The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

11-07-2005, 03:58 PM
tatts

did you mean a 146 cabye0540? or is there a 144 cabye0540 out there?
11-07-2005, 04:20 PM
gbomb944

Quote:

Originally Posted by gundamit

When you think about how much a really good water cooling rig will cost you, then consider you can get into phase change for about $500-600 buying used, its easy to justify the expense. I told you I thought you were less than 2 months away from stepping up to phase, I might have been a little too conservative on my guess. ;) If you want to keep your cheap image think about a mousepot. :p:

Water is pretty close to being more trouble than it's worth. It's good for 100-200 mhz over air in some cases but not always. It Looks nice with uv and all which is why so many case modders use it and it can be more silent sometimes.
At least with phase you can count on 400-500 mhz. That pays for itself pretty quick.
11-07-2005, 04:23 PM
gbomb944

Weren't there some a few pages back? Oh well. Guess I should've taken notes, it looks like they are only 146's. I still need one and so does he.
11-07-2005, 09:31 PM
NYCTeeN82

Have the CABYE 0540 been seen in 146 so far, or 148? or both?
11-07-2005, 11:01 PM
Pt1t

Quote:

Originally Posted by Txaime

Somebody have a 144 cabne 0540 apmw?

i have 2 APMW and 1 FPBW.

144 CABNE 0540 APMW --> 1.71v
http://users.skynet.be/pt1t/144/144_3004_1.71v_temp.PNG

146 CABYE 0540 FPBW --> 1.4v
http://users.skynet.be/pt1t/146/2005...1-CPUGraph.PNG
11-08-2005, 02:33 AM
MeTsU

I'm trying to source god stepping 146's in the U.K. I'd like to take some back to South Africa for some friends, as S.A doesn't have anyone bringing them in.

Any guys here from the U.K know where I can find some. I've got a couple of places in mind, but I'm waiting for them to get stock, so they can give tell me the stepping.
11-08-2005, 03:09 AM
matt1

No-one in the UK as them in stock at the moment, only 144s seem to be coming in. But, there should be some coming in this week so I'm told.
11-08-2005, 03:13 AM
furyfax

What steppings are you guys receiving in the UK ? Thinking of getting a friend of mine to order from komplett.co.uk, but would like to know which stepping i most likely will receive!
11-08-2005, 03:23 AM
tatts

i got a 146 cabye 0540fpbw which does 2.9ghz on stock V & 3ghz 1.45V & a 148 cabye 0540fpbw which i havnt tested yet and both came from OCUK www.overclockers.co.uk
11-08-2005, 03:23 AM
MeTsU

Quote:

Originally Posted by furyfax

What steppings are you guys receiving in the UK ? Thinking of getting a friend of mine to order from komplett.co.uk, but would like to know which stepping i most likely will receive!

I just got off the phone from someone at Komplett.co.uk. All he could tell me was that they have a "mixed batch". I was hoping to get a litte more than that out of him.
11-08-2005, 03:24 AM
MeTsU

Quote:

Originally Posted by tatts

i got a 146 cabye 0540fpbw which does 2.9ghz on stock V & 3ghz 1.45V & a 148 cabye 0540fpbw which i havnt tested yet and both came from OCUK www.overclockers.co.uk

When did you purchase them? I'm looking to buy 5 to take back to South Africa.

EDIT: I was on the phone to them too. I was told yesterday that they'd be receiving a load today, but I just spoke to a guy who said that he had been told otherwise. He couldn't even tell me when AMD planned to send them stock. :(
11-08-2005, 03:26 AM
tatts

i got my 146 on the 2nd november & the 148 came today
11-08-2005, 04:00 AM
gbomb944

Thats sweet Pt1t. Weird how one chip of more or less the same design can perform so much differently than another.

The 0530 cabne's were great and the 0540's are so-so. The o536 cabye's are ok but the o540's rock. I guess just a lucky batch of wafers at whatever fab.
11-08-2005, 05:55 AM
Smoke0

Blank to all, I am trying opteron a 144-146 with promising acronym or tested, someone could help me indicating to me where in pm... thanks to all!

