3800+ 0601 TPMW results under vapochill ls coming soon :)
Printable View
3800+ 0601 TPMW results under vapochill ls coming soon :)
Get it go'in, I'm anxious to see how these do with real cold.:DQuote:
Originally Posted by TheMeatFrog
Can anyone please tell me something about the
CCBWE 0606MPMW
No search, not even google, turned up a result... Wondering if it even exists. :stick:
It's Toledo. Why bother? The good ones are FX-60 or Opty "Denmark".Quote:
Originally Posted by v0dka
Hey Jimi!
Guess what arrived in the mail today? Yup, your LDBFE 3800 finally came. I'll be throwing her under the evap as soon as I get my unit back. Just in case you didn't know, the autocascade's getting a *little* work done to her ;) :
http://www.xtremesystems.org/forums/...ad.php?t=97265
Time to see what these cpu's are TRULY capable of @ -141C :eek: :toast:
:woot: :woot: :woot:Quote:
Originally Posted by s7e9h3n
:YIPPIE: :banana:
Go buddy go go go :D
about 200mhz HTT i'd imagine.
:)
Sorry but can you please elaborate about this 3800+ being Toledo?Quote:
Originally Posted by stone_cold_Jimi
It is a 3800+ which is the Manchester core... That is what theya re offering me for cheap. What am I missing here?
Ofcourse the Denmark 165's are the way to go, 0608MPMW for example would be nice ;) however getting one of these is practivally impossible unless you spend big bucks. Even more so for us Europeans it's HARD to get any (good) Opterons... But that's going too far OT.
The toledo's have the CCBWE/CCB1E beginning while the manchesters have LDBHE or something similar like LDBFE. So the core that you THINK is a manchester is really a toledo with half the cache on each core disabled. More than likely it wont oc very well compared to the manchester x2's you see here. So dont get that chip expecting too much if you must buy it.
mmm just a taste of things to come...
http://img254.imageshack.us/img254/6...139v8pq.th.png
edit: aww just realised a64 wasn't refreshed :( Wasn't anything special anyways just my ballistix, bh-5 testing later this week :)
Those are some nice clocks and I am definitely hoping to see more. Ill keep my fingers crossed that you dont hit a wall anywhere because I have seen quite a few chips hit 3ghz + on phase with low volts but need a huge voltage increase to push to 3.2+
Ah yes, thanks for clearing this up. Havent been following this discussion at all I see. :fact:Quote:
Originally Posted by madgravity34
I fear you may be right but I really hope not. I don't think I've seen anyone try a BF controller at low low temps, so this is somewhat bleeding edge. This chip is 4M stable at 3200 @ single-stage temps, it could all get vairy interesting. :)Quote:
Originally Posted by don_vercetti
i got me a 603 yesturday, 255 right out the box, letting it run in a bit b4 i push harder.
