EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

06-20-2010, 08:48 AM
kagula323

Quote:

Originally Posted by radaja

i knew you would do good.congratulation on placing third.:up:
very nice results my friend:D

Quote:

Originally Posted by andressergio

just awesome mate congrats :up:

thanks radaja and andressergio :)
06-20-2010, 03:34 PM
OC Nub

OK, just installed the UD3P rev1.0, a q9650 and some G.Skill PI's. I hope it will be fun again to try this platform. My goal is to get 4500mhz LinX stable, but that will be hard to do.

EDIT, maybe I have bitten off more than I can chew. The first few attemps have brought my new watercooling to its knees.
06-20-2010, 04:17 PM
andressergio

Quote:

Originally Posted by OC Nub

OK, just installed the UD3P rev1.0, a q9650 and some G.Skill PI's. I hope it will be fun again to try this platform. My goal is to get 4500mhz LinX stable, but that will be hard to do.

EDIT, maybe I have bitten off more than I can chew. The first few attemps have brought my new watercooling to its knees.

nice to have you back in the thread :up:
06-20-2010, 04:58 PM
OC Nub

Thanks Sergio, glad to be back among the fine people in this thread. This is where I had the most fun overclocking, and learned the most.

Well, that was short lived, there is no way to control temps in linx at 4500. I am still on the UD3P though, trying my old e8400co to see if that can do 4500mhz. I cant remember the ref's for that but have been trying different things.
06-20-2010, 05:06 PM
andressergio

Quote:

Originally Posted by OC Nub

Thanks Sergio, glad to be back among the fine people in this thread. This is where I had the most fun overclocking, and learned the most.

Well, that was short lived, there is no way to control temps in linx at 4500. I am still on the UD3P though, trying my old e8400co to see if that can do 4500mhz. I cant remember the ref's for that but have been trying different things.

not even with the AC ? damn vid makes a real difference...my 1,1875 was hell...

well hope you find the way maybe on a cooler day pumping AC to the rad

Cheers :toast:
Sergio
06-20-2010, 05:08 PM
radaja

OC Nub,you should just send me the Q9650 because my WCing can handle it:rofl:J/K
what kind of temps are you seeing?
06-20-2010, 05:38 PM
OC Nub

I ran blend first at 4500mhz and in 8k it was in the upper 50's c. In Linx it shot to 80c, its a 1.175vid chip and always was hard to cool.
I had the AC on it and still went crazy high in LinX, the newer platforms/chips handle LinX better.
Do you happen to remember the ref's for the e8400's?

Thanks.
Tom
06-20-2010, 05:41 PM
radaja

mine liked it like this.with vtt at 1.28v cpu ref at normal(0.760) and mch at 0.750 bios 0.70 ET6
06-20-2010, 05:44 PM
OC Nub

Thanks, I will try that, has been a while and couldnt remember.
06-20-2010, 06:03 PM
OC Nub

Those ref's work nice, thanks radaja.

This chip has bad sensors idle and load, have no clue what the actual temps are.

Im just using an old 2x1gb kit of dominators.
06-20-2010, 06:23 PM
radaja

nice,glad i could help.im sure your temps with the duallie are fine:up:
06-20-2010, 06:41 PM
OC Nub

First couple runs were at 4ghz, at 4100mhz now just doing short runs using the 8 multi. The 2gb of mem helps speed things up also, I am sure it requires more vcore with 4gb of mem but this is fast and fun, no 1hr+ runs to see if it passes.

http://img294.imageshack.us/img294/4845/4100cochip.png

Uploaded with ImageShack.us

http://img341.imageshack.us/img341/166/4100pass.png

Uploaded with ImageShack.us
06-20-2010, 07:02 PM
andressergio

Quote:

Originally Posted by OC Nub

First couple runs were at 4ghz, at 4100mhz now just doing short runs using the 8 multi. The 2gb of mem helps speed things up also, I am sure it requires more vcore with 4gb of mem but this is fast and fun, no 1hr+ runs to see if it passes.

http://img294.imageshack.us/img294/4845/4100cochip.png

Uploaded with ImageShack.us

http://img341.imageshack.us/img341/166/4100pass.png

keep it up Tom :up: those are nice results, hope mazda dont come again lmao

cheers :toast:
Sergio
06-20-2010, 08:04 PM
OC Nub

LMAO Sergio

I cant seem to get the gflops to go any higher than 27-28 in linx, normally the higher mhz the higher the gflops. This is where I am at now.