Mark :D
11-08-2005, 06:08 AM
TEDY

overclockers.uk is too expensive. and no :banana::banana::banana::banana:ing email ?!!!!
11-08-2005, 06:10 AM
Zac89

Quote:

Originally Posted by TEDY

overclockers.uk is too expensive. and no :banana::banana::banana::banana:ing email ?!!!!

yeah, i can't find an e-mail......
Anyne knows what stepping they have?
11-08-2005, 06:16 AM
TEDY

nope :

I lost all faith and will in finding good stepping.
11-08-2005, 06:24 AM
Zac89

:( :( :(
Me too..... I asked too many shops and i found only lots and lots of CABGE!!! :(
11-08-2005, 06:27 AM
TEDY

tell me about damn CABGE's.....all people bought them...many people 2-3 not leaving others a chance.
11-08-2005, 06:49 AM
tatts

Quote:

Originally Posted by TEDY

overclockers.uk is too expensive. and no :banana::banana::banana::banana:ing email ?!!!!

i got my 146 from them (cabye 0540fpbw) and cost me £101 before prices went up due to the demand.
sadly i only bought one 146 & one 148 (both same week & stepping) if i got more id have more to pass on to people like you
11-08-2005, 06:53 AM
TEDY

tatts: why you need 2 ? ;)
11-08-2005, 06:57 AM
tatts

i got 2 to make sure i got a good stepping, if i got 1 i would of ended up with a cabge lol
i will be selling one soon though, possibly the 146 ;)
11-08-2005, 07:35 AM
Txaime

Quote:

Originally Posted by Pt1t

i have 2 APMW and 1 FPBW.

144 CABNE 0540 APMW --> 1.71v
http://users.skynet.be/pt1t/144/144_3004_1.71v_temp.PNG

146 CABYE 0540 FPBW --> 1.4v
http://users.skynet.be/pt1t/146/2005...1-CPUGraph.PNG

Very nice oc. What is the ambient temp? and theese are cooling by air?
11-08-2005, 08:33 AM
Pt1t

Quote:

Originally Posted by Txaime

Very nice oc. What is the ambient temp? and theese are cooling by air?

By watercooling , +- 22° ambiant temp.
11-08-2005, 08:40 AM
rookiekiller

http://img198.imageshack.us/my.php?i...001mark2rv.jpg

heres my new toy cabye 0540 FPBW =o)
11-08-2005, 09:01 AM
tatts

Quote:

Originally Posted by rookiekiller

http://img198.imageshack.us/my.php?i...001mark2rv.jpg

heres my new toy cabye 0540 FPBW =o)

marvalous mate, same stepping as mine & also does 2.9ghz on stock volts :banana:
1.45V should see 3ghz ;)
11-08-2005, 09:08 AM
demenion

Where are these CABYE 0540's coming from? :P
11-08-2005, 09:11 AM
tatts

Quote:

Originally Posted by demenion

Where are these CABYE 0540's coming from? :P

a magical place and im lucky enough to have 2 :woot: :banana: :banana: :banana:
11-08-2005, 09:26 AM
tatts

the 148 is looking to be as good as the 146 so far :banana:
2.8ghz stock volts .. idle 33c load 38c :banana:

http://img363.imageshack.us/img363/130/11x2557gw.th.jpg
11-08-2005, 09:29 AM
xenolith

Quote:

Originally Posted by demenion

Where are these CABYE 0540's coming from? :P

If you get a retail 146 from Monarch while they're still in stock right now, it's a very good chance of being a 0540. Tankguys is $30 cheaper, and I have one on the way from them right now, but you'll have to get in line.

EDIT: Oops! just checked Monarch, they're OOS. Try ZZF.
11-08-2005, 09:54 AM
demenion

Quote:

Originally Posted by xenolith

If you get a retail 146 from Monarch while they're still in stock right now, it's a very good chance of being a 0540. Tankguys is $30 cheaper, and I have one on the way from them right now, but you'll have to get in line.

