anyone happen to know somewhere I can purchase a UD3P? it seems like everywhere is sold out that I can find, even fleabay only showed 1 when I looked.
anyone happen to know somewhere I can purchase a UD3P? it seems like everywhere is sold out that I can find, even fleabay only showed 1 when I looked.
Well i sold my seagate raid and decided to try the beloved F3's Spinpoints that all ppl are sayin very nice things about them...and they were right im impressed...
average is 100Mbytes more than my 3 seagates
http://img180.imageshack.us/img180/9071/p1050680.jpg
http://img440.imageshack.us/img440/5635/p1050832.jpg
http://img713.imageshack.us/img713/7...to20102256.png
cheers :toast:
Sergio
Very nice. Send them to me for some 'testing' hehe :D
Sweet rig sergio :up:
LOL nooooo !!! thanks mate !Quote:
Originally Posted by CryptiK
Thanks kill_a_watt :up:Quote:
Originally Posted by kill_a_wat
I thought I saw radaja selling one in the FS section when I was in there the other day. Might want to look there.Quote:
Originally Posted by 64dragon
Yeah, I think it is coming back from RMA.Quote:
Originally Posted by bluestang
Nice Serg, I will hit you up on MSN Sunday night.
Did a little run last night http://valid.canardpc.com/show_oc.php?id=1343901
hey mate how are you !Quote:
Originally Posted by NoGuru
thats an awesome run congrats !
Been having a few problem of late with my UD3P board (v1.1) running Win7 x64 with periodic but random freezes that would last about 1-2 mins before bursting back in to life. Really annoying and tried lots of things, but it seemed to happen at times when the hard drives were especially busy. Anyway, I installed the latest JMicron SATA drivers (later versions than the ones on the Gigabyte site) and the problem has gone away.
Noted following fix in the release notes "Windows will freeze when device remains busy abnormally (by LeCroy Infusion and a hammer)."
ftp://driver.jmicron.com.tw/jmb36x/XP_Vista_Win7/
Just sharing in case anyone else has the same problem.
hey flint did you notice any performance gains , a lot of us here like to use that controller for performance data drives especially like mr andressergio running three spinpoints in a raid setup :DQuote:
Been having a few problem of late with my UD3P board (v1.1) running Win7 x64 with periodic but random freezes that would last about 1-2 mins before bursting back in to life. Really annoying and tried lots of things, but it seemed to happen at times when the hard drives were especially busy. Anyway, I installed the latest JMicron SATA drivers (later versions than the ones on the Gigabyte site) and the problem has gone away.
Noted following fix in the release notes "Windows will freeze when device remains busy abnormally (by LeCroy Infusion and a hammer)."
Just seeking some help to understand my UD3P and Q9650. Here is some of my overclocking result so far:
Ambient 28C
http://img651.imageshack.us/img651/5284/28cb.jpg
My current setting:
Cpu vCore: 1.30625v
CPU termination: 1.2v
CPU reference: .760v
MCH: 1.28v
and the rest are values correspond to the stock voltage.
Question 1: In the BIOS it is 1.30625vCore, but under linx usually load at 1.200v/1.216v mostly why such huge Vdroop (LLC disabled). I am kind of scared to use LLC since Anandtech kill their QX9650 by enabling LLC.
Question 2: Weird scenario is that whether I change the CPU termination voltage I can't boot without restarting a few times then in the MIT screen said "unstable due to overclocking" something along those lines.
Thanks for helping me understanding this motherboard.
No, sorry. Not that I noticed.Quote:
Originally Posted by the_real_7
LLC is fine your not going to kill anything and as for termination voltage make sure you first set that at 1.2 before you change your cpu and mch reference skews.Quote:
Originally Posted by prtuc2
A good one to try is .785/.800 it seems to have worked with almost all of my other chips.
So, you are saying every time I go into the BIOS I must set the CPU termination to 1.2 then tune other setting? If I change the termination to 1.3V to get stability at higher frequency how would I do so? Sorry for asking repetitive questions and thanks for the help so far.
go in to the bios set vtt to 1.2 then set your cpu ref to .785 and your mch ref to .800 then go back to vtt and set that to 1.3 and the correct values will be inserted:up:Quote:
Originally Posted by prtuc2
heres a little guide i made,might help you understand how it works.Quote:
Originally Posted by prtuc2
but use the values l0ud_sil3nc3 said to use(.785/.800)
http://i46.tinypic.com/2444b3c.jpg
same happens to me i run all day a night 9 x 450 4050 , i can even run 200b with a divider and do 4250 ...but my board no matter what voltages will not do 1.1 8 x 500 tried 3 different rams ? what version you have let me guess a 1.1Quote:
I'm having a brain fart here from lack of sleep, but this is what I'm running into.....I have my EP45C-UD3R and E8500 at 9.5 x 400 for my safe 24/7 right now. Still trying to tweak bios settings for my 4.0 - 4.25 GHz. This is where the brain fart comes in...when shooting for 4 GHz (8x500) I get BSOD upon booting...That's a Vcore thing right?
Thanks for the help everyone, right now got no plan to push it further probably in the winter when the weather gets cooler I hope to break 20k under 3Dmark06, currently top out around 195xx.
lowered some volts, namely vdimm and vcore, looking good so far. . .
http://i34.tinypic.com/jzxwkh.png
Here are some EP45 shots from last night.
http://valid.canardpc.com/show_oc.php?id=1348286
http://valid.canardpc.com/show_oc.php?id=1343901
damn you really have an awesome chip there:up:me wants me wants:DQuote:
Originally Posted by l0ud_sil3nc3
looks like fun.i need to get a pot and give it a go.my P5Q-deluxe is begging for it:DQuote:
Originally Posted by NoGuru
I wouldn't mind seeing some Everest scores of that 5+Ghz run :0Quote:
Originally Posted by NoGuru
wow thats such a nice chip congrats :up:Quote:
Originally Posted by l0ud_sil3nc3
grats my friend such nice scores there :up:Quote:
Originally Posted by NoGuru
:rofl:Quote:
Originally Posted by radaja