe your board is faking it?Quote:
Originally Posted by lee63
Quote:
Originally Posted by lee63
Have you tried the stock cooler just to see what tempts you get ... maybe the true is not making good contact.
Yeah, that's another possible point...Or maybe the CPU is concave or corvex and makes a very bad contact with the Heatsink.Quote:
Originally Posted by jpm804
Well my last 920 was fine wit this HS...kind wish I kept it.Quote:
Originally Posted by jcniest5
I put a razor on top of my D0 and I looks fine. HS is making full contact and I even did the True washer trick.
Can a bad board make CPU run hotter?
It may, but very rare if ever. Only thing I could think of is that Intel may have made a bad IHS contact with the core inside, so heat transfer is very bad.Quote:
Originally Posted by lee63
http://valid.canardpc.com/show_oc.php?id=569921
Here is a quick test of chip #1 on my bloodrage
Batch# 3849B028
Vcore 1.36
VTT 1.344
DIMM 1.616
I will test this chip on the classified as soon as I can....
Nice ,, what kinda temps are getting with it?Quote:
Originally Posted by Bei Fei
Have the same batch, and its a roaster. At 4.2ghz 1.275 vcore just a quick linx run with default memory usage runs it to 75c on my true, so I can imagine what it will hit with max mem.Quote:
Originally Posted by jpm804
Some Results from my 920 D0
http://www.abload.de/thumb/4510htonprimestablead53.jpg
1.5h Prime stable with HT on.
Your result in on WaterCooling ? :up:Quote:
Originally Posted by crashmax
Sorry for not posting the store, it’s the central Ohio location (Columbus, Ohio).Quote:
Originally Posted by jcniest5