Air Cooled Gallery

Printable View

Show 100 post(s) from this thread on one page

03-15-2008, 07:15 PM
Brian MP5T

Quote:

Originally Posted by HaGGaRd

Brian, your Antec 900 has ventilation holes and not the 2 rubber inlets for water cooling tubes? :o

Correct.... Generation One..

http://i28.tinypic.com/142a14z.jpg

http://i25.tinypic.com/ics94y.jpg
03-15-2008, 08:44 PM
bauer

Nice pics Tommy

again ^^
03-15-2008, 11:28 PM
IKIKUINTHENUTZ

I want a tri pod ><

I want to make some slow sync pics :(
03-15-2008, 11:59 PM
cabbspapp

Me too, I never think about buying one until I decide to take pics of my case lol.
03-16-2008, 01:08 AM
Houdini

I seriously need to get my cm stacker cleaned, and get proper cable management. It seems I just don't have the skills or the patience to do it right.

Overall there are some impressive pictures.
03-16-2008, 01:10 AM
cabbspapp

Quote:

Originally Posted by Houdini

I seriously need to get my cm stacker cleaned, and get proper cable management. It seems I just don't have the skills or the patience to do it right.

Overall there are some impressive pictures.

You gotta get creative sometimes. Just experiment with what looks good and such. Modding can be fun too.
03-16-2008, 01:10 AM
Tommy_Hewitt

Quote:

Originally Posted by Demo

Tommy, About how much temp drop do you get from that VGA backside cooler?

It depends...if the casefans run very slow, then I'll have a tempdrop about 6-10°C :shocked:
03-16-2008, 04:48 AM
HaGGaRd

Quote:

Originally Posted by Brian MP5T

Correct.... Generation One..

http://i28.tinypic.com/142a14z.jpg

http://i25.tinypic.com/ics94y.jpg

Sweeet man. good job. love the colour combination :)

EDIT:
oh yeah and brian, what ever happened to your VF1000's?
well I think you had them anyway
03-16-2008, 04:52 AM
gurusan

Here's my ghettotastic setup

http://i257.photobucket.com/albums/h...3162Medium.jpg

http://i257.photobucket.com/albums/h...3164Medium.jpg
03-16-2008, 05:21 AM
Dynacore

Quote:

Originally Posted by cloned

I just use a really small flathead screwdrive. I mean the really tiny ones that are used for working with small electronics.

Hmmm... couldn't get those connectors off. Tried it with staples like I read in a short guide. But those things were really stuck.
Ended up wrapping some electrical tape around the ends, also does the trick.

http://i27.tinypic.com/dg6m3a.jpg
03-16-2008, 05:25 AM
Jsunn

Quote:

Originally Posted by su3_zero

My pc... Box Cooled :(

http://i26.photobucket.com/albums/c1...e/IMG_2110.jpg

Nice Subaru!!

<--- '02 WRX Sedan, platinum Silver.

-J
03-16-2008, 08:28 AM
NickS

Quote:

Originally Posted by Jsunn

Nice Subaru!!

<--- '02 WRX Sedan, platinum Silver.

-J

lol bugeye. Original transmission? :D ;)

jk man. any mods? stage 2 yet? haha :)
03-16-2008, 09:59 AM
J*Bishop

Quote:

Originally Posted by Jsunn

Nice Subaru!!

<--- '02 WRX Sedan, platinum Silver.

-J

nice to see a couple suby owners on the board. :D

<<04 wrx psm wagon.
03-16-2008, 11:34 AM
quik_2_win

Quote:

Originally Posted by illidan

Tommy how often do u clean your case :D

awsome pictrs again!

