** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

thanks radaja , but i think sergio is going to kill me ... just finding out i gotta optimez setting on new ram to clear old setting doh doh

na,sergio dont mind.he's an awesome guy that will help in anyway he can:up:

Very nice warm up xD

Nice Chip, try 2200 Mhz or more on your Memory:shocked:

Quote:

Originally Posted by radaja

na,sergio dont mind.he's an awesome guy that will help in anyway he can:up:

thanks for ya words mate :up: Tony is so anxious on new mem that he forgot to do a CLRCMOS or at least a Load Optimized Defs so he clears old timmings lol

Cheers mate :toast:
Sergio

Quote:

Originally Posted by Solid Snake

Very nice warm up xD

Nice Chip, try 2200 Mhz or more on your Memory:shocked:

Hey SSnake nice to have you here :up: you wanna make the giga explode lol poor P45 :rofl: will try and post if can make it :) giga says 2200 so i will do it or with this Gskills or the Hypers :)

Thanks man for your help
Cheers :toast:
Sergio

Quote:

Originally Posted by Rebound

IN-fluence, Sergio and Radaja

Here is my new bios configuration after your indications:
:shakes:

Code:

******Motherboard Intelligent Tweaker (M.I.T.)****** Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ + 0.5 ] CPU Frequency 4.0GHz............................[ 460 x 8.5 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 460 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******Advanced Clock Control****** CPU Clock Drive.................................[ 800mv ] PCI Express Clock Drive.........................[ 900mv ] CPU Clock Skew..................................[ 0ps ] MCH Clock Skew..................................[ 0ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standart ] (G) MCH Frequency Latch.........................[ AUTO ] System Memory Multipler.........................[ 2.40B ] Memory Frequency 1066............................[ 1120 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 6 ] tRP.............................................[ 6 ] tRAS............................................[ 18 ] ******Advanced Timing Control****** tRRD............................................[ Auto ] tWTR............................................[ Auto ] tWR.............................................[ Auto ] tRFC............................................[ 80 ] tRTP............................................[ Auto ] Command Rate (cmd)..............................[ 2T ] ******Channel A Timing Settings****** Static tRead Value [ 10 ] ............... [ 10 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 10 ] ............... [ 10 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.2500 ]...................[ 1.4312 ] CPU Termination [ 1.20 ]...................[ 1,36 ] CPU PLL [ 1.50 ]................... [ 1.65 ] CPU Reference [ 0.760 ]...................[ 0,886 ] MCH Core [ 1.100 ]...................[ 1,54 ] MCH Reference [ 0.760 ]...................[ 0,901 ] ICH I/O [ 1.500 ]...................[ 1.57 ] ICH Core [ 1.100 ]...................[ 1.2 ] DRAM Voltage [ 1.800 ]...................[ 2.180 ]

Still not stable at 460x8,5

:(

which chip you running again?sorry havent paid attention

Quote:

Originally Posted by andressergio

Enjoy the best DDR2 on earth T !!! the fan looks awesome for them :up:

:yepp::yepp:
1300 was easy on my old set
i'm full blown into ddr3 now
radaja got me a set of the supertalent to play with:D
hypers like d9 now:rofl::rofl:

thats just what you think:rofl:they my precious now:ROTF:

ya i heard about those supertalent I gotta see Everest latency on those i see they do some tight ddr 3 timings be great also on a p55

Quote:

Originally Posted by radaja

thats just what you think:rofl:they my precious now:ROTF:

:rofl::rofl:
np bud :p:
dang your 980x is shipped:rofl:
and in the usa as we speak

Quote:

Originally Posted by the_real_7

ya i heard about those supertalent I gotta see Everest latency on those i see they do some tight ddr 3 timings be great also on a p55

i had crap hypers on evga p55 and was good ti'll they dies
even did 2k cas7;)
the death was peacefull cause i got refunded:rofl:
good hypers is somethin else;)

Quote:

Originally Posted by zsamz_

i had crap hypers on evga p55 and was good ti'll they dies
even did 2k cas7;)
the death was peacefull cause i got refunded:rofl:
good hypers is somethin else;)

aint 2200 CL8 Stalents good hypers ? the newer chips that GT's uses ?

