Did you go back to F7 to confirm?Quote:
Originally Posted by andressergio
Printable View
Did you go back to F7 to confirm?Quote:
Originally Posted by andressergio
i go back to F8f and i pass more time of prime lower volts, i go to F8 and same as F3 cant find a middle point like good old LLC1...
thanks guys i think GIGABYTE needs to check this bios as they incoporated nice things loads faster but needs some work on them
flashed to F4a and locked up on loop 12 of prime pfffffff if not a good bios will go back to B2 F8f this is kinda frustrating
hiya mate not really tried much on the f3 or 4a but i do know that all the later bios needed a jump of 2 notches on vcore to have the same speed prime stableQuote:
Originally Posted by andressergio
i flashed to f3Quote:
Originally Posted by andressergio
i did manage to boot @ 52x
man this gigabut board flacky
i been on it 10+ hours n nice boot loops 4E and reboots
woulda been nice if it had a profile save like asus:rolleyes:
mate F11 save profiles F12 load ;)Quote:
Originally Posted by zsamz_
should i put on f8f biosQuote:
Originally Posted by andressergio
i will go back for sureQuote:
Originally Posted by zsamz_
yes but for my tests only need vdimm, in my case vtt dont help the more the worse, vcore on F8f was 1,428 LOAD 1,452 IDLE VDIMM 1,68 (all set on bios) now on new bios even F8 or F3 or F4a i need 1,7 and when its going to finish the hour of prime bsod with 124...Quote:
Originally Posted by GLENBOY
@bios wont go back:(Quote:
Originally Posted by andressergio
this one mate :up:Quote:
Originally Posted by zsamz_
http://www.fileden.com/files/2009/12...7aud7.f8f1.zip
thanksQuote:
Originally Posted by andressergio
please tell me what i'm doin wrong
i cant do nothin with the board
i did boot 100x52 to windows on f7x 1 time
i'm close to takin board out n rma this b2 board
Code:
### MB Intelligent Tweaker ###
Advanced Frequency Settings:
CPU Clock Ratio .......................................[ 50
> Advanced CPU Core Features
CPU Clock Ratio .......................................[ 50
Real Time Ratio Changes In OS .........................[ Disabled
Intel(R) Turbo Boost Tech .............................[ Disabled
Turbo Ratio (Core 1)...................................[ Auto
Turbo Ratio (Core 2)...................................[ Auto
Turbo Ratio (Core 3)...................................[ Auto
Turbo Ratio (Core 4)...................................[ Auto
Turbo Power Limit (Watts)..............................[ 1000
Turbo Current Limit (Amps).............................[ 500
CPU Cores Enabled ............................ ........[ All
CPU Enhanced Halt (C1E) ...............................[ Disabled
C3/C6 State Support ...................................[ Disabled
CPU Thermal Monitor ...................................[ Disabled
CPU EIST Function .....................................[ Disabled
Bi-Directional PROCHOT ................................[ Disabled
<
Spread Spectrum .......................................[ Enabled
BCLK/DMI/PEG Clock Control ............................[ Enabled
BCLK/DMI/PEG Frequency Control ........................[ 100
System Memory Multiplier (SPD) ........................[ 21.33
Advanced Memory Settings:
System Memory Multiplier (SPD) ........................[ 21.33
Performance Enhance ...................................[ Standard
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving A Rank A. ........................[ Auto
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto
Channel B Timing Settings:
##Channel B Standard Timing Control##
CAS Latency Time ......................................[ 9
tRCD ..................................................[ 9
tRP ...................................................[ 9
tRAS ..................................................[ 40
tRC ...................................................[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR ...................................................[ Auto
tWTP ..................................................[ Auto
tWL ...................................................[ Auto
tRFC ..................................................[ Auto
tRTP ..................................................[ Auto
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ AUTO
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto
Advanced Voltage Control:
CPU
Load Line Calibration .................................[ Level 1
CPU Vcore .............................................[ 1.44
QPI/VTT Voltage 1.050v ................................[ 1.15
System Agent Voltage 0.925v ...........................[ Auto
PCH Core 1.050v .......................................[ 1.1
CPU PLL 1.800v ........................................[ 1.8
DRAM
DRAM Voltage 1.500v ...................................[ 1.64
DRAM Vref 0.750v ......................................[ Auto
DRAM Termination 0.750v ...............................[ Auto
Ch-A Data VRef. 0.750v ................................[ Auto
Ch-B Data VRef. 0.750v ................................[ Auto
Ch-A Address VRef. 0.750v .............................[ Auto
Ch-B Address VRef. 0.750v .............................[ Auto
Miscellaneous Settings
Isochronous Support ...................................[ Disabled
Virtualization Technology .............................[ Disabled
Quote:
Originally Posted by zsamz_
1,66 vdimm
1,47 vcore LLC1 has big drop 1,452 IDLE 1,428 LOAD
enable boost tech
no need of more PCH than standard
vtt 1,1 should be fine
nice boot loop:rofl:Quote:
Originally Posted by andressergio
you need more vcore man, SB OCing is so simple.