Tommy- beautiful work, and excellent images. Truly art.
03-16-2008, 02:21 PM
Emerica

Quote:

Originally Posted by gurusan

Here's my ghettotastic setup

http://i257.photobucket.com/albums/h...3162Medium.jpg

http://i257.photobucket.com/albums/h...3164Medium.jpg

It looks like you have enough room to go for double fans...
03-16-2008, 02:46 PM
illidan

http://img80.imageshack.us/img80/446...2008781ep8.jpg

i don't have fuji s6500fd :D
nokia n73... carl zeiss ftw :woot:
03-16-2008, 03:31 PM
cabbspapp

http://i7.photobucket.com/albums/y26...p/IMG_1098.jpg
03-16-2008, 05:22 PM
Cpl Ledanek

Quote:

Originally Posted by Brian MP5T

http://i28.tinypic.com/2v7tikw.jpg

I was going to ask where to get those "Top Secret" tape, but you might just reply with: "Top Secret."
:rofl:
03-16-2008, 05:29 PM
cegras

Quote:

Originally Posted by illidan

http://img80.imageshack.us/img80/446...2008781ep8.jpg

i don't have fuji s6500fd :D
nokia n73... carl zeiss ftw :woot:

Is .. that a S-Flex jammed on the zalman?
03-16-2008, 05:54 PM
Vapor

cabbspapp, what case and temp display unit?
03-16-2008, 06:05 PM
cabbspapp

Tagan Aplus Black Pearl WCR, or a V2000 clone with some differences.. Temp display came with it. It's about 1-2 inches wider than a 5.25" bay. It displays RPM and can control 4 or 5 fans, I didn't count the plugs on it.

http://www.newegg.com/Product/Produc...82E16811294001
03-16-2008, 07:32 PM
emoners

@cabbspapp: no optical drive?

@Tommy: nice pics! :up: what happened to the AC Accelero Xtreme?
03-16-2008, 08:01 PM
cabbspapp

I have an external one sitting on my desk.
03-17-2008, 11:19 AM
illidan

Quote:

Originally Posted by cegras

Is .. that a S-Flex jammed on the zalman?

nope... original zalman fan which comes on 7700cu... working @ 950rpm :)
03-17-2008, 12:30 PM
deepsilver

Quote:

Originally Posted by cabbspapp

http://i7.photobucket.com/albums/y26...p/IMG_1098.jpg

Delta on the cooler?? :D
03-17-2008, 12:43 PM
Vapor

Looks like a San Ace 101.
03-17-2008, 01:33 PM
cabbspapp

Quote:

Originally Posted by Vapor

Looks like a San Ace 101.

You got it.
03-17-2008, 09:16 PM
Obitus

My Xigmatek

http://img262.imageshack.us/img262/5152/001gy0.jpg
03-18-2008, 03:41 AM
Morais

Hi Obitus, nice Cabble management
How hot is the northbridge and pwm heatsink?
03-18-2008, 05:20 AM
Obitus

Quote:

Originally Posted by Morais

Hi Obitus, nice Cabble management
How hot is the northbridge and pwm heatsink?

Don't really know. :P I've never checked. Not even sure where to look for that.

And thanks for the compliment. :)
03-18-2008, 08:45 AM
Morais

Its easy, stick the finger onto it :poke: (in load of course:p: ) Im interested in this mboard
03-18-2008, 03:05 PM
phillip684

Quote:

Originally Posted by Obitus

My Xigmatek

http://img262.imageshack.us/img262/5152/001gy0.jpg

Did you buy flex force cables, or did it come with those type of cables? If you bought them, can you PM me where I can buy the flexforce cables...
03-18-2008, 09:21 PM
redrumy3

tried cleaning up my wires a bit, really need a corsair modular psu, going to buy the window sidepanel on newegg for 30 bucks since i cant do one myself cause i suck at modding stuff lol

http://img299.imageshack.us/img299/8207/img4030cq5.jpg
03-19-2008, 04:02 AM
it_burns_when_i_pee

Quote:

Originally Posted by redrumy3

tried cleaning up my wires a bit, really need a corsair modular psu, going to buy the window sidepanel on newegg for 30 bucks since i cant do one myself cause i suck at modding stuff lol

http://img299.imageshack.us/img299/8207/img4030cq5.jpg

whoa! 11 fans (that i can see). you wanna try lapping heatsinks and use good thermal paste, with better heat transference you can afford to lose some fans and have other fans spinning slower ... thats what i've done. up until yesterday my system was silent (apart from the raptors grinding away), but one of the nexus fans is giving me a whirring sound now
03-19-2008, 09:16 AM
redrumy3

