got artifact GPU > 1200 even inc vgpu up to 1.300v
any adv ?
got artifact GPU > 1200 even inc vgpu up to 1.300v
any adv ?
A little more info would be helpful.Quote:
Originally Posted by Gaul
Temps?
Mem?
Card Brand?
Ect.
Later:)
I have similar problemQuote:
Originally Posted by Gaul
1200/1800 @1181mv and artefacts (like red grid on 3d mark11) I'm also confused since gpu temp never went over 73C at highest load? Tested on Sapphire 7970 cars with 12.6b beta.
I tried it some time ago, it causes black screen after changing clocks to anything but stock...Quote:
Originally Posted by enkie
Now i'm on XFX 1000/1425 bios and i find it very good.
G8Quote:
Originally Posted by Jonik
(H2O Cooling)
Core i7 3930K@ 5100Mhz
HD 7970@ 1380/1850Mhz
P13419
Attachment 127399
nice Jonik :)
What vgpu max in AB , 1.4 or 1.5 ?
Thank you! Comming soon 1400+ Mhz coreQuote:
Originally Posted by enkie
AB 1.7Vmax :D (NDA edition)
Attachment 127412
ok nda edition , thx
Any one can Max the sliders out and (NOT) apply the settings and show actual prove of the successful benchingQuote:
Originally Posted by Jonik
with out artifacts at (Those) settings without Heat or issues.;)
My 2 cents.
Later:D
Оn water cooling I'm using 1.35-1.4V max.Quote:
Originally Posted by Irocing
1.7V, I course will not apply- it is dangerous. Аll parameters are applied!
1.38v gives 1.32v see 1.30 in heavy load on my sapphire (watercooling) , therefore 1.45V gives 1.38v real so playable for benching ,rise above 1.45V in watercooling will be dangerous .
The bottom line is (PROOF) with your settings applied and a succesful run with Heaven.
and the settings you used.
I can run thru Heaven at 1250/1800, (No benefit) on the mem above 1250 below 76C but once I get to
1300 core starts pushing 80C but no artifacting.(YET)
1250/1650/1.200v and good to go.
Only get in trouble as to heat in Benching and not gaming.
Ambient as usual plays a big role.
Later;)
What's your card setup ? Reference AMD cards + NDA AB version ?Quote:
Originally Posted by enkie
reference card amd
That is a to be released version or just to be kept indoors ?
I'm running mine at 1150/1650 @ 1.56v stable, testing 1250/1650 @ 1.235v, but not quite stable.Quote:
Originally Posted by MisterMagoo
Hi,
1150/1650 @ 1.56v, mistake ?
Yeah, 1.156
wait, am i reading that right? you are putting 1.7v to the card? my stock is at 1.17v? wouldn't 1.7 kill it lol!?Quote:
Originally Posted by Jonik
if 7950 that is normal, most can only do around that at max, if 7970 then maybe you got a low clocker :PQuote:
Originally Posted by Gaul
What's the asic quality in gpuz?
nice score :up: but you miss 1000 pts on the physical score :( why ?
I do not know:shrug: Version 3D Mark 1.0.1Quote:
Originally Posted by enkie
May be Windows:confused:
up to 1.0.3 for test .
i got offered a 7970 that can do 1300 core at 1.22v on water and up to 1380 core max
is that a golden card?