yes thank you !
SUpA
Printable View
yes thank you !
SUpA
Quote:
Originally Posted by donmarkoni
What are you using to cool ur system to hit these specs
Got me a 3960X and R4E and a kit of G.Skill Ripjaws 2133mhz CL9 today.
Did a quick run on the table to check that everything is working, nothing big but the memory seems to OC ok.
Attachment 124194
Water cooling: Tt 500lph pump - EK Supreme on CPU - EK Supreme on GPU - 3x120mm fans at 2000rpm on HW Labs GT3 Xflow.Quote:
Originally Posted by Stigmata
Thanks, added to OP.
Quote:
Originally Posted by stasio
Rampage-IV-Extreme-ASUS-1201
http://www.mediafire.com/?vasugv1jdh2kiy5
- Minor fix of dual gpu VGA detection bug in bios's GPU/DIMM post screeen.
Throwing out my UD3, just a quick question. Should I go for the RIVE or the RIVF? The cooling will be my H100 and water later, so I figured I don't need the extra features on the RIVE. But then again I loved my R3E sooo much. Price difference in Norway is $100...
If you're using the h100, then go for the Extreme version as the the h100 won't work with the Formula.Quote:
Originally Posted by DuraN
http://www.overclock.net/t/1218449/h...e-incompatible
Otherwise both boards are great and it's a toss up which you you should get. The Formula does have only 4 dimm slots compared to 8 for the Extreme.
I just received my asus R IV E + G.Skill ripjaws 2133, and my I7 3930K C2 on the way, cant wait to play with this baby :D
I notice there is a 4-pin ATX 12V Power connector near the 8-pin ATX 12V Power connector, should i use it or leave it ?
That thread is for the S775 Formula though...Quote:
Originally Posted by MrTOOSHORT
If you're going to run 5Ghz and plus, use it. Otherwise it's not needed. I have mine plugged in for 4.7Ghz in hopes in gives more stable power to the cpu and since I have the cable anyways. :)Quote:
Originally Posted by koc
Oh sorry about that!:doh:Quote:
Originally Posted by DuraN
Well I hope whatever board you choose that your h100 works with it.
http://forum.corsair.com/v3/showthread.php?t=101113
sorry for double posting.
Seems to indicate the problem is with the brackets on the H100 and not the motherboard itself. My H100 has already been mounted fine on my UD3 so I reckon I'll be safe. But thanks for the info! Now, off to try to find some good deals on a RIVE or RIVF :)
Only if I'm lukey I can reach 5Ghz with noctua Nh-D14, otherwise 4.5~4.7 will be sweet for 24/7.Quote:
Originally Posted by MrTOOSHORT
I can not for the life of me get my X to 5GHz stable. I have tried so many things in this BIOS that the last two weeks is just a blur in my memory. Pretty bummed out...seems like everyone is getting 5Ghz. Full board under water too...I will keep at it, but it looks like I may have the weakest 3960 out there /cries.
I had three 3960x chips pass through my hands and only one does 5Ghz with decent voltage (about 1.44-1.46v). Another needed 1.52v and the other 1.55v...and neither were completely stable long term at those voltages. I would get a few random crashes here or there I think were heat related. Not all do 5Ghz easy peezy.Quote:
Originally Posted by MisterMagoo
Well I guess that makes me feel not as incapable as before hah. But still a little disappointed. 1.46 on the core is a little too hot for 24/7 yeah?Quote:
Originally Posted by mdzcpa
So, a noob question, which UEFI is the best/ more stable so far?
I'm using 1101.
I am on 1201, best for me so far.Quote:
Originally Posted by WCRF
1005 or 1201.Quote:
Originally Posted by WCRF
Using 1201 here, no issues thus far.
I have been running 1201 but no testing under cold as of yet.
seems fine for ambient temps, and pretty similar to 1005.
Quote:
Originally Posted by MisterMagoo
Quote:
Originally Posted by mdzcpa
Quote:
Originally Posted by Eldonko
Thank you very very much!!Quote:
Originally Posted by l0ud_sil3nc3
Very nice.Quote:
Originally Posted by Dumo