Quote:

Originally Posted by it_burns_when_i_pee

whoa! 11 fans (that i can see). you wanna try lapping heatsinks and use good thermal paste, with better heat transference you can afford to lose some fans and have other fans spinning slower ... thats what i've done. up until yesterday my system was silent (apart from the raptors grinding away), but one of the nexus fans is giving me a whirring sound now

80mm on the right side of case cooling back of motherboard too :D

:P but my temps are great on both gpu and cpu plus i always have headset on so noise really doesnt bother me i never tried lapping kinda scared of messing up heatsink :P cpu @ 3.6 idles 34 on two core and 37 on other two load is about 55c on prime and gpu idles 34c and load is about 45 :)
03-19-2008, 10:28 AM
Brian MP5T

^^ Your Fan-Puter is in need of some work Cuz...

It's F---ed
03-19-2008, 02:36 PM
it_burns_when_i_pee

Quote:

Originally Posted by redrumy3

80mm on the right side of case cooling back of motherboard too :D

:P but my temps are great on both gpu and cpu plus i always have headset on so noise really doesnt bother me i never tried lapping kinda scared of messing up heatsink :P cpu @ 3.6 idles 34 on two core and 37 on other two load is about 55c on prime and gpu idles 34c and load is about 45 :)

you should try lapping, there's loads of metal to work with considering your just working with micro layers. temps will deffinately go down, i have only 5 12cm fans, 3 x 1000rpm, 1 x 800rpm, 1 x 1200rpm and my idle and load temps are well below yours. if i put faster fans on i shave a few more degrees but imhappy with my setup for now.

upto you though, sound is a thing for me, maybe its my ears cos 2 things i want is a quiet machine and quality speakers / headphones

i even modded the fan / cooling on my digital tv set top box, and put in sound proofing cos of the HDD. i think im a bit fussy. time will tell, im just modding a dell xps case to standard atx, gonna thread it soon.
03-19-2008, 02:40 PM
illidan

man u have awsome nick !!
03-19-2008, 02:42 PM
jigit

it's my computer.http://intra.biysk.ru/forum/download.php?id=38242
http://intra.biysk.ru/forum/download.php?id=38241
http://intra.biysk.ru/forum/download.php?id=38240
http://intra.biysk.ru/forum/download.php?id=38245
http://intra.biysk.ru/forum/download.php?id=38244
03-19-2008, 02:49 PM
illidan

like a pile of junk :D
03-19-2008, 03:31 PM
Emerica

Quote:

Originally Posted by jigit

it's my computer.http://intra.biysk.ru/forum/download.php?id=38242
http://intra.biysk.ru/forum/download.php?id=38241
http://intra.biysk.ru/forum/download.php?id=38240
http://intra.biysk.ru/forum/download.php?id=38245
http://intra.biysk.ru/forum/download.php?id=38244

That looks super ghetto.
03-19-2008, 05:58 PM
cloned

Quote:

Originally Posted by it_burns_when_i_pee

you should try lapping, there's loads of metal to work with considering your just working with micro layers. temps will deffinately go down, i have only 5 12cm fans, 3 x 1000rpm, 1 x 800rpm, 1 x 1200rpm and my idle and load temps are well below yours. if i put faster fans on i shave a few more degrees but imhappy with my setup for now.

upto you though, sound is a thing for me, maybe its my ears cos 2 things i want is a quiet machine and quality speakers / headphones

i even modded the fan / cooling on my digital tv set top box, and put in sound proofing cos of the HDD. i think im a bit fussy. time will tell, im just modding a dell xps case to standard atx, gonna thread it soon.