I restarted it several times to try and get gflops higher but the same results each time.

http://img155.imageshack.us/img155/2...4004300mhz.png

Uploaded with ImageShack.us
06-21-2010, 08:41 AM
OC Nub

Still working on this chip, failed at 20 passes.:mad:

http://img205.imageshack.us/img205/3...00failat20.png

Uploaded with ImageShack.us
06-21-2010, 09:01 AM
NoGuru

Try cranking up the MCH OC Nub.
06-21-2010, 03:21 PM
OC Nub

I uninstalled the board, the newer boards that recover from a bad oc have ruined me for this platform or at least the older p45's. The boot loops are to frequent, or maybe I have turned into a wimp.
06-21-2010, 08:09 PM
radaja

just placed a wanted ad in the wanted section.so i thought id ask you guys too.
im looking for an I/O shield for a UD3P and maybe just maybe,some one heres has
an extra one.i know i went through quite a few of these boards and i used to have
an extra laying around until i gave it to some else who needed it.now i find myself
in a similar situation,i just got a board but didnt get the I/O shield and now need one.
so if any of my fellow UD3P users have an extra please PM me.thanks

EDIT-thanks NoGuru for coming to my aid:up:
06-22-2010, 02:50 PM
andressergio

Usb3p

Well guys finally my Stalent 2200 CL8 kit arrived today looks awesome :D
I want to thank my friend Tracy ;) for the great help :up:

it just outperform my Gskill PI 2000 CL6, it was so easy to tight timmings at stock volts and pass this tests...

X3380@ 4500
Stalent 2200 CL8@ 1600 6-6-6-18 PL7 1,65vdimm stock

http://img687.imageshack.us/img687/5546/p10409661.jpg

http://img526.imageshack.us/img526/4...cr2pl7hype.jpg

http://img25.imageshack.us/img25/377...cr2pl7ever.png

cheers :toast:
Sergio
06-22-2010, 03:44 PM
radaja

andressergio,very nice:up:
so it was easier to do 1600 cl6 whith this kit?
cant wait to see how they can go on the P45
and then how low you can run the latency,cl5?maybe
06-22-2010, 03:47 PM
zsamz_

Quote:

Originally Posted by andressergio

Well guys finally my Stalent 2200 CL8 kit arrived today looks awesome :D
I want to thank my friend Tracy ;) for the great help :up:

it just outperform my Gskill PI 2000 CL6, it was so easy to tight timmings at stock volts and pass this tests...

X3380@ 4500
Stalent 2200 CL8@ 1600 6-6-6-18 PL7 1,65vdimm stock

[][/URL]

cheers :toast:
Sergio

nice but its still a gigabut:p:
try 2000+ cas7:yepp:
06-22-2010, 03:53 PM
OC Nub

Congrats Sergio!
06-22-2010, 04:10 PM
andressergio

Quote:

Originally Posted by radaja

andressergio,very nice:up:
so it was easier to do 1600 cl6 whith this kit?
cant wait to see how they can go on the P45
and then how low you can run the latency,cl5?maybe

100% easier than Gskills PI 2000 CL6 look this radaja still on stock volts

http://img101.imageshack.us/img101/2...cr2pl7spi3.jpg

Quote:

Originally Posted by zsamz_

nice but its still a gigabut:p:
try 2000+ cas7:yepp:

will try zsamz :up: just cant believe how nice are doing on 1600 PL7 tightening timmings

Quote:

Originally Posted by OC Nub

Congrats Sergio!

Thanks Tom :up:
06-22-2010, 04:11 PM
andressergio

Quote:

Originally Posted by radaja

just placed a wanted ad in the wanted section.so i thought id ask you guys too.
im looking for an I/O shield for a UD3P and maybe just maybe,some one heres has
an extra one.i know i went through quite a few of these boards and i used to have
an extra laying around until i gave it to some else who needed it.now i find myself
in a similar situation,i just got a board but didnt get the I/O shield and now need one.
so if any of my fellow UD3P users have an extra please PM me.thanks

EDIT-thanks NoGuru for coming to my aid:up:

wow you got the shield ? nice man NoGuru :up:
06-22-2010, 04:31 PM
andressergio

still dunno why i cant boot on 2000, was easier on the gskills but tighten timmings at 1600 love it :D really an amazing kit

http://img39.imageshack.us/img39/369...cr2pl7trfc.jpg

http://img641.imageshack.us/img641/3...cr2pl7trfc.jpg

http://img197.imageshack.us/img197/2...cr2pl7trfc.png

cheers :toast:
Sergio

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P