Than you mate, I have the Maximus II now playing with itQuote:
Originally Posted by WaterFlex
Cheers
Sergio
Printable View
Than you mate, I have the Maximus II now playing with itQuote:
Originally Posted by WaterFlex
Cheers
Sergio
Guys I have a Rampage Formula with the Q9650. I have reached 4.1 GHz and wanted to know how to view the NB / SB temperature and voltages. I am running around 71 C load with Xigmatek S1283 CPU cooler according to Real Temp. Is it ok or should be reduced?
Here's mine....also on Maximus Formula II.....
http://i16.photobucket.com/albums/b3.../Q96504ghz.jpg
Amazing bito !!Quote:
Originally Posted by bito
Can you post your VTT / PLL / NB and GTLS references plz...
Cheers
Sergio
Mine q9550 :D:
http://img154.imageshack.us/img154/9...shot019vk6.jpg
Excellent work there angelreaper !
Sure...the settings in bios as follows:Quote:
Originally Posted by andressergio
CPU PLL: 1.5v
VFSB: 1.153v
VNB: 1.153v
CPU GTL's : +10/-40/+10/-40
NB GTL: +20mV
Will try to lower further if possible, although i am very happy with this.
http://i16.photobucket.com/albums/b3...Q965040Ghz.jpg
Reaching 4.0 Ghz with 1.232 volts is just crazy.. thats so NOT fair.. whats your VID on that chip. Mine's 1.2500 so I needed that just to run at stock speed. lol. sadness. although I'm running 4.0 Ghz with 1.304v I'm doing ok, but I sure wish I could do what you are. as I'd be at 4.4 Ghz instead. lol.
Nice work there guys!
Thanks xguntherc.....the vid is 1.225v. I'm sure that yours would run stock speed at way less than 1.25v.
Mine will run the stock 3.0Ghz at only 1.00v prime95 loaded !!
Nice clock Bito. Wish i had kept mine now.
@bito that is some amazing volts all around for that overclock!great job
Thanks guys..... What is impressive is that my Corsair 4gb 8500 Dominators are running at only 1.8V.
Vnb is now at 1.16625v. Very pleased with this setup.
Thank you Bito will tryQuote:
Originally Posted by bito
Cheers mate
Sergio
Thanks @ Bito for sharing his set up it helps me a lot :
http://i18.photobucket.com/albums/b1...62/Q9650-1.jpg
My Settings : The board is a M2F
CPU pll : 1.50
VFSB : 1.17950
VNB : 1.16625
GTL 0 = +10
GTL 1 = -40
GTL 2 = +10
GTL 3 = -40
NB GTL : -10
No problem....excellent result Alastor2262 :)
Not bad boards once you get the hang of them.... :D
nice results bito & alastor !
I'm trying lowering vcore as mine is vid 1,25
LOAD
http://img367.imageshack.us/img367/1...975sfftkx2.jpg
IDLE
http://img411.imageshack.us/img411/8...975sfftlp9.jpg[/QUOTE]
heads up: my 3rd q9650 on the way.. one of you better get your q9650 @ 4.9ghz on air before ill get my 3rd q9650 @ 4.9 on air
:D
How cold is that air about -50c?Quote:
Originally Posted by NapalmV5
dont have that cooling luxuryQuote:
Originally Posted by road-runner
http://www.accuweather.com/us/wa/sea...her&traveler=0
dont even have the means to bench outside
inside apartment ambient of no lower than 70 F
keep at it road-runner keep at it
just cause you cant oc @ 4.9 on air doesnt mean no one else cant
blame your incompetence elsewhere
wtf is wrong with people lately
Wow I was joking with you but if you want to be that way, F/O...Quote:
Originally Posted by NapalmV5
you were honestly joking ?Quote:
Originally Posted by road-runner
cause thats the 2nd time youve asked me how cold the air is..
left the thread.. decided to post again for one last go @ q9650
all i meant is to push you guys to push your q9650s harder one last time.. and not a moment too soon i get a response like that..
fine no problem i wont bother this thread again
out!
Anyone runing 450x9 on a Q9650 vid 1,25 ?? on a Maximus II ??
Can you post your settings plz ?
I posted my results on 445x9 i'm trying to lower vcore but seems that he needs it...i want to know what settings vtt, pll, GTLS are using for 450x9
Cheers :up:
Sergio
Alastor: Very good results especially with the.. 1.2 vcore
1.3875 vcoreQuote:
Originally Posted by andressergio
1.55 pll
1.351vtt
1.351nb
2.13ram
gtls are on auto, rock solid 24/7
asus rampage extreme x48 is this a good board for q9650