I second his suggestion, even though I didn't lap my HS because it is working fine for me right now. It will definitely help with cooling. Also you could try to find which fans are not doing much of anything. Like the one under your tunig tower, I don't think it does much other than make more noise.

Also Burns may I suggest you mod the case to inverted-ATX, much less work and better cooling most likely.
03-19-2008, 06:35 PM
Ar3s

you have so many ccfls but your camera has no flash ????
03-19-2008, 09:43 PM
jigit

This pictures from captured AVI by videocam.
03-20-2008, 03:29 AM
OCZ«

More ghetto pics

http://aycu27.webshots.com/image/495...7204767_rs.jpg
http://aycu24.webshots.com/image/479...3533358_rs.jpg
03-20-2008, 03:31 AM
JaYp146

OCZ« , your case is amazing. Never before have I seen such translucence.

:D
03-20-2008, 03:43 AM
darkorb

http://img152.imageshack.us/img152/2...0510dk1.th.jpg

My old setup when i tried the 320mb and the 640mb in SLI. Didnt work :(

Current setup

[img=http://img172.imageshack.us/img172/111/img00293lu9.th.jpg]
03-20-2008, 08:48 PM
emoners

Any new CPU coolers out? I know the TRUE is still very very good, but it's kinda getting old on me. :shrug:
03-21-2008, 11:46 AM
HaGGaRd

Quote:

Originally Posted by emoners

Any new CPU coolers out? I know the TRUE is still very very good, but it's kinda getting old on me. :shrug:

I think there's a new DuoOrb CPU heatsink out now by Thermalright, like the GPU one but bigger and im guessing better.
We'll have to see!
03-21-2008, 03:17 PM
perfection

Quote:

Originally Posted by HaGGaRd

I think there's a new DuoOrb CPU heatsink out now by Thermalright

by thermaltake not thermalright
03-22-2008, 02:20 AM
Techie

my attempt to build a clean antec 900:

http://i172.photobucket.com/albums/w...lbum/rafpc.jpg
03-22-2008, 02:27 AM
massman

Looks really clean, good job fellow belgian XS-er ;-) :D
03-22-2008, 05:55 AM
Eagler

Here is my rig. It's hard to have cleaned cables in this case without hit to metal.
http://img145.imageshack.us/img145/8794/image01uv8.jpg
http://img233.imageshack.us/img233/6567/image02tn3.jpg
http://img132.imageshack.us/img132/2526/image03ba4.jpg
http://img145.imageshack.us/img145/1386/image05lk5.jpg
03-22-2008, 07:07 AM
bluep3ace

Quote:

Originally Posted by Emerica

That looks super ghetto.

That's hardcore, not ghetto.
Add some multicolored fans and this is ghetto.
http://lib.store.yahoo.net/lib/xoxide/xbladeblack5.jpg
03-22-2008, 07:32 AM
Steffen

http://www.abload.de/img/dscf10206hcuh8.jpg

http://www.abload.de/img/dscf1049gx4.jpg

http://www.abload.de/img/dscf10553ya.jpg

http://www.abload.de/img/dscf1058kv9.jpg
03-22-2008, 09:47 AM
Tarowah

New case.

http://img.villagephotos.com/p/2005-...anedRocket.JPG

Airflow wasnt that great so I installed a blow hole so the NV120 would have some cool air.

http://img.villagephotos.com/p/2005-...zedoutside.jpg
03-22-2008, 11:33 AM
HaGGaRd

Quote:

Originally Posted by perfection

by thermaltake not thermalright

lmao, sorry but just to many people always talking about thermalright, ^^
my bad :(
03-22-2008, 11:37 AM
HaGGaRd

Quote:

