I've got myself a 165, CCB1E 0605 XPMW, just waiting on my power supply to turn up and i'll be giving her a work out soon, god i wish this PSU would hurry up, oh yeah and the batch number is 0008 :banana:
Printable View
I've got myself a 165, CCB1E 0605 XPMW, just waiting on my power supply to turn up and i'll be giving her a work out soon, god i wish this PSU would hurry up, oh yeah and the batch number is 0008 :banana:
My 0610 is prime stable for 10 hours + with small FFT's
http://img220.imageshack.us/img220/2...475vinb.th.jpg
But i cant get get it go an hour on large FFT's, I thought it may be my RAM so I tested with my spare OCZ 4200EL but the same result. :(
yea, i wish the chip screwed up and set its multi to 16, instead of the software screwing up and just displaying the wrong multi. a 165 with a 16x multi would be neat.Quote:
Originally Posted by HiJon89
Just got my 165 opty from monarch, it is a CCB1E 0609FPMW. :oscar: perhaps?
Now, just have to wait for my heatsink to come...:dammit:
nice, they are pumping out the good steppings like crazy :clap:Quote:
Originally Posted by Kobaltrock
Quote:
Originally Posted by Mastactor
TY :)
I am going to probally be retesting the chip again once I get watercooling.
My main goal right now is to get 268 stable on the memory, but I don't think its going to happen.
Got my CCB1E 0609FPMW from monarch. It's good, but not nearly as good as I hoped.. so far 2.74 has failed on stock voltage, 2.7 is going ok. Keep in mind it's about 80-85F out today, that could have something to do with it
2 Other steppings to avoid.
0534MPMW.. The first Opty 170 I owned. Wouldnt do 2.5
0546SPMW.. My Second 170 2.6 Needed 1.5 2.65-2.7 Needs 1.55
Quote:
Originally Posted by Repoman
Why did you get another chip repo? That CC1BE you have now is awsome.
That 0609 seems to be performing worse that the 0610.
New Ultra-D -> SLI-D installed, thanks Plywood99!
2850 on stock voltage right now, prime stable thus far (Reported 1.31v by smart gaurdian)
nice. 3000 @ 1.45 would be nice to see :)Quote:
Originally Posted by CompGeek
It's fun to test them, then if it's good I can make a quick buck off of it. I know I saw one good 0609 that had 2.96@1.4v, so they're not all that bad.Quote:
Originally Posted by Spazilton
BTW 0534 on 170 is bad, on 165 it was great for the time. I had one at 2.7@1.45v
Im now tryin 2950 @ 1.4v reported (1.45 actual)
Do you have a DMM compgeek? You can measure your actual vcore with it.. plus I'm curious to see how far it overvolts :p: Some people say there's only does an extra .01v under load, mine does .04
No I dont. Heres a ss:
1.45v set in BIOS, dual priming
http://img434.imageshack.us/img434/1945/cpu29495co.png
Thus far Im only 50mhz behind absolute0's CCB1E 0608MPMW, it did 3ghz @ 1.4v reported.
OK, 3072mhz @ 1.52 reported (1.55 set), we'll see how this goes.
EDIT: Meh, minute and a half. 3050 should be stable though.
should have a CCBBE0610DPMW waiting at home for me
3065/1.53 looks like my new 24/7...
DUDE! stop that prime now!!!!!!!!!!!!!!Quote:
Originally Posted by famich
did you not even notice it's not laoding your cpu???
it's just paging a huge file and thrashing your HDD's!!
DONT RUN BLEND IF IT SAYS PAGING!!!
Quote:
Originally Posted by famich
yea dude, that will destroy your HDDs. i started a thread about that, we started working with john on that issue. although i believe its OS related, not prime related
Follows the .1v/100MHz rule exactlyQuote:
Originally Posted by CompGeek
If my 0608 would do that, I'd have 3.2Ghz@1.6v :(
well in am now waiting for my opty to get here. I didnt make the cut off and fedex doesnt deliver on sat or sunday so i have to wait intill monday :( Was thinking of getting an "artic freezer 64 pro" for now. whats a good watercooling system or do you have to buy all the parts seperate for better results?
all parts seperate is my suggestion.