EDIT: Oops! just checked Monarch, they're OOS. Try ZZF.

its really tempting to order one, but I don't know.

I got lucky and nearly broke even on my last 146 CABGE from Monarch.

I just got a new 165 and my results aren't that bad..
11-08-2005, 10:12 AM
TEDY

ZZF is expensive.
11-08-2005, 10:17 AM
tatts

Quote:

Originally Posted by TEDY

ZZF is expensive.

not if its a cabye 0540, i seen one auctioned for £245 the other day ;)
11-08-2005, 10:35 AM
TEDY

tatts: ridicoulus....you know Ł245 you get opt165 and more.

ZZF can't claim me they have caybe 0540 :)
11-08-2005, 10:55 AM
flesheatinvirus

Keep an eye on Compumusic also as they list the stepping and week of every shipment coming in,i picked up a nice CABYE week 28 148 from them last week.
11-08-2005, 11:00 AM
tatts

now both opterons are running 3ghz and temps are very similar for both (1C more under load for the 148) :banana: :banana: :banana:

opteron 148 CABYE 0540FPBW 1.55V

http://valid.x86-secret.com/show_oc?id=48832

http://img346.imageshack.us/img346/8...x2731ce.th.jpg

opteron 146 CABYE 0540FPBW 1.45V

http://valid.x86-secret.com/show_oc?id=47494

http://img108.imageshack.us/img108/5...x3004dg.th.jpg
11-08-2005, 11:06 AM
Pt1t

Quote:

Originally Posted by rookiekiller

http://img198.imageshack.us/my.php?i...001mark2rv.jpg

heres my new toy cabye 0540 FPBW =o)

with mine , occt passed @ 2ghz 0.97v :banana:
11-08-2005, 11:08 AM
silky

I just got my 144 from Dream Hardware.

CAB2E 0540FPMW

Anyone have any results on this batch?
11-08-2005, 11:11 AM
TEDY

Quote:

Originally Posted by flesheatinvirus

Keep an eye on Compumusic also as they list the stepping and week of every shipment coming in,i picked up a nice CABYE week 28 148 from them last week.

http://www.compumusic.com/ ?
11-08-2005, 11:17 AM
tatts

Quote:

Originally Posted by silky

I just got my 144 from Dream Hardware.

CAB2E 0540FPMW

Anyone have any results on this batch?

my cab2e topped out @ 2.7ghz with 1.7V
11-08-2005, 11:21 AM
silky

Well it doesn't look like I got a wonder chip but it's sure better than my Sempron 3100.
11-08-2005, 11:26 AM
tatts

sure is, even 2.6ghz is fx55 ;)
11-08-2005, 11:31 AM
furyfax

It is a little expensive with 233$ for a 146. Here in Norway the 146's cost about 180$, not that they have them in stock. :(
I did order a 146 the 3.nov then it sayd 10 days delivery, now it says uknown delivery,well well..
11-08-2005, 12:03 PM
flesheatinvirus

Tedy

Quote:

Originally Posted by TEDY

http://www.compumusic.com/ ?

Thats the place,type in amd opteron in the search area.
11-08-2005, 12:10 PM
TEDY

too expensive.
11-08-2005, 12:12 PM
tatts

Quote:

Originally Posted by TEDY

too expensive.

and thats why you dont own one :stick:
11-08-2005, 12:15 PM
TEDY

tatts : i live in eurrope..

233$ + shiping would be 250$...i'm not that nuts

i do have venice in my sig. it does 317*9....just looking my goal 3ghz...

seems i will never achieve...all sold out :(
11-08-2005, 12:21 PM
Monge

tatts: Very nice chips :)
What's your cooling?

Monge :toast:
11-08-2005, 12:21 PM
fagin

Quote:

Originally Posted by silky

Originally Posted by silky
I just got my 144 from Dream Hardware.