Originally Posted by Steffen

http://www.abload.de/img/dscf10206hcuh8.jpg

http://www.abload.de/img/dscf1049gx4.jpg

http://www.abload.de/img/dscf10553ya.jpg

http://www.abload.de/img/dscf1058kv9.jpg

steffan, just, pure-amazement :)
03-22-2008, 11:43 AM
HaGGaRd

This

http://www.gizmosforgeeks.com/wordpr...vil_aa280_.jpg

+

http://www.nvnews.net/reviews/xfx_ge...ts_512mb_s.jpg

+

http://www.pcsilent.de/ppic_MAXI_Zal...k_zmvf1000.jpg

Comes Tuesday :)
03-22-2008, 12:36 PM
Unrealer

http://i38.photobucket.com/albums/e1...2/DSC05986.jpg
http://i38.photobucket.com/albums/e1...2/DSC05992.jpg
http://i38.photobucket.com/albums/e1...2/DSC06032.jpg
http://i38.photobucket.com/albums/e1...2/DSC06051.jpg
http://i38.photobucket.com/albums/e1...2/DSC06054.jpg
http://i38.photobucket.com/albums/e1...2/DSC06059.jpg
03-22-2008, 01:24 PM
SplinterBR

http://img207.imageshack.us/img207/9149/dsc05383no8.jpg
:shrug:
03-22-2008, 02:29 PM
cabbspapp

Just got a Dominator Airflow fan.

http://i7.photobucket.com/albums/y26...p/IMG_1115.jpg
03-22-2008, 02:59 PM
HaGGaRd

Nice! looks good.
Maybe you should of gone for the OCZ ram cooler though for a lower profile to your memory ^^
03-22-2008, 03:12 PM
Pisu87

http://www.pctunerup.com/up/results/...ICT0018_XS.jpg

Any ideas on how to arrange the cables in my case? The motherboard tray is unremovable so I don't really know where to hide them :D
03-22-2008, 03:46 PM
cabbspapp

Quote:

Originally Posted by HaGGaRd

Nice! looks good.
Maybe you should of gone for the OCZ ram cooler though for a lower profile to your memory ^^

I don't really like the OCZ cooler. I read that the Corsair got lower temps than the OCZ.
03-22-2008, 03:52 PM
Origin_Unknown

Quote:

Originally Posted by HaGGaRd

Nice! looks good.
Maybe you should of gone for the OCZ ram cooler though for a lower profile to your memory ^^

ive just bought the dominator fan and wish i'd gone for something lower or even the hr-09-duo's as the dominator just sits so high on the ram
03-23-2008, 12:43 AM
HaGGaRd

ah yeah, the only problem I would find using the corsair cooler is does it block much airflow to your CPU HSF? I suppose it would be okay if you had a w/c setup, ah well, I dont know.. :p
03-23-2008, 01:07 AM
cabbspapp

Temps didn't change hardly at all, so I'm not too worried about it. Liquid may be happening in the future, but that's after a new mobo. It would be pointless on a mobo with a wall at 420 FSB.
03-23-2008, 03:18 AM
Techie

Yesterday, I rebuilded a friend's pc.

The case is an antec plusview II:

http://i172.photobucket.com/albums/w...m/DSCN1467.jpg

http://i172.photobucket.com/albums/w...m/DSCN1473.jpg
03-23-2008, 03:48 AM
Da_maniaC

Pc Pics 22-03-08:

http://members.home.nl/djthesp/PC/PC2_22-03-08-th.jpg

http://members.home.nl/djthesp/PC/PC1_22-03-08-th.jpg

Hardware:

Asus Maximus Formula
Intel Core2Duo E8400 @ 3,6 GHz
Zalman Fatal1ty FS-C77
OCZ ReaperX 4GB PC6400 Kit of 2 (4-3-3)
OCZ ModXstream 780 Watt
XFX Geforce 8600GT [Will be replaced by a 8800GTX or 9800GTX soon].

