Printable View
So for my Intel build option I overlooked this board for some reason..
Mega Shadow/Megahalems on this board in traditional exhaust out back of case orientation with 2x 25mm fans/push/pull doable on this board with no fitting issues with RAM with reasonable sized heat spreaders (e.g -http://www.memoryc.com/computermemory/ddr3ram/6gbgskillpc312800hkcl8triplekit.html) ?
After a bit of help here guys. Been playing around and doing some benching with my UD7 for the last week or so, and really pleased with it so far. However, come accross some strange results. Basically with my i7 @ 4.4ghz I get higher scores in both vantage and 06 then if I get it to 4.5ghz. At first I thought it was my GPU's or drivers/software etc, however im now pretty sure its not that, and it has something to do with the board/CPU overclock. Here are my best scores at 4.4ghz so far:
http://img231.imageshack.us/img231/1...4ghzresize.jpg
http://img137.imageshack.us/img137/9413/3dm06resize.jpg
Now, at 4.5ghz im pulling around 28,000 marks in 06, and 27000 in vantage which is really odd and I cant for the life of me work out why?
The only thing I can think of is i have the NB cooled on air with just the waterblock - I havnt installed the huge cooler as it means I cant use the PCI-E 1x slot for my sound card. I think temps are ok however - everest doesnt go above 55 degrees on the NB under load. Im assuming the "motherboard" temp reading in everest is the NB temp?
Any ideas? anyone come accross anything like this - pointers appreciated! :)
You should get a better CPU-score with 4.5ghz, unless it is missing something or is unstable.
It is a good idea to test the CPU and RAM stability before checking the 3D-score.
Well, its LinX stable for 10 mins (all I tested it for) at 4.5ghz, which should be plenty stable enough for 3dmark. Just seems a bit strange thats all. The SM2.0 score goes up at 4.5ghz, the CPU score does a little, but the SM3.0 score goes down which is what initially made me think it was GPU/driver/software issue. The strange thing is that there is no prob at 4.4ghz. Actually, when you watch the FPS at 4.5ghz it seems higher than at 4.4ghz but its just not registering on the score. Very strange. Im on the original bios so i will give the BETA a shot and see if that makes any difference.
Please share your results if the BETA fixed your issue.Quote:
Originally Posted by MikeMK
Sure will do... have you seen similar probs?
What am I doing wrong? bclk=217 and no post. bios f3m. c1 code on display. :shrug:
Any help is appreciated.
CPU Clock Ratio............................: x18
Intel(R) Turbo Boost Tech..................: DISABLED
CPU Cores Enabled..........................: ALL
CPU Multi Threading........................: ENABLED
CPU Enhanced Halt (C1E)....................: DISABLED
C3/C6/C7 State Support.....................: DISABLED
CPU Thermal Monitor........................: DISABLED
CPU EIST Function..........................: DISABLED
Bi-Directional PROCHOT.....................: DISABLED
Virtualization Technology..................: DISABLED
Uncore Clock Ratio.........................: x16-18
Uncore Frequency......................(Mhz): 3472
Isochronous Support........................: DISABLED
BCLK Frequency (Mhz)......................: 217
PCI Exxpress Frequency (Mhz)...............: 100-105
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)..............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0
Performance Enhance........................: STANDARD
System Memory Multiplier (SPD).............: x8
Memory Frequency (Mhz).....................: 1736
Cas Latency Time.............................: 9
tRCD.........................................: 9
tRP..........................................: 9
tRAS.........................................: AUTO
LoadLine Calibration.........................: [STANDARD]
CPU Vcore....................................: [1.35]
QPI/VTT Voltage..............................: [1.4V]
CPU PLL......................................: [1.8]
PCIE.........................................: AUTO
QPI PLL......................................: AUTO
IOH Core.....................................: 1.24
ICH I/O......................................: AUTO
ICH Core.....................................: AUTO
DRAM Voltage.................................: 1.66
DRAM Termination.............................: AUTO
Ch-A Data Vref...............................: AUTO
Ch-B Data Vref...............................: AUTO
Ch-C Data VRef...............................: AUTO
Ch-A Address Vref............................: AUTO
Ch-B Address Vref............................: AUTO
Ch-C Address VRef............................: AUTO
Bios X58AUD7.F3m is not good:down: Flash with X58AUD7.F3k.Quote:
Originally Posted by jacek
I updated the bios to f3k but it does not help.