CAB2E 0540FPMW

Anyone have any results on this batch?

Quote:

Originally Posted by tatts

my cab2e topped out @ 2.7ghz with 1.7V

My 144 CAB2E 0540FPMW is currently at 2.9GHZ with 1.56v :) The biggest problem was tuning in the htt that high - oh and the cold bug, meaning that 2.9 was achieved wit the stock HSF (and the thermal pad!). Prime temperatures are 55C. I suppose I'd better slap a better cooler on it.
11-08-2005, 12:24 PM
silky

:banana::banana::banana:in, looks like you got a good one.
11-08-2005, 12:30 PM
TEDY

:banana::banana::banana:in : stock !!!!!

throw it away.......AS5 ASAP !!!!!!!!!!!!!

and some dunno XP90 or something.
11-08-2005, 12:48 PM
largon

Quote:

Originally Posted by Pt1t

Quote:

Originally Posted by Txaime

Very nice oc. What is the ambient temp? and theese are cooling by air?
http://users.skynet.be/pt1t/146/2005...1-CPUGraph.PNG

By watercooling , +- 22° ambiant temp.

22ºC ambient and the proc is at 23ºC idle? Now that's one truly xtreme watercooling. :eek:

Chilled?
CnQ?

If not, your sensors must be atleast few degrees off. :( Impressive nevertheless!
11-08-2005, 12:56 PM
Pt1t

Quote:

Originally Posted by largon

22ºC ambient and the proc is at 23ºC idle? Now that's one truly xtreme watercooling. :eek:

Chilled?
CnQ?

If not, your sensors must be atleast few degrees off. :( Impressive nevertheless!

not chilled and CnQ off and my sensors are ok, just 1.39v and good watercooling.
11-08-2005, 01:09 PM
largon

Core 1ºC over ambient... :hm:

What block do you use? Rad? Pump? How big reservoir?
11-08-2005, 01:23 PM
xenolith

I don't trust any BIOS/proggy diode reader. I like to monitor temps with thermistors.

CM Cool Drive 4
11-08-2005, 01:25 PM
Pt1t

Quote:

Originally Posted by largon

Core 1ºC over ambient... :hm:

What block do you use? Rad? Pump? How big reservoir?

SL2 , 1048 , BIP3 , A 45cl reservoir.

But it s this cpu ! with cabne i have 6° more @same vcore.
11-08-2005, 01:38 PM
tatts

Quote:

Originally Posted by Monge

tatts: Very nice chips :)
What's your cooling?

Monge :toast:

thanks :D only using a arctic freezer64 until the WC is set up tomorrow :banana:
that 148 wont be staying long though, the 146 is stable doing 2.9ghz on stock volts & 1.45V for 3ghz were the 148 needs 1.5V for 2.9ghz stable and currently priming 3ghz 1.55V
11-08-2005, 02:07 PM
Monge

Quote:

Originally Posted by tatts

thanks :D only using a arctic freezer64 until the WC is set up tomorrow :banana:
that 148 wont be staying long though, the 146 is stable doing 2.9ghz on stock volts & 1.45V for 3ghz were the 148 needs 1.5V for 2.9ghz stable and currently priming 3ghz 1.55V

Thanks for the info :)

Was the CPU you recieved similar to picture on oc's homepage?

And what's the difference between AMD Opteron UP 146 "San Diego" and Opteron 146 "Venus"?
11-08-2005, 02:11 PM
TEDY

monge: think one is for 940 ?
11-08-2005, 02:13 PM
tatts

mine came in the cardboard retail box if thats what you mean?
as for venus & san diego, i think one is a skt939 & the other is skt940, always make sure it says 939 before buying coz if it doesnt it will prob be a skt940
11-08-2005, 02:19 PM
Monge

Tedy: But I've seen Opteron 146 "Venus" for soc. 939.
eg. here:
http://www.ebug-europe.com/bug/defau...CK939110022944

tatts: Yes, that's what I meant. The cardboard retail box came with Box cooler?