2x Seagate 7200.10 320GB (in RAID 0) [Will be replaced by 2x RaptorX in RAID 0).
2x Western Digital RE2 750GB (in RAID 1)
NEC ND-4500A (Will be replaced by a Plextor PX-800 or so)
Akasa Eclipse-62
2x Aerocool Aeroturbine 3000

Samsung 913N (19"TFT, 8ms response time)
Logitech G15 keyboard
Logitech MX518 mouse (With Hyperglides)
Logitech Rumblepad II
Logitech Formula Force Feedback Wheel
Sennheiser PC140 Headset

:D
03-23-2008, 06:43 AM
bauer

Awesome Steffen
03-23-2008, 10:28 AM
Khalmyr

not very good but oh well

my case doesn't have a removable mobo tray, so it's impossible to hide cables =(

Old P5W-DH Deluxe
http://img381.imageshack.us/img381/7...ures043wd5.jpg

New Gigabyte P35-DS3
http://img237.imageshack.us/img237/5963/dscf9200es4.jpg
03-24-2008, 10:31 AM
alexey

My new case with a Sonic Tower dual fan :D

http://img132.imageshack.us/img132/7...achmentrj4.jpg

http://img132.imageshack.us/img132/3...achmentfe6.jpg

http://img135.imageshack.us/img135/3...achmentqz1.jpg

http://img135.imageshack.us/img135/9...achmentjx1.jpg

http://img229.imageshack.us/img229/5...achmentfq5.jpg

http://img229.imageshack.us/img229/6...achmentfh9.jpg

http://img37.picoodle.com/img/img37/...5m_ff288e1.jpg

http://img02.picoodle.com/img/img02/...6m_5b7e79f.jpg
03-24-2008, 10:34 AM
cyberspyder

holy :banana::banana::banana::banana: the pictures are big...I had to sroll on my 20" widescreen ROFL
03-24-2008, 10:41 AM
alexey

Quote:

Originally Posted by cyberspyder

holy :banana::banana::banana::banana: the pictures are big...I had to sroll on my 20" widescreen ROFL

Sorry for that...i've resized them... :D
I thought they will resize automaticaly:rolleyes:
03-24-2008, 12:30 PM
HaGGaRd

RIGHT GUYS!

finally finished my final mod on my Lian Li PC-60 Plus II case.

Actions taken:
- Ive made a second 80mm blow hole at the back of the motherboard tray for additional airflow.
- Removed some support bars on the side bracket for a cleaner look.
- Added rubber edging to almost everything I can edge lol.

So yeah here it is..

http://i80.photobucket.com/albums/j1...GaRd1337/1.jpg

Fans / Window

http://i80.photobucket.com/albums/j1...GaRd1337/2.jpg

http://i80.photobucket.com/albums/j1...GaRd1337/3.jpg
Close up view

http://i80.photobucket.com/albums/j1...GaRd1337/5.jpg
Behind view

http://i80.photobucket.com/albums/j1...GaRd1337/6.jpg
Front 120mm in place and edged.

I'm really happy on how this has all turned out :)

Comments appreciated thankyou!
03-24-2008, 12:36 PM
taylormsj

Lan
03-24-2008, 11:04 PM
emoners

guys any suggestions for a PCI exhaust fan?
03-25-2008, 12:42 PM
HaGGaRd

Heres my fans on test (using my current computer) to see how it looks one fan at a time:

http://i80.photobucket.com/albums/j1...7/fantest1.jpg

http://i80.photobucket.com/albums/j1...7/fantest5.jpg

http://i80.photobucket.com/albums/j1...7/fantest4.jpg

http://i80.photobucket.com/albums/j1...7/fantest3.jpg

http://i80.photobucket.com/albums/j1...7/fantest2.jpg

:D
03-26-2008, 08:39 AM
fungry

Here is my setup. First time posting here :)
Attempting to improve the cable management but I think the lian li case is hindering my attempts ;)

http://img526.imageshack.us/img526/1540/snv12298ot8.jpg

hr05 SLI/IFX w/ fan intaking the heat that is radiating from the gpu ^^
http://img443.imageshack.us/img443/9044/snv12299vy2.jpg

http://img443.imageshack.us/img443/7899/snv12300rj2.jpg

http://img223.imageshack.us/img223/8455/snv12301vv4.jpg
03-26-2008, 10:23 AM
Olivier

Sponsored

Quote:

