Hi Olli,Quote:
Originally Posted by OliverM84
Has this bios aready had the volts adjusted for 1.2?
Hodgy
Printable View
Hi Olli,Quote:
Originally Posted by OliverM84
Has this bios aready had the volts adjusted for 1.2?
Hodgy
Hi Guys, I get an error with trying to back up my bios on my 480. The message is bios reading not supported. I have seen a fix for this but it's for ATI cards, and the version is 0.4.3. Have any one you guys seen this and fixed it?
Thanks,
Hodgy.
Latest GPUz is 0.4.5. Try it.
Just watercooled my MSI N470GTX. Useless on air, 89c steady temp stock with peaks up to 94c til the fan catches up. Made the room smell like a hairdryer.
Hasn't done as much for my core overclock as i'd hoped, but I think I just got a crap gpu core (1050mv vid). Previous best in furmark was 766/1533/1900 @ 1037mv, gaming best was 800/1600/1674 @ 1087mv but I couldnt go near furmark due to temps.
Now I can do 850/1700/2050 @ 1137mv with furmark load in the low to mid 40s. Memory clock gain was 150mhz+, but you can't beat a dead horse and my gpu just won't keep up. 866/1733 takes 1175mv and 875mhz Blue/grey/black screens in Vantage @ any voltage up to 1212mv.
Still, happy with card, performance at 850/2050 is excellent and its now quiet and cool too. First foray into the bling factor and I keep catching myself oggling at that backplate while im sitting here :lol:.
http://i169.photobucket.com/albums/u...impedsmall.jpg
I absolutely understand you, that backplate looks great! :up:Quote:
Originally Posted by PiLsY
Is it optional, or does it come with the WB?
Optional - £17 extra. I told myself it stiffens the card and gives extra support for the waterblock ;).
C'mon, you bought it for the bling. ;) I would buy it just for the bling. :D I liked very much my GTX280s for having a backplates and I miss it on GTX480.Quote:
Originally Posted by PiLsY
Remembering when computers were couple of ugly green boards... :sick:
Sorry for the off-topic.
Thanks Boulard, but I went back to 0.4.4 and all is ok now! 0.4.5 does not work for me!Quote:
Originally Posted by Boulard83
Hehehe - guilty as charged :D.
My photographic "ability" just doesnt do the block justice, it looks twice as good in person.
Hi guys, any news about lod adjustement? now is possible?
Sup Guys , I just purchased a new Evga 480 GTX and it black screens within minutes of any 3D app. So I loaded up MSi Afterbuner and temps just in 2D was at 95C and 3D went to 103C+ with Kombuster before I stopped it so not to black screen in test. That normal? I did already fell out an RMA because umm to me that's not normal. Just wondering what you guys thought as well I normally use ATI/AMD cards. Thanks
New score :)
http://www.abload.de/thumb/bestfermiscore2mukc.jpg
It's hard to troubleshoot your issue with no PC specs and the case you are using, what PC case are you using? Something isn't right!Quote:
Originally Posted by Crazystang01
-Systemlord
Well atm I camping lol but motherboard evga 760 x58 cpu @4.0 case azza. I have a yate medium fan blowing right at the card and had fan speed set to 100 and still 95c in 2d. Sorry but typing on my droid.
Does it do any improvement what so ever, temp wise ?Quote:
Originally Posted by PiLsY
Doubt it. Maybe a tiny bit, but probably not.
That is absolutely not right. Your temps are way to high. Mine averages 42c Idling with fan on auto averaging 44% and 25.5c ambient room 30c ambient case. At stock speeds/voltage (700/1400/1848) with 99% load fan ramps up to 70% and hovers at 84c after 30 min with same ambient temps. From what I've seen reported, by other users/reviews this is average and what you should expect under normal circumstances. I would check your fan and intake ports for rpm and obstruction. My GPU fan runs 1683 RPM @ 44% AND 4703 RPM @ 100% as reported by Everest Ultimate OSD.Quote:
Originally Posted by Crazystang01
I hope this helps!
roki977 what voltage for that 950mhz???
Congrats for that OC. awsome.
1.21 under LN2 with no mods. Card really likes sub zero temp. It can probably go higher, but I did not have enough Ln2. Memory needs to be heated up during ses...problems with freezing memory
Thanks for the input. Good job!
Did you have any trouble with the OCP?
Mine kicks me off after 860mhz and 1.13v.
Zotac GTX 480 AMP! @ 900MHz -- Aircooling fan 86%
MSI Kombustor 100minutes -- Temps never go above 60c
http://img52.imageshack.us/img52/123...0900mhz.th.jpg
Amlett - same for me. Black / grey screens - even had a pink one once. Lower volts, artifacts, raise volts display cuts out.
VR-Zone has the ocp mod which is tempting me.
Are you living in igloo? ;)Quote:
Originally Posted by Darkstormz
For people who have GTX470 is the normal temperature reaches 107ºC playing any game? Before I used to overclock 800/1600/1900MHz (mV 1.037v), temperature was 107 º C playing, stability test (Kombustor) the same 107º C.
Now I degrades the clocks to 750/1500/1800MHz (1.013v) and the temperature remains at 107º C playing, same for stability test.
PS: That I've changed the thermal paste on the video card, I used the Arctic Cooling MX-3 for the GPU. Temp Idle 38ºC (gpu). Room Temp 30~32ºC.
My English is not the best, hope you understand. :shrug:
Thanks!