On AMD.com I only find this 146 soc.939:
http://www.amdcompare.com/us%2Den/op...pn=OSA146BNBOX
11-08-2005, 02:34 PM
tatts

yep, mine came in the cardboard box with cooler etc.
im letting one of mine go & trying a 165 or 170 next :D
11-08-2005, 02:37 PM
Monge

Quote:

Originally Posted by tatts

yep, mine came in the cardboard box with cooler etc.
im letting one of mine go & trying a 165 or 170 next :D

You can get a good price for it, I guess.
Good luck :)
11-08-2005, 02:52 PM
fagin

Quote:

Originally Posted by TEDY

:banana::banana::banana:in : stock !!!!!

throw it away.......AS5 ASAP !!!!!!!!!!!!!

and some dunno XP90 or something.

:lol:

This was purchased to go under my mach II - but even with +ive temperatures via 1.8vcore and folding in the background, htt was still severly limited. I've got an all copper heatsink and 78cfm fan sitting here as well as AS%, I'll get them under that. I've got water cooling here as well. I'm just a masocist who likes to find out how things go with the stock stuff before moving on.
11-08-2005, 02:56 PM
tatts

1.8V with stock heatsink, it would of died by now :stick:
11-08-2005, 02:57 PM
Gripper

Quote:

Originally Posted by tatts

mine came in the cardboard retail box if thats what you mean?
as for venus & san diego, i think one is a skt939 & the other is skt940, always make sure it says 939 before buying coz if it doesnt it will prob be a skt940

Hi tatts,

I have exactly the same stepping 146 as you, but cannot even get 2800MHz stable without silly amounts of vcore! :(

What BIOS are you running and anychance of an A64 Tweaker screenshot?
11-08-2005, 03:04 PM
tatts

i take it youre using a dfi? im using the 704-2bta (use tmods cd from dfistreet to update)
as for a64 tweaker, i havnt touched it yet, left all ram on default for now until i find the max stable clock out of both of them
are you using a ram divider? maybe thats your problem?
11-08-2005, 03:20 PM
NWEng

Quote:

Originally Posted by tatts

are you using a ram divider? maybe thats your problem?

Or not using one. Memory bandwidth shouldn't be a huge consideration with the on-chip memory controller. Using a divider to keep it around DDR400 with good timings but a high clockspeed (FSB) should produce good results. I'm using the 2/3 divider to keep my memory is around 204 with and FSB of 310, but my timings are 2-5-2-2 plus tweaks and it's running better than it ever has and I don't think I've topped it out yet.
11-08-2005, 03:22 PM
tatts

thats what i said (meant) nweng lol
11-08-2005, 03:23 PM
fagin

Quote:

Originally Posted by tatts

1.8V with stock heatsink, it would of died by now :stick:

Read again! 1.8v was under Prometeia Mach II, to try and trick the cold bug.

At -15C Max htt was 265
At 0C Max htt was 290
At 10C Max htt was 320

Under HSF Max htt is 348.
11-08-2005, 03:24 PM
SpookyMoomin

1 Attachment(s)

Looks like my 144 Cab2e 0540fpmw compares fairly well, its been running for a week or so, had a few problems with some very twitchy RAM, lacking a bit of bandwidth as a result, running a cpu/14 divider :rolleyes:

Well pleased overall though, my first build with an athlon since my thunderbird 1Ghz :D
11-08-2005, 03:28 PM
Gripper

Quote:

Originally Posted by tatts

i take it youre using a dfi? im using the 704-2bta (use tmods cd from dfistreet to update)
as for a64 tweaker, i havnt touched it yet, left all ram on default for now until i find the max stable clock out of both of them
are you using a ram divider? maybe thats your problem?

I have tried that BIOS and a few others ~ Using G.Skill LA 1:1 or divider (133/166) seems to make no difference, also w/c with temps not going above 45c under load!

