Printable View
Isn't this correct for a quad core but off 90 for a dual core, or does it not really matter that much?
http://lib.store.yahoo.net/lib/sidew...ters/gtz10.gif
Socket triangle would be in the lower right corner.
http://lib.store.yahoo.net/lib/sidew...ters/gtz11.jpg
On a dual core, the cores line up horizontal in the above picture.
http://www.arcticsilver.com/pdf/appi..._dual_wcap.pdf
Sidewinder Computers is showing Aug 14 as the date they receive theirs. I placed my order this morning for one. :D I just read about this block this morning on OCForums and went checking things out.
I plan to test on 2 different systems. My main rig is a U2-UFO case running a QX9650@4100 with a Fuzion v1 /with quad nozzle and MCW60 on a 8800GTS G92 with a PA120.3 and double fan heater core; pump is an Iwaki MD 20RTZ for the loop and the second system is an old Antec SX1200 case with an E6300@3500 with a Storm Rev 2 and PA160; pump is an Eheim 1250. I figure this should give some performance numbers for both high pressure pumps and med/low pressure pumps and also quad and dual core numbers too.
Hey mudd! So Andy you already got yours? Hmm, I guess mine will show up soon then :D
anxiously waiting your results mcoffey
thanks for the pics...
from our web site:Quote:
Originally Posted by Martinm210
"Mechanical design of the copper base plate is optimized for Intel® socket LGA 775 and 771. The assembly features a patent pending design characterized by a topographically mapped CPU contact area which results in a 75% and up to 300% improvement in TIM joint thermal resistance compared to the Apogee™ GT/GTX series. Other types of sockets such as AMD® socket F, AM2, and 940 as well as upcoming sockets similar in design to that of socket 775 may also benefit from the enhanced contact area."
we are NOT talking about cores gentlemen, we are talking about TIM. Please keep that in mind. The orientation of this waterblock is socket specific, not core specific.
Gabe:
I'm looking and missing where the mounts would be for socket771.
Are my old eyes that bad.
Thanks..
OOPS, forget it, I see them..
Had to see the one pic where the mounting screws weren't in place..
Nice looking WB and I have these 2 cpu's that are just crying out for this..
X5470's.. yea, I know, they don't exist..but they do.
Think a dual E8600 on each wafer, then 2 on the board..
3333/12mb/1333 120 w 10 multi E0 stepping..
BEASTS!:D
Different plate?Quote:
Originally Posted by mcoffey
Those aren't the mounts for 771 I see in your pic above with just the two red hoses attached?
Im dying to know if this will surpass the dtek v2. I know your trying hard to get this done, but do you have an estimate of when you will know the results?
martin or andy.
can one of you guys open it up and please take the dimentions of the middle base pins.
I want to see if this is neha compatable since neha has a larger die.
:T
http://www.swiftech.com/assets/image...pin-matrix.jpg
I need that middle square dimentions. From the looks of it, it might be too small. :X
estimating from the size of the base which is 2" x 2" looks to be around a .75" squareQuote:
Originally Posted by NaeKuh
thanks...Quote:
Originally Posted by evil-98
i was thinkn around that also.
Gabe did you guys estimate for neha?
Cuz it might be too small as it is.
You saw the size comparisions of it right?
As you can see from a picture from JCornel:
http://en.expreview.com/img/2008/02/26/Neh_1_1.jpg
its much bigger and its not square.
And it looks bigger in real life. Trust me, when you hold the chip, the first thing you say is WOW this puppys BIG.
I like shiny metal look. Like the copper top from the GTX. by the way, could I replace GTZ top with GTX top?
i hope your talking about the copper top.Quote:
Originally Posted by Eternalightwith
If you meant the alu top, your gonna get lynched cuz gabe went though hell on the original GTX from all of us.
yes ... you even quoted it.;)
a copper top with a gunmetal nickel plating would look slick!! but that's 2nd for me I can't wait for results.
ya i am finally ready to buy my watercooling system that i designed months ago and now the gtz comes out and there hasn't been any testing on the fuzion gfx2 (to my knowledge) so it looks like ill have to wait :P. looks like a really nice block tho.Quote:
Originally Posted by silverphoenix
ack sorry im having a hell of a day at work.Quote:
Originally Posted by Eternalightwith
busy going in and out.
Still gonna wait for messurements. I think i may have to skip this block if its not neha friendly.
Even if the GTX top fit im not shure if it would hold the nozzle thingy in place properly...