Unleash the Gladiator (RV670): 862MHz GPU Clock Limit Fixed

Quote:

---

Originally Posted by Supreme(CDW)

Lol extera you have upload my hex bios :(
Now everyvody hits the 911/1331

of is this a other one?

Okey have fun all!!

;)

---

CDW / Extera - How is this bios differnet from those posted by Stilt or Denny?

Ton

I don't know of its faster but i did that hex mod
on a 875/1200 bios downloaded somewhere

Different people are running it now !
like Extera's cards are running fine :)
And hits the 25000k in 3dmark06 with a Yorkie

Quote:

---

Originally Posted by Supreme(CDW)

I don't know of its faster but i did that hex mod
on a 875/1200 bios downloaded somewhere

Different people are running it now !
like Extera's cards are running fine :)
And hits the 25000k in 3dmark06 with a Yorkie

---

Ok.. i am going to give mine a flash w/ the bios. I'm using Denny's and got 890/1300.

Hey.. how are you scoring w/ your QX6850 and 3870's? That is the same setup I have over here.

Ton

No need for hex mod!
You can edit the bios clockspeeds with this:
http://img339.imageshack.us/img339/8...tum3870cj0.jpg

Download

WOhoo!!! thanks for the link :D

Ton

Ive never been able to get that 3870 BIOS editor to generate a valid BIOS....atiflash and winflash both report invalid VBIOS :shrug:

Hmm..bios editor worked fine for me. I flashed both my cards to 890/1290 just fine. The problem was teh card performed well in single.. but in CF I had to drop the speed. Trying to find the max speed right now.

When you guys OC your CF.. how do you adjust the speeds on both cards? Is there one place where you can adjust both cards at the same time, or do you have to adjust each card separately, like the fan rates?

Ton

you have to adjust clocks for each card (CCC or Rivatuner)


regards

Quote:

---

Originally Posted by mascaras

you have to adjust clocks for each card (CCC or Rivatuner)


regards

---

Macaras:

Thanks for the answer. What a PITA!! Just curious.. in RT I see 4 adapters. Do I have to adjust all 4 to teh same Clock Speeds?

Ton

No , just the first Two adapters (Plug& Play Monitor and the Predefined Monitor)


btw:

28.3K done by Shamino


http://resources.vr-zone.com/Shamino/283.jpg

Quote:

---

Originally Posted by mascaras

you have to adjust clocks for each card (CCC or Rivatuner)


regards

---

how do you adjust the cards seperatly in CCC?

you can choose in Overdrive the card you want to Overclock


http://aycu28.webshots.com/image/354...9778828_rs.jpg


Card1 >> HD3870 SyncMaster

Card 2 >> HD3870



regards

Mascaras,

Thanks for the screenies :) I will give it a shot tonight. I think i was benching asymetric last night. that would explain some of the "Weirdness" I was encountering :)

Once I get the max CF Speeds in place, I can try to do the vMods next :D

Ton

another thing , To crossfire work properly the Catalyst A.I must be in STANDARD Mode and CF Enable in CCC



http://img505.imageshack.us/img505/7806/crossju6.jpg

http://img517.imageshack.us/img517/578/standaraimb5.jpg


>> http://www.xtremesystems.org/forums/...d.php?t=167695


:up:

Thanks mascaras...... after I got home from work I was thinking about it and tried to the drop down....... :D

anyone already tryed Auto-Tune in CCC ??

my card was already at 950Mhz then i decided stop going any further


940Mhz

http://aycu16.webshots.com/image/395...1213577_rs.jpg






950Mhz

http://aycu27.webshots.com/image/399...7255943_rs.jpg



i think Auto-Tune not working OK and its very dangerous , mainly for memory ..........



regards

Does AI have to be in standard mode or just enabled?

standard or disabled.

Crossfire doesn't work well with advanced AI enabled? I tried two HD 3850s under Vista x64 @ 730|1000 with Overdrive and they did 16.5K.

http://service.futuremark.com/compare?3dm06=4420651

The "unkown mobo" is a BX2 :p: Guess I will go back and try standard.

Quote:

---

Originally Posted by Blacklash

Crossfire doesn't work well with advanced AI enabled? I tried two HD 3850s under Vista x64 @ 730|1000 with Overdrive and they did 16.5K.

http://service.futuremark.com/compare?3dm06=4420651

The "unkown mobo" is a BX2 :p: Guess I will go back and try standard.

---

They recommend that AI is either disabled or in standard mode.
http://img505.imageshack.us/img505/7806/crossju6.jpg
(Sorry for stealing your picture mascaras)

I ran it again and it was higher

http://service.futuremark.com/compare?3dm06=4422084

16761 vs 16557 for the first.

Btw, do overclocking in Crossfire with Vista 64bit work well now?

Thanks guys, that cleared things up.

@Blacklash, was that run in standard mode or disabled for AI. Disabling the AI should give you the highest score.

Quote:

---

Originally Posted by The Stilt

Same goes for HD3850 too...

HD3850 256MB (with board 102-B34003)

HD3850 PLL VCO Fixed Bios v010.071

Bios source updated from 10.67 to 10.71...
PLL divider algorithm updated (Engine clock limit fixed)...
Plus other irrelevant technical mambo jambo...

Use ATIFlash with force switch (atiflash -p -f X filename.ext) X = adapter number.

Have fun.

Aye aye :D

---

Might be me that have some strange issues here... I have two 3850 256mb and running CF. I can only clock one card with rivatuner with this BIOS. Also, I can not clock any card with CCC.

Is there any solution for clocking both cards exept with flashing BIOS with fixed clocks?

Thanks for sharing though!! :up:

Regards / Anders

Quote:

---

Originally Posted by PhilDoc

Thanks guys, that cleared things up.

@Blacklash, was that run in standard mode or disabled for AI. Disabling the AI should give you the highest score.

---

disabling ai disables crossfire. score drops from 27,000 to 21,000 though everything like Gpu-z and ccc say it is enabled.