lol and most chips are sucking. BTW back off the ram, do one at a time.
Yeah saw a fail chip on OCN...2600k needing PLL for x45....
chip a 2500kQuote:
Originally Posted by sin0822
i got it to boot @ 52x once on f7x
now on f8f i can only get to 47x
i'm on phase so i did push to 1.58v
dang :confused:Quote:
Originally Posted by zsamz_
i set vtt to 1.18 booted into windows @ 53x
jumped to 55x
what safe max vtt lol
tryin to boot @ 53x again:rofl:
I bench with around 1.16-1.2 ish depending on memory speed and timings:up:Quote:
Originally Posted by zsamz_
thinkin of buyin another cpu ....but might be the boardQuote:
Originally Posted by l0ud_sil3nc3
now i cant go into windows @ 47x:rofl:
it just reboots after windows screen
EasyTune6 (Intel) B11.0323.1
http://download.gigabyte.us/FileList..._et6_intel.exe
i was using sata2 ports
windows is fried :rofl:
you have a b2 don't you? if you do you might as well RMA, I have not had any problems with my UD7 b3, i.e. cold bootQuote:
Originally Posted by zsamz_
its lookin that wayQuote:
Originally Posted by l0ud_sil3nc3
i couldnt even reload windows on sata3
i'm reloading windows on last sata2 ports
does your sb heatsink get hot?
mine @ 35c runnin stock reloading windows
i'll play for another hour n clean up the board
2 sata2 ports are gone
@ least i know cpu good for 53x
Why didn't you enable PLL Overvoltage?Quote:
Originally Posted by zsamz_
If you can boot into x53 on one BIOS but x47 on another, that's probably the reason.
But B3 bios version F3h is probably the most stable one to use on the UD7. No boot loops when using PLL Overvoltage (required for multiplier >47). F3 final has some bugs.
i ennabled itQuote:
Originally Posted by Falkentyne
thats how i got to 53x before the sata ports crapped out lol
now all sata ports gone:rofl:
Today is the last day I have to decide through retailer if i want to RMA my B2 for a B3. I'm really confused! Help?
Go ahead. :DQuote:
Originally Posted by Nostromo
i got a dead hd for my b2 troubles lolQuote:
Originally Posted by Nostromo
gonna rma the board now and the wd black:(
Why would you not? Just do itQuote:
Originally Posted by Nostromo
Yup, why the hesitation?? Do it now!!Quote:
Originally Posted by Nostromo
I'm concerned that my B2 has taken out a HD like "szamz" board did. The SATA ports seem to be acting up as well.Quote:
Originally Posted by Nostromo
I have just been given a date to swop my B2 and..........The B2 is packed (carefully) and ready to go! :up:
Hmm, strange... My B2 killed HDD in 2 hours the very first day (1/9). First was getting slower and slower, then partitions disappeared, finally the disk disappeared from windows. All manufacturer tests failed. Spinrite failed. Had to RMA it.
Just installed on win7 64, quick run
Vcore bios 1.54 and LLC 10
http://img850.imageshack.us/img850/9...enshot003k.jpg
This chip walled @ 5.65G on MIVE. Lol
http://img857.imageshack.us/img857/3...nshot002oe.jpg
Ok, I started the RMA to exchange the B2 for a B3 they are shipping the B3 first, will have it monday!
