i have F12 on my GA-EP45-UD3R with my E8500 OC'ed to 4GHZ with 9.5x422 and 1.3000 Vcore
i have F12 on my GA-EP45-UD3R with my E8500 OC'ed to 4GHZ with 9.5x422 and 1.3000 Vcore
I wonder if the EP45T-UD3P is ever going to get a BIOS update :/
what's the difference between rev.1.0 and rev 1.1 for EP45T-UD3P?
Thanks vailr and dustin! F12 I go!
I have only B09.1120.1Quote:
Originally Posted by andressergio
BIOS F8c is latest atm....Quote:
Originally Posted by gurusan
can i get f10j bios from someone? I cant seem to find it anywhere
F10j, which mobo?
gimme your mail on pm i sendQuote:
Originally Posted by Rattle
Cheers :up:
Sergio
Thanks Stasio i have the CD that came with the giga but happened the same when i first installed worked fine then after some days i got an error and closes...i re installed and same .... also hoss31 sent me that same version but as i told you its not working i installed that one you haveQuote:
Originally Posted by stasio
Cheers and thanks :up:
Thanks Hoss for sending :up:
OK,bro.
Btw,BIOS F10j I found on JZelectronic (01.Dec 09).
thank you guys
I wonder if the EP45-UD3P (1.0, 1.1) BIOS will ever come out of f10.f beta and finally become a full release.Quote:
Originally Posted by gurusan
Just bought a Q9450 this afternoon for $150, and sold my Q6600 for $120 this evening. It's a modest, but nonetheless noticeable boost, and I'm happy to be using less power. :)
So they are actually continuing work on F10, then? Good to know, since 10f is the most recent on the US site, and that's dated August of `09. :(Quote:
Originally Posted by stasio
Latest for UD3P is BIOS F10k. :yepp:Quote:
Originally Posted by LoneWolf
-new feature "Quick Boot"
-released on 13.Jan 2010
GA-EP45-UD3P rev 1.0/1.1Quote:
Originally Posted by Rattle
F10k:
http://www.station-drivers.com/page/...-ep45-ud3p.htm
wasnt F10K kinda buggy reported ???
According to JZelectronic:Quote:
Originally Posted by andressergio
Info: Successfully flashed
Fix: LAN (Code10) for Quick Boot in the cold
:shrug:
ah i read in other forums "stay away from this one..." tough i never had that LAN probelm...will give a try thenQuote:
Originally Posted by stasio
Cheers :up:
Sergio
GIGABYTE
EasyTune 6
utilitaire
B10.0130.1
http://www.gigabyte.com.tw/Support/M...lity&FileID=86
for us P45 users this newer version no only load slow but in my case i hit apply and get instant freeze...Quote:
Originally Posted by vailr
you know what, i was so busy using 475fsb 24/7 i never attempted to go higher.
480x7 = 1024k orthos passed
485x7 = 1024k orthos passed
490x7 = locked up 1 minute 55 seconds into orthos blend
still 1.3 vtt 1.24 mch 2.2 vdimm
it was an unusually cold day so my 24/7 setting remains 475x7
Could anyone offer some advice on o/cing an E5200 on a UD3L? I used to have this thing @ 3.33GHz on stock cooling with a slight Vcore bump on an EP35-DS3L, but that board had a failed BIOS flash and I replaced it with this board. I've tried the stock multi and 9.5x.
Edit: spoke too soon. 12.5x272 (3.4GHz) @ 1.275V works, no other voltages adjusted.
this is my new 24/7 setting, passed 1 and a half hours orthos before i got impatient and stopped it.
http://b.imagehost.org/0662/24_7_setting.jpg
1.3 vtt 1.24 mch 2.2 vdimm
485 fsb also passes 1024k orthos but im sticking to 480 fsb for guaranteed stability in games. besides cant complain about 10k write and copy :D
490 fsb locks up after a couple minutes orthos blend but thats to be expected
GA-EP45-UD3P rev 1.0/1.1 - Bios F10 (Final)
http://www.station-drivers.com/page/...-ep45-ud3p.htm
finally F10 final version, will update in a few :D
heh guys whats the current best DDR2 kits you can buy for overclocking. I was just checking out Newegg and there seems to be alot of new kits I have never seen before, and some of the other ones I thought were real good are no longer there.
My OCZ Plat LV RAM needed to be RMAd and now they are sending me regular Platinum :(