Originally Posted by fungry

Here is my setup. First time posting here :)
Attempting to improve the cable management but I think the lian li case is hindering my attempts ;)

http://img526.imageshack.us/img526/1540/snv12298ot8.jpg

hr05 SLI/IFX w/ fan intaking the heat that is radiating from the gpu ^^
http://img443.imageshack.us/img443/9044/snv12299vy2.jpg

http://img443.imageshack.us/img443/7899/snv12300rj2.jpg

http://img223.imageshack.us/img223/8455/snv12301vv4.jpg

Are you sponsored by TT or ziptie??;) :D .......only joking.......you must get interesting temps with that setup
03-26-2008, 11:44 AM
dnb#

Welcome! and hf on this forums! keep your wallet as close as you can because from now you're going to spend MUCH $
03-26-2008, 12:16 PM
illidan

Quote:

Originally Posted by Olivier

Are you sponsored by TT or ziptie??;) :D

u meen TR :)
03-26-2008, 12:37 PM
KaOSoFt

Wow, you guys have some pretty, and I mean, some pretty nice systems built.

Here's mine, plain and simple, but effective (in terms of noise and performance):

http://www.uploadfilesystem.com/arch...4/oZy02812.jpg

I replaced the included fans with two Zalman ZM-F3 (front intake and rear exhaust), and also put a Sanyo Denki San Ace 109R1212H1011 (120mm x 38mm) as the heatsink fan.

I hope it helps... any suggestions or tips for improvement would be kindly received.
03-26-2008, 12:56 PM
Origin_Unknown

Quote:

Originally Posted by Olivier

Are you sponsored by TT or ziptie??;) :D .......only joking.......you must get interesting temps with that setup

thats nothing to the amount of cable ties i have in my case..
03-26-2008, 06:47 PM
fungry

Haha I think I already spend too much money. It is already sad enough that I can't make use of my other TR HR05s.... because the screw that goes through the hole for the southbridge will impede the installation of the gpu. ZZZZZZZ

the setup may change in a day or two because i don't like how the SATA cables are stretched from the very bottom to the very top of the case.

As for my temperatures. When I mount the fan on the HR05 for the northbridge, it drops from 46 degrees to 39 degrees (active cooling). The CPU idles at 30 degrees (with overclock settings) and the load temperature is around 53 degrees. At stock settings (1.86ghz etc), the cpu idles at 23 degrees.
03-26-2008, 07:53 PM
Ar3s

Quote:

Originally Posted by fungry

Haha I think I already spend too much money. It is already sad enough that I can't make use of my other TR HR05s.... because the screw that goes through the hole for the southbridge will impede the installation of the gpu. ZZZZZZZ

the setup may change in a day or two because i don't like how the SATA cables are stretched from the very bottom to the very top of the case.

As for my temperatures. When I mount the fan on the HR05 for the northbridge, it drops from 46 degrees to 39 degrees (active cooling). The CPU idles at 30 degrees (with overclock settings) and the load temperature is around 53 degrees. At stock settings (1.86ghz etc), the cpu idles at 23 degrees.

same thing happened to me when i wanted to add in my 2nd gpu. now the whole rig is down cause i have no idea what happened it just doesn't wanna display anything.
03-27-2008, 05:53 AM
fungry

Quote:

Originally Posted by Ar3s

same thing happened to me when i wanted to add in my 2nd gpu. now the whole rig is down cause i have no idea what happened it just doesn't wanna display anything.

ow ><... well i got hit by bad luck. After posting the pictures up, I went on to cable manage. Upon fixing everything up... i kept getting BSOD with stop error code C0000218 (hard error). Till this very moment, I still have no clue what is the causation of the error. Initial guess was a corrupted hard drive but then again :shrug: ... but i think it turned out to be the memory.