Guys

I want to watercool my MCH is worth it ? i cant find a block for the USB3P other than the MCW30 :shrug:

any help will be apreciated :up:

Ek-nb-sb-5

Quote:

Originally Posted by andressergio

Guys

I want to watercool my MCH is worth it ? i cant find a block for the USB3P other than the MCW30 :shrug:

any help will be apreciated :up:

Hey Sergio, people had success with this block here:

http://www.performance-pcs.com/catal...B-5-Acetal.jpg EK-NB/SB 5 http://www.performance-pcs.com/catal...ducts_id=23638

Quote:

Originally Posted by andressergio

aint 2200 CL8 Stalents good hypers ? the newer chips that GT's uses ?

after seein radaja's results .....
i think they all the same chips;)
n people payin more for the 2200 and 2000 cas7
gtx2 is binned just to make sure no crap chips pass and for speed
i rather have a set that can do 1800+ cas6;) than 2200 cas7
if i can have 1600 cas5 24/7 i be in heaven
my best hypers do 1740z cas 6 and with 1.65v i was testing for more but my bios was corrupting
and i just bought an evga 3xsli just in case the rexIII goes belly up lol
when i get time i gonna test some more this time 1.7v

Quote:

Originally Posted by Jor3lBR

Hey Sergio, people had success with this block here:

http://www.performance-pcs.com/catal...B-5-Acetal.jpg EK-NB/SB 5 http://www.performance-pcs.com/catal...ducts_id=23638

thanks mate :up:

Radaja,

i am running on a q9550 C1 1.25 vid

Quote:

Originally Posted by zsamz_

after seein radaja's results .....
i think they all the same chips;)
n people payin more for the 2200 and 2000 cas7
gtx2 is binned just to make sure no crap chips pass and for speed
i rather have a set that can do 1800+ cas6;) than 2200 cas7
if i can have 1600 cas5 24/7 i be in heaven
my best hypers do 1740z cas 6 and with 1.65v i was testing for more but my bios was corrupting
and i just bought an evga 3xsli just in case the rexIII goes belly up lol
when i get time i gonna test some more this time 1.7v

ya i bought the 2200 CL8 lets hope i got a good one :up:

After me and Sergio been working all day to get somewhere with this ram being it's a little picky with this board, becuase it a version 1.1. But after some tinkering and putting the ram settings at stock and putting the Drive Strength Profile to oc - 1200 the board stabled out and did a 8k 8k in prime and actually started to work fine with the 240B divider .. timings are loose as hell at moment...... but will work on more tomorrow :) , any one else have a 1.1 v

http://i84.photobucket.com/albums/k7...killpc9600.png

PHP Code:

[code]******Motherboard Intelligent Tweaker (M.I.T.)****** Robust Graphics Booster.........................[ Standard ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ + 0.5 ] CPU Frequency 4.5GHz............................[ 500 x 8.5] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 500 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2.........................................[ Disabled ] ******Advanced Clock Control****** CPU Clock Drive.................................[ 900mv ] PCI Express Clock Drive.........................[ 900mv ] CPU Clock Skew..................................[ 0ps ] MCH Clock Skew..................................[ 50ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] Extreme Memory Profile (X.M.P)..................[ Profile1 ] (G) MCH Frequency Latch.........................[ 333 ] System Memory Multipler.........................[ 2.40B ] Memory Frequency 1066...........................[ 1200 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 15 ] ******Advanced Timing Control****** tRRD[4].........................................[ 4 ] tWTR[4].........................................[ 4 ] tWR[13].........................................[ 13 ] tRFC[68] .......................................[ 50 ] tRTP[4].........................................[ 4 ] Command Rate (cmd)[0]...........................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 9 ] ................[ 9 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ oc-1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 9 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ oc -1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.1875 ]...................[ 1.4250 ] CPU Termination [ 1.20 ]...................[ 1.300 ] CPU PLL [ 1.50 ]...................[ 1.570 ] CPU Reference [ 0.760 ]...................[ 0.886 ] MCH Core [ 1.100 ]...................[ 1.460 ] MCH Reference [ 0.760 ]...................[ 0.901 ] MCH/DRAM Refernce [ 0.900 ]...................[ Auto ] ICH I/O [ 1.500 ]...................[ 1.500 ] ICH Core [ 1.100 ]...................[ 1.200 ] DRAM Voltage [ 1.800 ]...................[ 2.200 ] DRAM Termination [ 0.900 ]...................[ Auto ] Channel A Ref [ 0.900 ]...................[ Auto ] Channel B Ref [ 0.900 ]...................[ Auto ] ******Advanced BIOS Features****** Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Disabled ][/code]