Excited!
lucky youQuote:
Originally Posted by Nostromo
i was told by gigabyte usa that canadians will have to wait untill they have more stock
wtf exchange only for american customers for now
and they can't even give me a freakin eta
so i gotta keep this POS board for a month or 2 untill i can get an rma
so i gotta buy another board to play
i'm 10000000% sure it wont be a gigabut
You never cease to impress.Quote:
Originally Posted by Dumo
Excellent news man!Quote:
Originally Posted by Nostromo
I hope it's not like that I wanted to rma mine in couple of weeks.Quote:
Originally Posted by zsamz_
if its too late with your retailer .....Quote:
Originally Posted by skeyo
gigabut dont care canadians must wait
they will just give you the runaround untill they get enough stock
customer service will tell you "well you should have sent it back , now stfu"
thats exactly what was said to me
i'll be waiting ti'll b4 version :rofl:
Contact the place where you bought the board. They'll do a better job of it.Quote:
Originally Posted by zsamz_
the place i bought it from can't help me lolQuote:
Originally Posted by Falkentyne
so i guess i gonna have to wait till gigabut decides they gonna do the same exchange for canadians as they are doing for the rest
i should just ship it to intel:rofl:
Hey guys
My UD7 B3 came with F1 bios...
Max multi was 52×. But when i update on latest beta bios max multi was 51×. I tried all beta and still 51× was max :confused:
Where can i get F1?
One more thing...
I can't install Easy tune6.
I get this error...
http://www.shrani.si/t/18/5R/2CnMIJJ4/untitled.jpg
Strange you get only up to 52x. Why not try bios F3 or F4a? Find them here.Quote:
Hey guys
My UD7 B3 came with F1 bios...
Max multi was 52×. But when i update on latest beta bios max multi was 51×. I tried all beta and still 51× was max
Where can i get F1?
One more thing...
I can't install Easy tune6.
I get this error...
I tried F3, F3C, F3H, F4A... max 51×
F1 52× with no problem.
You need to kickup Backup BIOS (hope you didn't flash and is still F1).Quote:
Originally Posted by cole2109
Then use @BIOS and save to your HDD.
Use latest ET6,your is old.
All this you can found 2-3 pages back.
I had that once after trying to update ET then trying to remove/delete it. Somehow I solved it by installing everything from the GB driver CD. Sorry cant be more specific...Quote:
Originally Posted by cole2109
ET6 is latest!
Edit:
I download latest version and tried gigabyte CD.
Uninstall previous and install EasyTune6 (Intel) B11.0323.1.
http://download.gigabyte.us/FileList..._et6_intel.exe
:confused:
http://i9.aijaa.com/b/00278/7894257.png
I deleted everything from register and still can't install.
Edit:
Max. voltage on CPU for 24/7 on water?
F3 bios erratic !! having to eat my words when i said F3 was the best bios . . now i cant even believe gigabyte posted as official bios , but i would have to believe cause they follow this forum , after testing for a week now and only get by processor to run 1.464 idle and 1.440 load with any llc vs vcore combo at 4.8 with a raised vdimm and vtt voltage , I was thinking damn chip degradation from priming so much . . so i went back to f3h and starting my overclock aging on my board from scratch . . back to 1.452 idle and 1.416 load at 4.8 lower temp and even longer prime runs now . . happy my chip is running like new , and Ive run some of the longest prime runs . . be careful with your bios revisions and test test test , I have to give F3 a bad mark in not having a standard in voltages and fluxing to much across the board :down:
DAMN zsams you have the worst luck with these boards lol . . My b2 was actually working like a champ on all my satas, and thats with getting slammed with streaming in my house to my tvs and torrent it to death lol , but guess that why intel is taking such a pricey kick in the ass with this . . hopefully soon you get another board dude :yepp:Quote:
Originally Posted by zsamz_
