@donmarkoni
yes, but I have 3T in the bios.
it seems that cpuz displays incorrectly.
Printable View
@donmarkoni
yes, but I have 3T in the bios.
it seems that cpuz displays incorrectly.
(NEW GUY!)
Quote:
Originally Posted by donmarkoni
Quote:
Originally Posted by jacek
3N, not 3T. 3N is the timing mode, 3T is the command rate :). Or am I wrong in thinking they are seperate things?
What speed is your QPI at?Quote:
Originally Posted by zsamz_
as high as it will go:rofl:Quote:
Originally Posted by NathObeaN
3500ish
i figured it out
higher the ulk frequency = better bandwidth
so i got 1.4v qpi vtt to play with lol
Aye I knew it would be one of them as I was having a play with it last night, trying out Slow Mode on the QPI etc. Quite supprising the difference QPI speed makes both to the CPU and RAM performance.Quote:
Originally Posted by zsamz_
Interesting. Check with CPU Tweaker, Everest and/or some other. I'll check mine when I come home from work.Quote:
Originally Posted by jacek
You are wrong and I am right! :D Just kidding! :toast: I'm not sure, but I think it's the same thing.Quote:
Originally Posted by NathObeaN
Quote:
Originally Posted by paill
I'm confused... You have a 6 core at 5.84GHz, I have a 4 core at 4.02GHz and I get more CPU points than you...Quote:
Originally Posted by Splave
http://img42.imageshack.us/img42/171...arkvantage.png
EDIT: You kick my CPU's arse on CPU test 1, but one CPU test 2 you are worse than me for some reason?
Excellent board. Best of the best :up:
Are you going to join the club?! :)Quote:
Originally Posted by WaterFlex
Do you happen to be running an nVidia card by any chance :rolleyes:Quote:
Originally Posted by NathObeaN
Turn off PhysX :up:
I thought it may be PhysX but being that it is a "CPU" test I would have thought it was for the "CPU", bit of a gimmik really :down:.Quote:
Originally Posted by DuraN
Thanks for the heads up anyway, makes sense now.
EDIT: 25K :rofl: How shameful! That totally shows how bias Futuremark is towards Nvidia :rolleyes:.
It's because the PhysX on the GPU is much better than a CPU at calculating physics. But yeah, gimmick :)
So I flashed from 0402 to 0602. My northbridge temps have dropped about 6-7 degrees celsius... or Asus mangled the software reading to make me feel better.
Also fixed the bug with TurboV displaying the wrong PLL voltage.
Just imagine a few more degree drop when using 0702!Quote:
Originally Posted by Kilyin
so you finally ditchin that mfII board lol
Quote:
Originally Posted by WaterFlex
Where can one download 702 from? I dont see it on FTP site...Quote:
Originally Posted by Kensek
EDIT: Even with 0602 my IOH and ICH temps are rediculous and I never checked the temps with 0402 so I have no reference to check to see if my temps went down or not. This board is most definitely going to get a full cover block that is for sure.
yes VTT 1.5VQuote:
Originally Posted by Splave
http://img18.imageshack.us/img18/8597/vanup.png
I like RIIIE :D
Got a little problem, when system is cool & you start up for the first time the memory only shows 4gig of the 6gig.
If you enter bios shows 4gig & then turn off computer & re-enter bios it shows 6gig, noproblem after that.
Tested different memory slots ect & shows 0 errors on memory test.
Any one have an idea whats going on?
A lot of people are having problems with ram showing 2 gigs or more missing.. i would try and reset the ram with stock timings and if that doesnt work bump qpi up a notch or two. Also it can be the Heatsink is tightened down to tight. Eva2000 posted a thread on this on http://i4memory.com/f54/asus-x58-6-1...stalled-19200/ Hope this helps. :up:Quote:
Originally Posted by TheHardCase
I also noticed that my memory which is set at stock of 1600 shows as 1066 when cold booting, but if I re-boot it immediately it then shows the proper 1600 during post. Seems this board has problems with memory, so hopefully it is just bugs that need to be worked out of the bios....
i had serious problems i'm sure others are having
i couldnt overclock as soon as it booted in memtest or windows pc would
reboot even at a low overclock
i thought my memory was failing then another set then another set i went nuts
then i set memory @ 1333mhz and overclocked the cpu cause memory was stable @ stock n boom error
if you cant overclock the board reflash bios
i recreated problem 3 times:eek:
every time was solved by reflashin bios
bios is gettin corrupt
i think its either the board or some bad bios chips
i will contact asus to send me some new bios chips
I had 2 gigs missing for a while, and reseating my VenX about 3 times loosening up each time I got it back.
I had the EXACT same problem as zsamz_. Complete corruption of bios but still pass POST. Thought I borked my memory and even tried second bios chip. Second chip worked better but not normal. Only solution was a reflash.Quote:
Originally Posted by zsamz_
Now back to 2000+ CAS 7 with ease.
:shrug:
you lucky you didnt go throught what i went through to discover this:rofl:Quote:
Originally Posted by turtletrax
took 4 hours:mad:
While I am not at Cas 7.. I am really happy with this combo.. RIIIE , Patriot 2kLL, & W3570
This looks promising for a 24/7 set up..
I could not get the Ram to goto 2k without raising the QPI/VTT to 1.58/1.6 with both my 930 & 920..
I finally have some good luck.. only need 1.41 VTT with this set up. and lower dimm v:):)