The San Diego OC DISCUSSION Thread

Printable View

Show 100 post(s) from this thread on one page

06-15-2005, 04:48 PM
HousERaT

Quote:

Originally Posted by S&M

Just bought last night on ebay CABGE 0518 UPCW - that's a 3700+ of course - anyone seen it before ?

never seen a UPCW before..... I wonder what part of the world it came from? Let us know how it clocks.
06-15-2005, 05:07 PM
babyelf

guys.. so there's no early batch chip thingy right? lol.. 0516 TPAW here i come then :p

:D
06-15-2005, 08:37 PM
mrlobber

Quote:

Originally Posted by S&M

Just bought last night on ebay CABGE 0518 UPCW - that's a 3700+ of course - anyone seen it before ?

Definitely not much results with week 0518 and later chips around so give it a try and don't forget to inform us! :D
06-16-2005, 05:34 AM
irenic

2 Attachment(s)

here is my result with 0516 TPAW.. i can run super PI up to 2.95ghz but still failed prime at 2.8ghz. i tried 1.66vcore the highest because i dont think i need more than that..
06-16-2005, 07:05 AM
duploxxx

Quote:

Originally Posted by irenic

here is my result with 0516 TPAW.. i can run super PI up to 2.95ghz but still failed prime at 2.8ghz. i tried 1.66vcore the highest because i dont think i need more than that..

hehe same stepping ;) what's your full badge?

ada3700daa5bn
cabge 0516TPAW
1240918d50079

still working on the oc, current 2778@1,5vcore

http://users.telenet.be/duploxxx/oc/...v%2010x278.jpg
06-16-2005, 08:40 AM
irenic

i only remember this "cabge 0516 tpaw"

.. quite lazy to reopen my water block.. hehe

btw, urs seems like a good stepping.. mind tell me ur other setting in bios?
06-16-2005, 11:26 AM
uniacid

Quote:

Originally Posted by fareastgq

takes 5 mins. 5 careful careful mins, heh, sanding down the stock dfi HS bracket took longer, make sure u don't go into the chip deeper than 1/2 centimeter. you'll hit a chip, poof, no chip. mark it on your blade so you know to never go past that point, don't slip, and your good to go. Start with the corners, it's easier

So you sand down the IHS 1/2 cm ? wouldn't happen to be any guides I could read up on?
06-16-2005, 12:38 PM
fareastgq

Quote:

Originally Posted by uniacid

So you sand down the IHS 1/2 cm ? wouldn't happen to be any guides I could read up on?

I did not sand down the IHS, I sanded down the yellow thing that holds the stock heatsink in place. it bolts onto the MB. U have to sand down the same amt as the width of the IHS so your heatsink will make good contact.
06-16-2005, 02:27 PM
uniacid

Quote:

Originally Posted by fareastgq

I did not sand down the IHS, I sanded down the yellow thing that holds the stock heatsink in place. it bolts onto the MB. U have to sand down the same amt as the width of the IHS so your heatsink will make good contact.

OH now I understand, well I'm using watercooling and I guess I could lap the cpu block for better contact and tighten it down more
06-16-2005, 02:41 PM
stealth17

Quote:

Originally Posted by fareastgq

I did not sand down the IHS, I sanded down the yellow thing that holds the stock heatsink in place. it bolts onto the MB. U have to sand down the same amt as the width of the IHS so your heatsink will make good contact.

it depends on which hsf/waterblock you are using! with swiftch stuff, you do NOT need to do that...
06-16-2005, 05:14 PM
Tanktanium

1 Attachment(s)

Quote:

Originally Posted by irenic

here is my result with 0516 TPAW.. i can run super PI up to 2.95ghz but still failed prime at 2.8ghz. i tried 1.66vcore the highest because i dont think i need more than that..

Odd...I ran superpi 1M at 11x260 and got a few hairs of a second faster

I don't know the week number of my processor, sorry :(. Taking off the block and cleaning off the IHS is a big chore for me :/
06-16-2005, 05:28 PM
pumbertot

Quote:

Originally Posted by Tanktanium

Odd...I ran superpi 1M at 11x260 and got a few hairs of a second faster

I don't know the week number of my processor, sorry :(. Taking off the block and cleaning off the IHS is a big chore for me :/

maybe tighter timings on your setup?Drop your Idle Cycle Limit to 0 with A64 tweaker and i bet SuperPi is faster still. ;)
06-16-2005, 05:49 PM
pumbertot

Tanktanium, very similar CPUs?
vcores etc.;)

http://www.geocities.com/pumbertot.1...eenShot010.gif
06-16-2005, 08:55 PM
Tanktanium

I'm running on 1.4v vcore :D

Also got a CPU-Z validation of me hitting 11x273 (3005mhz) Not stable, of course :D. 3.8v 2-2-2-5 redline 1:1
BIX3 and PolarFLO TT cpu block. No chilling.
http://valid.x86-secret.com/show_oc.php?id=23557
06-16-2005, 11:59 PM
duploxxx

Quote:

Originally Posted by irenic

i only remember this "cabge 0516 tpaw"

.. quite lazy to reopen my water block.. hehe

btw, urs seems like a good stepping.. mind tell me ur other setting in bios?

you mean the mem settings? its all on minimum / tight timings except trc/trfc 8/10 read it from the dfi-street site. for bh-5 it is easy on the dfi, on my asus i have tccd and need to do it with a64 tweaker and that's a pain :slap:

syetem can go faster but need to mod my heatpipe and find some spare time...

duploxxx
06-17-2005, 05:20 AM
irenic

Quote:

Originally Posted by Tanktanium

Odd...I ran superpi 1M at 11x260 and got a few hairs of a second faster

I don't know the week number of my processor, sorry :(. Taking off the block and cleaning off the IHS is a big chore for me :/

for that 290htt, i ran my ram at 200mhz but i forgot to set it back to 2-2-2-5 .. i just ran it at 2.5-4-3-10 since that was the timing i used @ 280mhz ..
06-18-2005, 02:40 AM
Dani

Hello,

How about San Diego 3700+/4000+, do they have coldbug issue?
My 3200+ Venice have it, with VapoChill LS it did almost 3256MHz and with DI does'nt even 3.2GHz without freezeing on desktop..

So, how is't with San DIego :confused:
06-18-2005, 02:53 AM
mrlobber

Quote:

Originally Posted by Dani

Hello,

How about San Diego 3700+/4000+, do they have coldbug issue?
My 3200+ Venice have it, with VapoChill LS it did almost 3256MHz and with DI does'nt even 3.2GHz without freezeing on desktop..

So, how is't with San DIego :confused:

Mine didn't have.
06-18-2005, 02:56 AM
Dani

Quote:

Originally Posted by mrlobber

Mine didn't have.

Your SD or Ve?
If SD so give me some screenshot :)
How many MHz from Air/H2O -> DI :)

..and stepping and batch number, pleace :rolleyes:
06-19-2005, 12:10 AM
mrlobber

Quote:

Originally Posted by Dani

Your SD or Ve?
If SD so give me some screenshot :)
How many MHz from Air/H2O -> DI :)

..and stepping and batch number, pleace :rolleyes:

This is the San Diego oc discussion thread :p:

Here: http://www.xtremesystems.org/forums/...146#post911146

CABGE 0516WPAW

Not much more around as that was my first DI run ever. Gained around 500 bootable Mhz in Windows from Thermaltake Sonic Tower + 120mm fan. Saw posting 3350 as well but not able to boot to OS for quite mysterious htt problems.

Regarding Venice, some of my friends put a 3200+ under LN2 this weekend, they had the colbug kicking in at -30 to -60 temps. They still managed some benchable 3.3+ ghz, but had some weird experiences anyway.
06-20-2005, 02:34 AM
Tim

Hey guys, I just went through pages of this thread...but it's kinda hard to follow which steppings are the best...

I would like to buy a 3700+ SD, can you give me some steppings which are definitely worth it?

Thanks in advance..

Tim.
06-20-2005, 06:22 AM
eviLRuLeZ

Hi guys,

Do you know where Can I have a list with 3700+ San Diego Steppings?

I'm currently building a database :)

Thanks :)
06-20-2005, 12:39 PM
Levish

Just got a CABXE 0512XPMW - 3700+ (newegg)
going to use it under phase change (first attempt), I hope it's a good one.
06-21-2005, 12:32 AM
babyelf

Tim.. try 0516 TPAW..

so far it's looking the best.. my 0516 TPAW is coming if u can wait a while before getting it
06-22-2005, 08:53 AM
Tlord

Hey i have to pick up 2 3700+ SD's next week, they air both for OC on air. Can you guys advise me a good stepping?

Thanks

Show 100 post(s) from this thread on one page