Finished up benching around 1:45am with a dual 32M run at 3260MHz @ 1.55v(windows) Had to be up at 6:30am so I didin't have time to post the screenshots but I'll get them up when I get home from work today. The vapo was really hurtin at 1.55v, I saw temps as warm as -5 in MBM and evap temp was around -30-35 if I remember correctly. I hit some kind of wall after that though because I couldn't even complete 1M at 3300MHz with the same settings.Quote:
Originally Posted by madgravity34
Nice nice nice. :toast:Quote:
Originally Posted by TheMeatFrog
Chew* will likely tell you to break out the mousepot and try for 3500 lol. But I know what you mean about the LS struggling a bit when you whack some voltage in there, I think all Manchesters are like this. Anyways, that's a very fine overclock (CPU-Z verify asap) :up:
As promised... :cool:
Test Bed
CPU: 3800+ X2 0601TPMW
Mobo: DFI nF4 Ultra-D Rev. AD0 Bios 3/29
RAM: 2x1GB Crucial Ballistix Z503
Video: eVGA 7800GT @ Stock
PSU: OCZ 520w PowerStream
Cooling: Stock VapoChill LS
SuperPI 1M @ 3260MHz 1.55v
http://img188.imageshack.us/img188/9...155v6cx.th.png
SuperPI 8M @ 3260MHz 1.55v
http://img505.imageshack.us/img505/1...155v5hd.th.png
SuperPI 32M @ 3260MHz 1.55v
http://img199.imageshack.us/img199/4...155v7ds.th.png
CINEBENCH @ 3260MHz 1.55v
http://img177.imageshack.us/img177/1...155v7kl.th.jpg
3DMark03 @ 3260MHz 1.55v (forgot to open details :slapass:)
http://img177.imageshack.us/img177/2...155v0xu.th.png
3DMark06 @ 3260MHz 1.55v
http://img189.imageshack.us/img189/5...155v4zg.th.png
The Chip (LOL @ the batch # :eek:)
http://img174.imageshack.us/img174/4...19637fw.th.jpg
Some Pics of my Setup
http://img197.imageshack.us/img197/4...19853wn.th.jpg
http://img110.imageshack.us/img110/4...19709ih.th.jpg
DigiCam Pics of the 32M run
http://img178.imageshack.us/img178/2...20301zz.th.jpg
http://img232.imageshack.us/img232/3...20337qz.th.jpg
http://img232.imageshack.us/img232/8...20345cf.th.jpg
http://img232.imageshack.us/img232/4...20380du.th.jpg
Phewww, anyone else tired of looking at pictures? I sure am! :p: Hope you enjoyed.
:toast:
AAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH!Quote:
Originally Posted by TheMeatFrog
You broke my thermometer! :p: Did you? or was it like that when I sent it to you? :D
Hehe not broke, I didn't even notice that I don't know why it's like that, guess it was just in the process of chainging #'s. ;) Look at the picture taken later that night with the 8 showing fine. :DQuote:
Originally Posted by s7e9h3n
I still have a '05 here I haven't "phased" yet...I just remarked the leak during the first runs...still wanna burn the '06 series down with my old one -.-
suicide ~2960MHZ @1.5V initial result, not seen the 3 GHZ on it yet...anyone who repairs my compressor???
Just recieved my 2 x2 3800 manchesters. One is a LDBHE 0605 TPMW "n" and the other is a LDBFE 0612UPAW "t". Not sure which one to keep :)
Wow, 0612? Thats the newest one I have seen. Just for a prediction, I would bet that the 0605 does better at lower volts but the 0612 might just do better when scaling. You never know, the 0601's were godly, but there are always newer 060x or 06xx chips that might pwn ass as well. I would try both and report back here. ASAP lol
Well lads i got a LDBHE 0605 FPAW 3Ghz stable a while back on water with 1.6v. I just ordered another so i now have 2 of that stepping and a 3rd i can choose if its ok from a friend who will let me test.
Now i have 3 too choose from so ill be testing this friday hopefully under my new Custom Phase unit., YIPPEEEE
Results soon lads. :D
Also i pray i dont have a cold bug in at least one of the 3 CPU's. The LDBHE is about the best for non bug correct.
Well my LDBHE 0601XPMW is now 32m stable at 3048mhz thanks to you guys and some testing....my wall was 1.52v and 2974mhz for the longest time. The cure was 1.6v. It seems this "T" chip needs more volts to wake it up. I might try loosening up the bh5 at little also as I have it at very tight timings. I am water cooled as in my sig and temps are in the 22c range
Tonite when I get home I will see if it has more in "the winch"
Hello!
I bought a X2 3800 LDBHE 0605 EPAW (N chip)
I can oc up to 2500Mhz with default Voltage and pass Spi 1M,but in order to get stable (Spi 32M) at 2600 it needs 1,525V!!:( :(
Seems very odd to me...Do you have any details for my step??
I should mention that I use stock heatsink and temps are really low on cpu..(well PWM area gets really hot but I don't think that this is the problem..)