Quote:

Originally Posted by the_real_7

After me and Sergio been working all day to get somewhere with this ram being it's a little picky with this board, becuase it a version 1.1. But after some tinkering and putting the ram settings at stock and putting the Drive Strength Profile to oc - 1200 the board stabled out and did a 8k 8k in prime and actually started to work fine with the 240B divider .. timings are loose as hell at moment...... but will work on more tomorrow :) , any one else have a 1.1 v

http://i84.photobucket.com/albums/k7...killpc9600.png

PHP Code:

[code]******Motherboard Intelligent Tweaker (M.I.T.)****** Robust Graphics Booster.........................[ Standard ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ + 0.5 ] CPU Frequency 4.5GHz............................[ 500 x 8.5] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 500 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2.........................................[ Disabled ] ******Advanced Clock Control****** CPU Clock Drive.................................[ 900mv ] PCI Express Clock Drive.........................[ 900mv ] CPU Clock Skew..................................[ 0ps ] MCH Clock Skew..................................[ 50ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] Extreme Memory Profile (X.M.P)..................[ Profile1 ] (G) MCH Frequency Latch.........................[ 333 ] System Memory Multipler.........................[ 2.40B ] Memory Frequency 1066...........................[ 1200 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 15 ] ******Advanced Timing Control****** tRRD[4].........................................[ 4 ] tWTR[4].........................................[ 4 ] tWR[13].........................................[ 13 ] tRFC[68] .......................................[ 50 ] tRTP[4].........................................[ 4 ] Command Rate (cmd)[0]...........................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 9 ] ................[ 9 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ oc-1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 9 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ oc -1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.1875 ]...................[ 1.4250 ] CPU Termination [ 1.20 ]...................[ 1.300 ] CPU PLL [ 1.50 ]...................[ 1.570 ] CPU Reference [ 0.760 ]...................[ 0.886 ] MCH Core [ 1.100 ]...................[ 1.460 ] MCH Reference [ 0.760 ]...................[ 0.901 ] MCH/DRAM Refernce [ 0.900 ]...................[ Auto ] ICH I/O [ 1.500 ]...................[ 1.500 ] ICH Core [ 1.100 ]...................[ 1.200 ] DRAM Voltage [ 1.800 ]...................[ 2.200 ] DRAM Termination [ 0.900 ]...................[ Auto ] Channel A Ref [ 0.900 ]...................[ Auto ] Channel B Ref [ 0.900 ]...................[ Auto ] ******Advanced BIOS Features****** Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Disabled ][/code]

Great my friend rev 1.1 is picky on dividers maybe someone who has it can enlight us :up:

Wow, that's really close to the same bios settings I am using for the same clock. Only difference is you have a Q9650, and faster ram.

Dualies and Skews...what's recommended for 8x 500-525 FSB for an E8500? It seems critical for Quads, but what about Duals? Thanks!

Quote:

Originally Posted by bluestang

Dualies and Skews...what's recommended for 8x 500-525 FSB for an E8500? It seems critical for Quads, but what about Duals? Thanks!

same Blue give those i posted a try :up:

Quote:

Wow, that's really close to the same bios settings I am using for the same clock. Only difference is you have a Q9650, and faster ram.

Hey Dark-Energy so far im stable but it is believed there is a problem with with our 1.1 boards im not saying its not ... but im willing to go farther and say just a difference in settings due to the revisions , please send me your temp plate and a Everest if possible

Quote:

Originally Posted by andressergio

same Blue give those i posted a try :up:

Thanks Sergio, 900/900/0/50 I'll try this weekend as I'm hoping to get 8x 500-525 FSB stable on my E8500 with some nice DDR3 RAM speeds also. Will post screenies if, I mean when, I get there.:D

5215.58 mhz systemviper Intel Xeon X3380 @5215.6MHz

http://valid.canardpc.com/show_oc.php?id=1236548