yes mate, but stick to F10b bios if you can, inmo the bestQuote:
Originally Posted by ACK
yes mate, but stick to F10b bios if you can, inmo the bestQuote:
Originally Posted by ACK
too late!!:(Quote:
Originally Posted by andressergio
I've udated to F10i and pcie link width drop to 2x
http://s4.subirimagenes.com/otros/3625324linkwdth2x.jpg
I'm scared :shocked:
After that i replace cpu-z to the last version (see pic)
and update nvidia drivers to the last version too, but no success
Can I come back to f10b?
I had previous f9
dont worry mate...Quote:
Originally Posted by ACK
if it don't let you do it on Qflash just use FLASHSPI on DOS with a bootable pen drive and go back to F10b
Cheers
Sergio
nice, just flashed to f10i everything good still no problems, quick boot thing is nice
you will not have problems for sure but did you test your scores before and after ?Quote:
Originally Posted by redrumy3
btw what is quick boot thing ?
cheers
Sergio
andressergio is 10b best for the gigabut?
yes mate nice and fast bios :up:Quote:
Originally Posted by zsamz_
Mine still shows x16 link width but oddly doesnt show anything else. :shrug: Quick boot feature allows you to boot quicker, :) about 4-5 seconds faster when enabled on mine.
http://i131.photobucket.com/albums/p...281/biisdg.jpg
reboot time
http://i131.photobucket.com/albums/p...ss281/boot.jpg
I think this BIOS F10b still have problem in Windows 32-bit, reading memory(2x2GB) 3.25 GB instead of 3.5 GB,old AHCI ROM 1.07.Quote:
Originally Posted by andressergio
Yes hoss same here, cpuz shows the same
my reboot time is longer as im on raid 0 2x500 seagates 7200.11 and dual boot slows a bit but i get 9 seconds less :D
http://img4.imageshack.us/img4/3382/biosf10i.jpg
Cheeeeez :up:
Sergio
stasio, didnt know but on 64 bits works as a charm, tough im testing this new one and confirm that mem scores higher latency and bandw but well...Quote:
Originally Posted by stasio
Ran bios 10i here but all it does is basically "hide" the dos dmi pooling screen, its not really quicker.
you can't see bios/mb info on mainboard tab in cpuz
ram latencies here were about 82.5
Went back to 10f and all good, can see bios info in mainboard tab now on cpuz and ram latencies are 64.4
BUT I can't run Gpuz it crashes error.
i did get newest nvidia drivers so that may be Gpuz issue with them.
no problems here mate with GPUZ neither with new 195.62 drivers bios just fine and yes its faster...10 - 9 seconds on my system less to boot, yes latencies are a bit more but its not new cauz since F10e they've been doing this, i could get more OC on 8,5 multi as maybe they modified timmings on chipset..Quote:
Originally Posted by tyreman
Cheers :up:
Sergio
Andressergio...You using to 10b?
i was now testing F10i seems nice all my OC works as a charm, faster to boot, just using the PC as always no problems at all.Quote:
Originally Posted by tyreman
Why you ask ?
Cheeezzz!!
Sergio
I think at one time you using 10b.
+1 :up:, ran a quick prime test last night with F10I and so far so good. No real surprises other than no MB info in cpuz and maybe a glitch in memset since it now displays ram size just as 2048 instead of 2x2048.Quote:
Originally Posted by andressergio
http://i131.photobucket.com/albums/p...ss281/4625.jpg
I'm eyeing-up a v1.6 board at the moment, I could go for a 1.1 too, are either better than the other?
jojo !!! kick ass run Hoss congrats :up:Quote:
Originally Posted by Hoss331
yes mate i was using in till yesterday but think i will stay on this bios, seems nice, hope giga keeps improving this great board :up:Quote:
Originally Posted by tyreman
Anyone have a spare i/o shield for the EP45-UD3R or UD3P they would let me have or sell me for $5/shipped? Please PM me. I need one ASAP.
Soo hows the s775 life been treatin u all? Andre, Hoss, 007, radaja, etc? I miss u guys, yall need to step on up!! Just for comparison, i haven't tried anything under 4200mhz with the i7, but at 4200, i'm crushing all my benchies with the ud3p and q9650 @ 4.5 8GBgskill1200. I hesitated for a while before i jumped in, but i can say its 100% worth it. SLI and Xfire with the same board? Thats good stuff! SLI without nForce..Thats good stuff! I picked up one of these, new in box, from a junkie for cheap ($600) and played around with it. I changed the power supply and added a TRUE and was at 4200 Stable in 30 minutes with the factory 9gb of ddr3 running it at 1600. This bargain ASUS was killing my water cooled q9650. I sold the 9650 rig and went all out on a new i7 rig (in my sig) and i'm loving it. My new Gigabyte ex58a UD7 will be here Tuesday so maybe i'll run in to some of yall in the Gigabyte EX58 thread. If your not in there, i recommend coming as soon as you can! Sell that s775 Monster while you still can and step it up! lol STEP it UP!! :rofl: Andre your single 285 is getting lonely. Wouldn't it be nice to add 1, 2 or even 3 more 285's to your machine? You can do it if you step up!! lol :ROTF::yepp::ROTF:
He can run SLI just fine on the UD3P ;)
It isn't so much about the scores on the 775/DDR2/Quad stuff...it is all about the fun and tweaking ;)
How can he run SLI? MultiGPU cards dont count :p: The "fun and tweaking" applies to the i7's as well :yepp:....plus they're much faster!! but who cares about speed right? :DQuote:
Originally Posted by tool_462
Check post #4991 for SLI :up: