** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Quote:

---

Originally Posted by radaja

but use the values l0ud_sil3nc3 said to use(.785/.800)

http://i46.tinypic.com/2444b3c.jpg

---

Working well 4 me :up:

q9550 @ 4 GH, 1.184v


http://img163.imageshack.us/img163/2387/8mb.jpg



http://img716.imageshack.us/img716/4200/15xibt.jpg

Good news.. Good news...

Installed Q9650 into USB3P, ported over my x48 Blackops 24/7 (Q9650/445 FSB) settings to USB3P bios, and everything worked the first time. :up: This was far easier than I thought it would be.

Once I get a real cooling solution, I will explore Q9650-USB3P-action more fully.

XmX

Quote:

---

Originally Posted by Gaul

Working well 4 me :up:

q9550 @ 4 GH, 1.184v


http://img163.imageshack.us/img163/2387/8mb.jpg



http://img716.imageshack.us/img716/4200/15xibt.jpg

---

Quote:

---

Originally Posted by XmikeX

Good news.. Good news...

Installed Q9650 into USB3P, ported over my x48 Blackops 24/7 (Q9650/445 FSB) settings to USB3P bios, and everything worked the first time. :up: This was far easier than I thought it would be.

Once I get a real cooling solution, I will explore Q9650-USB3P-action more fully.

XmX

---

congrats to both :up:

Quote:

---

Originally Posted by radaja

maybe your p45 dont have it.i know my ST needed tRC set manually or it would set 20 or 21 instead of the SPD of 37

Channel A & B

Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[10]
tRCD....................................[10]
tRP.....................................[10]
tRAS...................................[24]

>>>>> Advanced Timing Control

tRC....................................[37] this is it on my bios
tRRD...................................[4]
tWTR...................................[5]
tWR....................................[10]
tWTP...................................[22]
tWL....................................[8]
tRFC...................................[74]
tRTP...................................[5]
tFAW...................................[20]
Command Rate (CMD)......................[ 1T ]
Static tRD......................................[12]

---

thanks Robert dont have tRC on my bios that could be the issue i tested and it can go over 1792 changing fsb speed so something is crapped out i will be testing X58 + I7 soon :D

Quote:

---

Originally Posted by andressergio

thanks Robert dont have tRC on my bios that could be the issue i tested and it can go over 1792 changing fsb speed so something is crapped out i will be testing X58 + I7 soon :D

---

congrats.dont do what i did and give up too quickly because it was too easy to OC and got boring.keep playing with it and you will love the x58+i7 and appreciate the full power it brings:up:

Quote:

---

Originally Posted by radaja

congrats.dont do what i did and give up too quickly because it was too easy to OC and got boring.keep playing with it and you will love the x58+i7 and appreciate the full power it brings:up:

---

thanks my friend :up:

Quote:

---

Originally Posted by andressergio

congrats to both :up:

---

thanx, push little more....

q9550 @ 4.2 gh, v1.25


http://img594.imageshack.us/img594/584/8mb42gh.jpg




IBT 10xLoops

http://img713.imageshack.us/img713/7931/42ghv125.jpg

must be the wrong pictures, they say 2.970Ghz, 495*6 cpu-z, and real temp says 3.712,495*7.5 ?

Bug?

BTW use more than 1024megs of memory, try to do that same ten pass with max memory.

ok, well enough reading on this thread and might as well make a post..

i wanted to say thanks to Sergio for the help with memory idea's for the new USB3P i am getting.. Thanks

i have a UD3P with a Q9550 i got from NoGuru... been a great board thus far and no issues....

but i wanted to " try " something else out before jumping into a P55 or X58 and thought i might as well try a USB3P..

I'm going to be running the USB3P with the G.Skill Eco's for the time being...
Eco's

but hope to try out the
Super Talent Chrome Series DDR3-2000 2GB CL8 Memory WB200UB2G8

or

Super Talent DDR3-2200 4GB CL8 Dual Channel Memory - WS220UX4G8

i will be running Chilled Air water cooling until i take a drive to go see Kingpin and get a new F1 Gemini..

here was a test with my Q9550
http://valid.canardpc.com/show_oc.php?id=1342380

and one with my Rampage and E8500
http://valid.canardpc.com/show_oc.php?id=1336614

i hope to have a little fun with this new USB3P, should be fun on water and Dice with some duals, quads and maybe some P4's...

thanks for all the great info here..... :up:

CHiLLiN1369,so your XtremeCuztoms huh?good to see you here:up

Quote:

---

Originally Posted by Commander_HK47

must be the wrong pictures, they say 2.970Ghz, 495*6 cpu-z, and real temp says 3.712,495*7.5 ?

Bug?

BTW use more than 1024megs of memory, try to do that same ten pass with max memory.

---

no, its coz C1E Enable, its mean when full load x8.5, when idle drop to x6 :)

4.3 GH v1.28 for CPU Vantage, C1E disable

http://img822.imageshack.us/img822/9913/disp.jpg

Quote:

---

Originally Posted by radaja

CHiLLiN1369,so your XtremeCuztoms huh?good to see you here:up

---

jeeeze word customs makes me sick look at what our customs charge us for a value of 249 ....tax is 100%

http://img576.imageshack.us/img576/7273/cost.jpg

Quote:

---

Originally Posted by Gaul

thanx, push little more....

q9550 @ 4.2 gh, v1.25


http://img594.imageshack.us/img594/584/8mb42gh.jpg




IBT 10xLoops

http://img713.imageshack.us/img713/7931/42ghv125.jpg

---

keep it up Gaul nice results :up:

Quote:

---

Originally Posted by CHiLLiN1369

ok, well enough reading on this thread and might as well make a post..

i wanted to say thanks to Sergio for the help with memory idea's for the new USB3P i am getting.. Thanks

i have a UD3P with a Q9550 i got from NoGuru... been a great board thus far and no issues....

but i wanted to " try " something else out before jumping into a P55 or X58 and thought i might as well try a USB3P..

I'm going to be running the USB3P with the G.Skill Eco's for the time being...
Eco's

but hope to try out the
Super Talent Chrome Series DDR3-2000 2GB CL8 Memory WB200UB2G8

or

Super Talent DDR3-2200 4GB CL8 Dual Channel Memory - WS220UX4G8

i will be running Chilled Air water cooling until i take a drive to go see Kingpin and get a new F1 Gemini..

here was a test with my Q9550
http://valid.canardpc.com/show_oc.php?id=1342380

and one with my Rampage and E8500
http://valid.canardpc.com/show_oc.php?id=1336614

i hope to have a little fun with this new USB3P, should be fun on water and Dice with some duals, quads and maybe some P4's...

thanks for all the great info here..... :up:

---

glad to help mate :up: you will enjoy a lot as i did now i will try something else im anxious lol

cheers from South America
Sergio

Quote:

---

Originally Posted by radaja

CHiLLiN1369,so your XtremeCuztoms huh?good to see you here:up

---

Thanks..

I had to pick another name when i joined here... probably because of my name with the Xtreme.... it would not allow me to use it.

Well, I've been reading parts of this thread for over an hour and have barely scratched the surface. Based on everything I have read, I'm ready to purchase one.

I have two important questions:

I am trying to purchase the GA-EP45-UD3p, as I need a full featured mobo, but cannot seem to find it anywhere. Has it been replaced with another, newer model?

What is the general agreement on the best memory to use with this board? I'm not looking for record overclocks, just very good performance for a general use, digital photography and gaming pc.

Thanks for your help. If I missed something already mentioned, well, the thread is almost 200 pages long! :eek:

Quote:

---

Originally Posted by JohnClark

Well, I've been reading parts of this thread for over an hour and have barely scratched the surface. Based on everything I have read, I'm ready to purchase one.

I have two important questions:

I am trying to purchase the GA-EP45-UD3p, as I need a full featured mobo, but cannot seem to find it anywhere. Has it been replaced with another, newer model?

What is the general agreement on the best memory to use with this board? I'm not looking for record overclocks, just very good performance for a general use, digital photography and gaming pc.

Thanks for your help. If I missed something already mentioned, well, the thread is almost 200 pages long! :eek:

---

Well John...

they dont make the UD3P anymore so that is why you are having a difficult time finding one. they do show up from time to time but when they do they seem to sell very fast. there are other versions that can be found elsewhere.... like the EP45-UD3L/R and then you get into the newer versions which would be DDR3.. like the EP45T-USB3P (i just bought one today)

so do some searching and you may get lucky and find one... these are perfect all around boards for overclocking, gaming or anything you want to throw at them... even Dry Ice and LN2 cooling..

Good Luck

Quote:

---

Originally Posted by CHiLLiN1369

Well John...

they dont make the UD3P anymore so that is why you are having a difficult time finding one. they do show up from time to time but when they do they seem to sell very fast. there are other versions that can be found elsewhere.... like the EP45-UD3L/R and then you get into the newer versions which would be DDR3.. like the EP45T-USB3P (i just bought one today)

so do some searching and you may get lucky and find one... these are perfect all around boards for overclocking, gaming or anything you want to throw at them... even Dry Ice and LN2 cooling..

Good Luck

---

Thanks for the help, Chillin. I was just looking at the EP45T-USB3P you mentioned purchasing. Should I expect the same overclocking, gaming and everything else ability from that model? It's available at a great price, and I just can't see dropping $200-300.00 on a motherboard.


John

the usb3p price wise is almost exactly what a ud3p was when they were available. and DDR3 prices are sometimes better then DDR2 prices.
if your staying with socket 775 i can't see going wrong with the USB3P at all.
check newegg, they have them in stock... if you were closer to S.E. Mi i would suggest going to Microcenter in Madison Heights so you can see the board in person..

Is it fair to recommend the USB3P when its bios appears to be at an early production stage, and support from giga appears to be currently non-existent?

As most of us realize, Gigabyte (from what I recall) doesn't even mention the F2d beta bios (which does have some relevant bug fixes!) anywhere on their official sites. This is somewhat inexcusable, guys, and we know it.

XmX

Quote:

---

Originally Posted by XmikeX

Is it fair to recommend the USB3P when its bios appears to be at an early production stage, and support from giga appears to be currently non-existent?

As most of us realize, Gigabyte (from what I recall) doesn't even mention the F2d beta bios (which does have some relevant bug fixes!) anywhere on their official sites. This is somewhat inexcusable, guys, and we know it.

XmX

---

you are absolutely correct... but i like to keep a hope alive that gigabyte is going to step up and provide more updates to their current boards that are on the marcket that are 775 based.

i can tell ya one thing though....... This USB3P hates P4's....
I had better results on my Rampage Formula then with this things...
I hate that it won't go over 1.4v ...... grrr oh well

Quote:

---

Originally Posted by andressergio

keep it up Gaul nice results :up:

---

Thanx

q9550 @ 4.3 GH v1.26 for Hyper Pi


http://img832.imageshack.us/img832/3976/8mb43gh.jpg




3 hours prime95 small fft with 1.296v

http://img507.imageshack.us/img507/5668/43gh13v3jam.jpg

Nice going Gaul :up: What cooling you running?

I'm hoping to get a Q9550 from MicroCenter, but not one nearby. I wish they would ship those damn things!! I've been encoding some HDTV recordings and DVD with HandBrake and those extra 2 cores would help!!!

Quote:

---

Originally Posted by bluestang

Nice going Gaul :up: What cooling you running

---

Megahalem with it's thermal paste then the FAN is Silverstone FM 121 (Full Speed 110 CFM) :)

Quote:

---

Originally Posted by bluestang

Nice going Gaul :up: What cooling you running?

I'm hoping to get a Q9550 from MicroCenter, but not one nearby. I wish they would ship those damn things!! I've been encoding some HDTV recordings and DVD with HandBrake and those extra 2 cores would help!!!

---

Tigerdirect sells OEM Q9550's for 225.00... :up:
i know the microcenter by me has been all out of them for a few months now...