well its officialQuote:
Originally Posted by the_real_7
every chipset gigabut has made in the past5 years has died in my hands:rofl:
whats funny is that i havent killed any other board
just my gigabut luck
if i gotta wait a month or 2 for rma i gonna rant n buy a sata2 pci-e card
well this board is far from perfect, but you do have really bad luck with the gigabutts:ROTF:Quote:
Originally Posted by zsamz_
just wait and rma it, and in the meantime add pci sata card to get you through the wait
i was right zsamz_ GIGA on your hands is like a Karma lol
today i tested my SATA's im using 2 SSD and 3 x 1TB raid0 and still same speed than months agoQuote:
Originally Posted by the_real_7
hope you dont get my luck you bein so far away lolQuote:
Originally Posted by andressergio
Sergio your the opposite of zsamz lol , you always just have the best luck with giga boards lol , I haven't yet seen you have problems :)Quote:
Originally Posted by andressergio
Quote:
Originally Posted by the_real_7
the ich is just a timebomb sooner or later :explode:
death toll on gigabut
2 865
1 965
6 p35
2 p45
1 48
1 p55
1 x58
1 p67
and i keep comin back for more :rofl:
funny i only killed 1 abit a few asus boards and thats all from moding n solderin for xtra juice
Yo your my freind dude but damn stop killing those poor giga boards lolQuote:
Originally Posted by zsamz_
no more excuses on my dfi ut p35 still running cuase so has mine been only had it retired 1 year in box lol
the most abused board i have is the ut p35Quote:
Originally Posted by the_real_7
man that board took some abuse
and still runnin @ stock in a htpc
i was actually verry gentle with the gigabuts lol
i had 2 of em die @ stock:ROTF:
well i knew since first day as all my things mate but i have good luck on hardQuote:
Originally Posted by zsamz_
passed 4900 prime 1 hour on F3h loaded 1,392
passing 5000 on same bios 1,416 loaded
back to heaven...this lasts bios are super erratic
sorry for you been delayed on RMA but its better that than me that i have NO RMA
all things i bought there never failed :up:Quote:
Originally Posted by the_real_7
Quote:
Originally Posted by zsamz_
they just don't want you to kill another board.Quote:
Originally Posted by zsamz_
now b/c of you all canadians has to suffer.:slapass:
if you rma just gonna cost you xtra$$$;):p:Quote:
Originally Posted by andressergio
i bought a sata2 pci card should be here tuesday
i dont kill boardsQuote:
Originally Posted by nijel
if they are deffective they will surely die in my hands
my ud7 not dead the ich is
i went back to BIOS F3h as ma mate real 7 recommended me and passed easy prime at 4900 HT no internal PLL and cost me a bit to pass at 5000 HT but i did it
here the screens
all on BIOS F3h LLC1
4900 HT
http://img84.imageshack.us/img84/202...600710727s.jpg
http://img98.imageshack.us/img98/202...600710727s.jpg
5000 HT
http://img836.imageshack.us/img836/7909/5000z.jpg
http://img26.imageshack.us/img26/9624/50001d.jpg
cheers !
Sergio
@ andressergio
I think u forgot to set dram 2133MHz hehe
no owi i was testing CPU but i already primed same settings on 2133 on F8f im just trying this bios comming from B3 so far F3h its best for meQuote:
Originally Posted by owikh84
i will retest on 2133 tomorrow :up:
Is the UD7 worth the extra $143 over the UD4, I mean for a 2500K aircooled..
UD5 is.
UD7, no idea...only reason to get UD7 over UD5 is the 2 extra marvell SATA3 ports, NF200 for x16/x16 SLI, POST code display, and a couple of more USB. 24 vs 20 phases won't make a difference, both boards can reach WR clocks on a good cpu.
We only have UD3,UD4 and UD7 here.. Dunno why they are not stocking the UD5. So i guess its UD4.
here owie :up: didnt need anything extra to 4900 HT stable prime will go for 5000 HT 2133 now
http://img705.imageshack.us/img705/1...0727runing.jpg
cheers :up:
Sergio
nice work Sergio :D
Nice clocks and chip sergio.
Cant wait to get a better 2600K from a friend of mine.