I also have a CABNE 0528 GPMW which requires too many volts as well.............! :(
11-08-2005, 03:35 PM
tatts

theres something your missing then if the cabne 0528 needs alot of volts aswell, have you lowered the ldt multiplier? or tried slackening your ram timings?
11-08-2005, 03:36 PM
tatts

Quote:

Originally Posted by :banana::banana::banana:in

Read again! 1.8v was under Prometeia Mach II, to try and trick the cold bug.

At -15C Max htt was 265
At 0C Max htt was 290
At 10C Max htt was 320

Under HSF Max htt is 348.

i get it now, the 1st post doesnt make much sense, even with a mach II 1.8V is abit high, you must be brave lol
11-08-2005, 03:42 PM
fagin

Quote:

Originally Posted by tatts

i get it now, the 1st post doesnt make much sense, even with a mach II 1.8V is abit high, you must be brave lol

1.8v is high, but at least 144's are cheap! I was desperate not to have to use a HSF.
11-08-2005, 03:44 PM
Aphex_Tom_9

Quote:

Originally Posted by :banana::banana::banana:in

Read again! 1.8v was under Prometeia Mach II, to try and trick the cold bug.

At -15C Max htt was 265
At 0C Max htt was 290
At 10C Max htt was 320

Under HSF Max htt is 348.

ooh, interesting, my 148 CABYE under Mach 2 seems to lack a cold bug...
11-08-2005, 03:44 PM
tatts

i like your spirit :D
11-08-2005, 04:00 PM
Gripper

Quote:

Originally Posted by tatts

theres something your missing then if the cabne 0528 needs alot of volts aswell, have you lowered the ldt multiplier? or tried slackening your ram timings?

Yep, all of those ~ LDTx3, trying the 6.23-1 BIOS. RAM is Memtest stable tests 5 & 8 250MHz 1:1 (2.5-3-6-3 1T) vcore 1.52 actual 1.53 on multimeter!

Just tried to boot on the above settings at 10x250 and get that great BSOD IRQL_NOT_LESS_OR_EQUAL :confused:

Edit, disabled bank int. and will now load into windows but bombs out of SuperPi instantly........I have also been using this guide TCCD DDR600+ DFI nF4 Ultra/SLI guide for RAM tuning.
11-08-2005, 04:00 PM
fagin

Quote:

Originally Posted by Aphex_Tom_9

ooh, interesting, my 148 CABYE under Mach 2 seems to lack a cold bug...

I wish :( htt literally scaled opposite to temperature. When I first set it up, I thought I had the worst opteron in history as I couldn't get above 2.4 at -20C! 70C warmer gives me 9X324 and more.
11-08-2005, 04:26 PM
Naasar

just got my opty 146 today. stepping as follows:

OSA146DAA5BN
CABYE 0540FPBW
1341649J50193

i also my Asrock Dual sata2 version 1.04

what do u guys think of the posibilities of this stepping? :stick:
11-08-2005, 04:37 PM
HermS

Quote:

Originally Posted by :banana::banana::banana:in

Read again! 1.8v was under Prometeia Mach II, to try and trick the cold bug.

At -15C Max htt was 265
At 0C Max htt was 290
At 10C Max htt was 320

Under HSF Max htt is 348.

I've always been under the impression that the coldbug doesn't kick in until substantially lower temps are achieved (-50c), by that I mean far beyond the kind of temps achievable with a single stage. This rings true with my set up too, even at -26c my HTT is unaffected, 320+ isn't a problem.
11-08-2005, 04:42 PM
tatts

Quote:

Originally Posted by Naasar

just got my opty 146 today. stepping as follows:

OSA146DAA5BN
CABYE 0540FPBW
1341649J50193

what do u guys think of the posibilities of this stepping? :stick:

nearly every 146 so far with that stepping have hit 3ghz with pritty low volts, mine is the same stepping and does 3ghz on 1.45V and some need upto 1.55V, just hope your board clocks well :D
11-08-2005, 04:49 PM
ZoKi

I've been able to push this chip now to 2.8 on my CABGE 146 opteron with the IHS off. Will try to push more.
11-08-2005, 07:07 PM
NYCTeeN82