When I set
PCI Express Clock Drive.................: 1000mV
computer starts very slowly and restarts on.
:mad:
Seem the F3K no good for my cpu,
I can do 1.387v 4.6G pass linx 50 run on F3G bios, but need 1.4V on F3K bios.
BIOS F3 will be public very soon.
F3m didn't work so very fine for me, but others have been working fine and almost the same.
F3 is released , dowmload
Any other detailed release notes for F3? Apart from core i7 6 core processor info.Quote:
Originally Posted by Sam_oslo
Anyone notice anything new with this F3? So far I notice nothing different, this board is great, but it just doesnt like high memory mhz, my classified could do it easily.
I still prefer this board though as high mem mhz doesnt really make a difference in games and programs for me. It would be nice to have the choice of oc'ing memory though.
BIOS F3
I had to add 3 notches more Vcore compared to my Primestable setup with BIOS F3c.
I've never had a serious LinX-run on this setup before, so I'm not sure if LinX needs more Vcore, or the new BIOS, or maybe it is a combination av both.
@4.22GHZ(222x19) 1.21v 20-Run LinX stable
http://img.techpowerup.org/100201/Ca...0-20100201.jpg
Anyone know if the UD7 will support 32nm chips out of the box well enough to update BIOS to the latest?
I'm about to pull the trigger I think, ordered a RIIE that turned up DOA and I've got an X5677 that needs a home.
Yeah, LinX requires more vCore, you got that right. :up:Quote:
Originally Posted by Sam_oslo
Anyone had any luck with 2:10 RAM divider? So far I haven't been able to boot using the 2:10 divider (at overclocked speed of ~4.1g).
Probably a stupid question,but can you boot from the SATA 6Gbs ports on this board ?
Somewhere i read that you cant boot from SATA 6Gbs ports, i cant remember which board it was in relation to .. maybe this or the Asus or maybe im imagining things...
4.4g 2 hours prime stable on air :)
Venomous X ZM-F3 push / GT AP-15 pull
Ambient is 22.3C
1.32vtt
Batch is 3945A906
http://i45.tinypic.com/2meuzvm.jpg
yes, look at this post:Quote:
Originally Posted by LarsMarkelson
http://www.xtremesystems.org/FORUMS/...&postcount=225
f3 bios does not help with bclk in my case.
Cool, thanks. 200bclk is pretty low though, hopefully newer bios will help later on.Quote:
Originally Posted by jacek
Yeah, you are right. LinX needs more, but I was expecting 1 or 2 notches, 3 is a lot av Vcore for my low-volt babe :) I'm still not convinced if this this new BIOS F3 is totally innocent in this.Quote:
Originally Posted by zalbard
Just checking the RAM with the new BIOS:
3x2GB Corsair XMS3 1600MHZ CL7 (ver. 2.2) @1776MHZ 8-9-8-20 1.64v HperPi32M stable
http://img.techpowerup.org/100202/Ca...1-20100202.jpg
Yes, you can boot from the SATA 6Gb/s ports. I tried it and it worked fine, although a bit slower than the Intel controller when using a regular SATA 2 drive. I have *not* tried it since the BIOS update that also updated the Marvell controller firmware.Quote:
Originally Posted by S1nn3r
Killed my UD4P and looking at the UD7 - easy enough to break 223BCLK without modding? My chips saw 4.6GHz stable but board limited me :(
~Bex
You can easily raise the PCIe bus on the X58A-UD7 so 223bclk won't be a problem.Quote:
Originally Posted by RCG_Bex