As usual I will run Prime custom blend min FFT 128k 3200MB and latest LinX will surely narrow the distance to TJ Max.
suddenly Costa Rica batch is flooding into Malaysia I wouldn't hesitate to try my luck again.
oh ! my friend nice to have you here :up:Quote:
Originally Posted by The|Hunter
yes i dont buy random i had really bad luck on them i wish you the best on that !Quote:
Originally Posted by owikh84
here the 5005 HT on 2133 C7 same volts LLC1 no need to touch anything but vdimm and PLL from my 5ghz template
http://img855.imageshack.us/img855/4...727running.jpg
http://img717.imageshack.us/img717/8...710727idle.jpg
cheers to all :up:
Sergio
some excellent stuff here Sergio . . . good job :up:Quote:
Originally Posted by andressergio
Something from my side. Nothing special but it's enough for me.
1.4V in idle.
http://img709.imageshack.us/img709/9144/ud74821.jpg
My UD7 B3 is now dead, only lasted a few weeks. Doesnt power up, fans spin for half a second then it shuts down. Tried 2 CPUs, 2 PSUs, 2 kits of mem, 2 GPUs. Board is not getting power. Sucks, who knows how long an RMA will take :(
My motherboard yesterday was in a similar state. I took out the battery for a while and it works.
Tried that :/
oh no sorry to hear Eldonko :( that sux what happened ?Quote:
Originally Posted by Eldonko
4800 is very nice mate :up:Quote:
Originally Posted by jacek
thanks bud :up:Quote:
Originally Posted by the_real_7
Nothing that I know of. Board just stopped working for no apparent reason. Hope it wasnt bios F3 that killed it somehow, it worked fine with F3 for a week. :confused:Quote:
Originally Posted by andressergio
i dont think bios but i went back to F3h and mine is B2 and as u can see im stable again after the non stable nightmareQuote:
Originally Posted by Eldonko
wish you luck mate :up:
Thats exactly how my UD7 acted when it died. Fans spin for less than 1 sec and board shuts off, long cmos clear did nothing, different psu, cpu, mem nothing worked.Quote:
Originally Posted by Eldonko
Im not sure how long the RMA process takes, Im still waiting for my new board. I shipped it out last monday.
If can wait a lil bit swap for a Z68 guys, it's around the corner already.
Shoot that sucks, probably wont be the last UD7 that dies like this then. I registered for RMA today, I hope this will be fast.Quote:
Originally Posted by OC Nub
keep us postedQuote:
Originally Posted by Eldonko
i cant even get my b2 board replaced:mad:
i wouldnt mind doin a simple rma then an exchange
I hope my UD5 won't die like that. It's been just as stable (with F3g) as my P5wdh board before it. But then again I'm not using any fancy stuff...
(only blue screens are with the X-fi, starting Xtrap games occasionally...)
F3 final is less stable...(XP crashes on shutdown sometimes)
yes F3 are unstable bios. go back i did to F3h and stable again, my friends on UD4 UD5 and UD7 reporting the same on last biosQuote:
Originally Posted by Falkentyne
cheers
Sergio
Hi guys,
just stumbled upon this :
Z68-UD7 to be released pretty soon.
Now look at the box cover :
http://hw-lab.com/uploads/hardware/m...3_box_x500.jpg
Looks like UEFI coming to Gigabyte at last (Touch BIOS).
Any chance to get UEFI on our P67A-UD7 boards? if not I would be super-pissed really.... :crazy:
I dont like UEFI myself lol. I suppose I just have to get used to it.
Sorry to hear bout the board Zac:(Quote:
Originally Posted by Eldonko
Cpu is ok right?
What's the most stable bois right now. Board shipped with F2. I read that F3 still has some issues. Should I go with F3h?
Also, any word on how F4a is?
Thanks
CPU is good :)Quote:
Originally Posted by Dumo
I'm still awaiting my B3, but if it does die i'll just trash it and buy a Z68 motherboard. I hope Gigabyte continue to support the P67. I'll be extremely annoyed if they drop support only after a few months.
use F3h mate dont use new onesQuote:
Originally Posted by Devil_Dog
5100 HT 2133 C7 on my same 5000 HT 2133 C7 stable prime
LOAD 1,428 IDLE 1.464
http://img821.imageshack.us/img821/5296/5100a.jpg
Cheers
Sergio