Ended up hooting a Western Digital GP 500gb and an extra tube of AS5 haha. Pictures to come soon once I am done installing all the junk onto the PC.
03-28-2008, 02:55 AM
Origin_Unknown

Quote:

Originally Posted by cabbspapp

Just got a Dominator Airflow fan.

http://i7.photobucket.com/albums/y26...p/IMG_1115.jpg

ive just got one too and taken all the stickers of -it looks 200x better! you should take the ones off the side too :up:
03-28-2008, 03:20 AM
Ar3s

Quote:

Originally Posted by fungry

ow ><... well i got hit by bad luck. After posting the pictures up, I went on to cable manage. Upon fixing everything up... i kept getting BSOD with stop error code C0000218 (hard error). Till this very moment, I still have no clue what is the causation of the error. Initial guess was a corrupted hard drive but then again :shrug: ... but i think it turned out to be the memory.

Ended up hooting a Western Digital GP 500gb and an extra tube of AS5 haha. Pictures to come soon once I am done installing all the junk onto the PC.

i'm back on stock and all those Thermalright heatsinks are in their boxes. lets see hr05 ifx sli hr05 ifx hr03gt hr03gt true hr09s hr09u baaaaaahhhh
03-28-2008, 12:19 PM
Obitus

Quote:

Originally Posted by phillip684

Did you buy flex force cables, or did it come with those type of cables? If you bought them, can you PM me where I can buy the flexforce cables...

The PSU comes with those cables.

Here is a pic of the final build after a got my last drive in.

http://img206.imageshack.us/img206/5985/pict0029mv7.jpg
03-28-2008, 04:11 PM
Da_maniaC

Pc Pics 28-03-08:
(Graphics Cards Updated!)

http://members.home.nl/djthesp/PC/PC_28-03-08-3_th.jpg

http://members.home.nl/djthesp/PC/PC_28-03-08-1_th.jpg

Hardware:

Asus Maximus Formula
Intel Core2Duo E8400 @ 3,6 GHz
Zalman Fatal1ty FS-C77
OCZ ReaperX 4GB PC6400 Kit of 2 (4-4-3)
OCZ ModXstream 780 Watt
XFX Geforce 8800GTX Xtreme

2x Seagate 7200.10 320GB (in RAID 0) [Will be replaced by 2x RaptorX in RAID 0).
2x Western Digital RE2 750GB (in RAID 1)
NEC ND-4500A (Will be replaced by a Plextor PX-800 or so)
Akasa Eclipse-62
2x Aerocool Aeroturbine 3000

Samsung 913N (19"TFT, 8ms response time)
Logitech G15 keyboard
Logitech MX518 mouse (With Hyperglides)
Logitech Rumblepad II
Logitech Formula Force Feedback Wheel
Sennheiser PC140 Headset

:D
03-29-2008, 06:12 AM
HaGGaRd

Keep the pics coming ^^
03-29-2008, 06:14 AM
HaGGaRd

Oh yeah I also have updated pics of my Lian Li that I will post later on this week..
03-29-2008, 08:41 AM
fungry

Quote:

Originally Posted by HaGGaRd

Oh yeah I also have updated pics of my Lian Li that I will post later on this week..

looking forward to them ;)
03-29-2008, 10:45 AM
dark-redeemer

http://www.abload.de/thumb/1nnfr3.jpg http://www.abload.de/thumb/2iciu8.jpg http://www.abload.de/thumb/2rjty4.jpg
03-29-2008, 12:54 PM
HaGGaRd

Quote:

Originally Posted by fungry

looking forward to them ;)

:D !
03-29-2008, 12:59 PM
HaGGaRd

Nice computer Dark Redeemer very clean and precise
03-29-2008, 07:13 PM
Darkatom

Quote:

Originally Posted by cabbspapp

Just got a Dominator Airflow fan.

http://i7.photobucket.com/albums/y26...p/IMG_1115.jpg

I just bought this case today at my local Fry's. I must say this seems to be a better quality case compared to my TJ09. Overall im very pleased and excited about making the switch back to air :up: .
03-29-2008, 08:18 PM
cabbspapp

I love this case. Can't say about the TJ09, but much, much better coming out of a 900.

I'll get around to removing the side stickers.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:27 PM.

XtremeSystems