very nice systemviper,you werent kidding when you said you were goingQuote:
X3380
I got some new, well old ddr2 coming from a friend that is killer, I will be posting some results with my x3380 and ud3p over the next few days.
to posp some results with your X3380 in the next few days:up:simply amazing results
Quote:
Originally Posted by systemviper
very nice I have been waiting to see a screen shot:up:
Nice work SV!Quote:
Originally Posted by systemviper
Nice work.:up:Quote:
Originally Posted by the_real_7
I have a rev1.1, it hated 240b. I had to use 250a with the gskill pi's to reach 1200. Finally I gave up and went back to the rev1.0.
great viper almost close to my 5254 :up:Quote:
Originally Posted by systemviper
5254 :up: that is a nice score... :yepp:Quote:
Originally Posted by andressergio
I don't see you on hwbot? i do see Jor3llBR/Elano
@ 5255 mhz in the top spot,
mine is #2 for the silver....
that is my next goal....
going for over 5255 mhz
I almost had it but cpuz froze at 561fsb/ and it was dinner time....
i think i just need to adjust a bit,,, got it up to 549 and need to get
over 553 :rolleyes:
more to come. then i will go for the lower clock 2D stuff and start playing
with the ram,...
yeah that is my chip :up:Quote:
Originally Posted by systemviper
i just used my old loop for 5ghz and shoot a SPI and runs awesome, now i need to try higher on this USB3P but its runing soooo nice at 4500 with mem 1600 CL6 PL7 that i dont wanna touch anything lol
here's my run
http://img815.imageshack.us/img815/4206/sp11m12.jpg
Congrats again on your results, post a pic of your bench rig :up:
sweetness, i wish i had this UD3P and it took ddr3, i think it would rock lots more, :surf:
but i got a REX to try to... and
i am looking at your board too, the USB3P, it's not to expensive.......
just got to get the wife off my spending lockdown,...
http://img.techpowerup.org/100611/viperfest-2010.jpg
on another note, there is a possibility that x3380 ES was mine at one time.... very possbily :surf:
PS, very nice run, love the settings :yepp:
that's so nice a neat :up:Quote:
Originally Posted by systemviper
thx mate i dont have XP anymore as i converted my raid to dynamic, waiting some $$$ to get another ssdQuote:
Originally Posted by systemviper
Cheers :toast:
Sergio
lol, neat, yea i had to clean it up, i have a REX that i test next to the gig,Quote:
Originally Posted by andressergio
i run the REX on air to learn the bios....
but that i am getting close to the score i want, i had to
-0----- clear the area 0 ------
:up:
5263.04 mhz systemviper Intel Xeon X3380 @5263MHz SS
There is a new TOP score for the X3380 @ hwbot......
Wahoooooooo 5263.04 mhz :surf:
http://valid.canardpc.com/show_oc.php?id=1237051 :party:
http://img.techpowerup.org/100611/x3380-gold255.jpg
:rofl::rofl: congratssss see what a lit push can do :)Quote:
Originally Posted by systemviper
great great
Exactly, next i go after your 9sec 234ms superPi run :shrug:Quote:
Originally Posted by andressergio
naaa, but hopefully, i can get some more 2d scored with this chip,
I just scored some sweet DDR2 team, 1300 and
Dominator cas3 and team cas 3
to go along with my doninator 1250's
now if i only knew how to tweak ram :ROTF:
Quote:
Originally Posted by systemviper
Naw, you want to stay with the ddr2 board for most of the 2d benchs, clock for clock there faster. SPI 32m and maybe pifast are really the only ones that benefit from ddr3.
Mine hates 250A for some weird reason reason ,must be settings im going to try again tomorrow with 250A 200D AND 240B ... if i get somewhere good if not Im it was worth the try and fun ... but for me im not putting no more money into 775 ..and waiting for Intel sandty bridgeQuote:
I have a rev1.1, it hated 240b. I had to use 250a with the gskill pi's to reach 1200. Finally I gave up and went back to the rev1.0.
Congrats viper:clap:Quote:
Originally Posted by systemviper
and very nice bench pics:up:
that aint true CliffQuote:
Originally Posted by Hoss331
USB3P is as good as the UD3P and no reboot loops and awesome bandwith speciallly if you take the time to get the me she likes :up:
i can score at 4500 almost same 3D benches as on my UD3P at 4608
thanks for the tip! :up:Quote:
Originally Posted by Hoss331
woooooo, what to do now,... I alsp got a nice rex that has done over 620 fsb before from the guy i got it from, he got some records with it.Quote:
Originally Posted by andressergio
but i just love my gig UD3p, but must learn that asus bios...
UD3P rev 1.0 was great mobo but this one is an improved version just need a mature bios, im talking with giga support givin' them some data, i love it and great as you can be 2000+ 1T DDR3 stable and bench on more, i agree that on DDR2 EP45 UD3P 1.0 rocks so this one on DDR3 :)Quote:
Originally Posted by systemviper
asus aint for 775 QUADS just duals, GIGA = QUAD heaven :)
Cheers
Sergio
Quote:
Originally Posted by andressergio
Yea, i will never replace the golden UD3P, i got it as soon as they came out,
i saw that extra copper marketing and bit the hook, man o man i am glad i did... :up:
throw in a duallie and let her rip.just push push push the fsb:up:Quote:
Originally Posted by systemviper
i wish i had my rex still.:(
Yea, right now i got 2 REX's and the UD3P...Quote:
Originally Posted by radaja
Plus almost 20 - 775 chips.....
so lots of 2D benching to come.
then i switch over to 3D and my R3E, W3570 & CMGTX2
so lots of stuff to overvolt!
Quote:
Originally Posted by andressergio
I said 2D benchs, not 3D benchs. :up: As you know I have both boards and the only 2D bench that really benefits from the ddr3 is SPI 32m.