Are the CABYE 0540 coming in the cardboard box or the new box? Anyone know?
11-08-2005, 07:50 PM
xenolith

All the retail opty's come in the cardboard box.
11-08-2005, 08:16 PM
ozzimark

Quote:

Originally Posted by NYCTeeN82

Are the CABYE 0540 coming in the cardboard box or the new box? Anyone know?

the cardboard box.. is the new box ;)
11-08-2005, 08:27 PM
gundamit

Quote:

Originally Posted by Naasar

just got my opty 146 today. stepping as follows:

OSA146DAA5BN
CABYE 0540FPBW
1341649J50193

i also my Asrock Dual sata2 version 1.04

what do u guys think of the posibilities of this stepping? :stick:

Does the 1.04 version of the mobo wildly different from previous ones? If no, flash to the first OCworkbench beta bios and do the vcore mod. Once that's done you should be able to take it pretty high with the first limitation coming up being the cooling you have. On water you should be able to crack 3ghz. After cooling issues are resolved, YMMV based on what the board will allow. Good luck and post your initial results ASAP.
11-08-2005, 09:49 PM
eva2000

Quote:

Originally Posted by Razor_cut

Hey!

When do you folks think the 146 CAB2E will be available? It it even will be available?

Cheers!

yeah starting to see 146 CAB2E FPMWs in Australia too
11-08-2005, 10:03 PM
xenolith

Quote:

Originally Posted by eva2000

yeah starting to see 146 CAB2E FPMWs in Australia too

What week?
11-08-2005, 11:06 PM
ArcTan

Quote:

Originally Posted by xenolith

What week?

week 40 I believe
11-09-2005, 01:32 AM
MeTsU

Quote:

Originally Posted by eva2000

yeah starting to see 146 CAB2E FPMWs in Australia too

Anybody have any results on these Opty's? I missed the boat with the CABNE, CABYE most likely. There's a place or two in the U.K that are supposed to be getting stock today, so there's a chance they'll be the CAB2E's. I'm hoping for the CABYE's, but I doubt it.

Anyone with 146 CAB2E results? :)
11-09-2005, 01:33 AM
Mats

My 146 will arrive on friday, code is CABYE 0540 FPMW. *PMW or *PAW are usually good AFAIK.
So what do you think, is it a winner?
11-09-2005, 01:39 AM
TEDY

mats : where from ?
11-09-2005, 01:40 AM
Wiker

I have i Choice to buy eiter a CABYE 0536 or a CAYE 0540 for the same price, wich one is the best?
11-09-2005, 01:40 AM
MeTsU

Quote:

Originally Posted by Mats

My 146 will arrive on friday, code is CABYE 0540 FPMW. *PMW or *PAW are usually good AFAIK.
So what do you think, is it a winner?

Yea, that's a good stepping - DFX's Opteron 146 CABYE 0540 FPMW @ 3.5GHz

Do you mind if I ask where you got yours from?
11-09-2005, 01:46 AM
MeTsU

Quote:

Originally Posted by Wiker

I have i Choice to buy eiter a CABYE 0536 or a CAYE 0540 for the same price, wich one is the best?

Is that 144 or 146?
11-09-2005, 01:47 AM
Wiker

ITs a 144
11-09-2005, 01:51 AM
MeTsU

Quote:

Originally Posted by Wiker

I have i Choice to buy eiter a CABYE 0536 or a CAYE 0540 for the same price, wich one is the best?

Well, Eva2000 got his 144 CABYE 0536 up against a FX-57 - check out Super Pi: Opteron 144 CABYE 0536 GPMW vs FX-57 CABCE 0516 WPMW.
11-09-2005, 01:58 AM
Wiker

Ok I hioe to reach about 2.9-3 ghz with a thermaltake bigwater. Wich one seems to have the best possibilities of this`?
11-09-2005, 01:58 AM
TEDY

0536 i think.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 10:38 PM.

XtremeSystems