this is even better mate grats !!!Quote:
Originally Posted by Dumo
Printable View
this is even better mate grats !!!Quote:
Originally Posted by Dumo
Quote:
Originally Posted by hersounds
very nice hersounds seems u having fun with your chip did you changed the tim ?
indeed the 920 is even betterQuote:
Originally Posted by Dumo
yes buddy i change for cool laboratory Liquid Pro , now chip run much coldQuote:
Originally Posted by andressergio
Not bad!
3226B987
http://www.firegoon.com/images/s6nqx9r.jpg
CRAZY CHIP u got there... Sell it to me, plz :pQuote:
Originally Posted by Dumo
I had the exact same batch as DUMO the 3226B939 but I can not hit 5ghz without upping the volts to 1.52. The memory has been a problem to that It wont stick to the 2400 (1200) IMC without the high voltage.
http://i212.photobucket.com/albums/c...939cropped.jpg
I have high voltage but my temps are staying in low 70s when under load. Is this ok. or should I keep on looking for that golden chip.
Welcome to XS Fezzik:up:
Pic is hard to see. Can you post slightly bigger pic?
amazing low volts mate !!!Quote:
Originally Posted by Dumo
great Fez !!!Quote:
Originally Posted by Fezzik
you already know the story some chips eat more volts than other specially the exponenital voltage curve from 4,8 to 5 on IVY
mine needs 1,35 for 4,8HT and 1,488 5HT
Batch 3204B958
http://minidriven.com/BlacknBlueforI...i53570kIHS.jpg
Added some Fujipoly Extreme thermal pad around die (.5mm) for support and to help cool. It's the best performance I have had so far.
http://www.xtremesystems.org/forums/...1&d=1351239711
No IHS. Direct contact between die and DT Sniper water block.
Mounted
http://minidriven.com/BlacknBlueforI...mOUNT3570k.jpg
using a EK TRUE 115X back plate for stability.
http://minidriven.com/BlacknBlueforI...teDTSNIPER.jpg
Ambient Temps 18.6C
IBT quick and dirty standard run
5GHZ@1.37v
http://valid.canardpc.com/show_oc.php?id=2578924
http://minidriven.com/BlacknBlueforI...BTSTANDARD.jpg
Idle Temps
21C 24C 21C 18C
Maximum Temps
62C 70C 67C 62C
Edited my post and cropped the images so you can see it betterQuote:
Originally Posted by Dumo
http://i212.photobucket.com/albums/c...939cropped.jpg
Fezzik
I think is that much vcore try to slow down!
I actually got it down to 1.44 volts. I didnt have have my LLC cranked up. I think I'm going to try a different chip. I was pretty excited cause I got the exact same batch as DUMO, but another chip we go
Got a couple 3226C840 from local Micro Center...testing now
Waiting that Dumo
Quote:
Originally Posted by Dumo
Cool. My local MC in Tustin, California is all out of stock and I'm expecting a new batch soon. I am thinking about upgrading to new batch of 3770k from my early batch of 3570k.
Found a sweet spot for 24/7 5ghz.
Ambient Temps 24C
RAM 2133mhz CL 9-11-10-27 1T @1.5v
3570k@5ghz with 1.376v
http://valid.canardpc.com/2585171
http://minidriven.com/BlacknBlueforI...47lowv5ghz.jpg
Coud not have been possible without delidding. :)
Batch#: 3226C190 with Noctua DH-14
1.216 V
http://i50.tinypic.com/2z5tc36.jpg
Well I delidded my 3rd 3770k now. A 3226. I got it stable at 1.44 volts at 5ghz but I can only run my G.skill 2400 ram at 1800 and only 16gb instead of the 32. Any ideas on to help get the 32 going. If I have all 32 in I wont even post I get a asus MB code of 55 which means no ram installed.
Up vccio and sa...
..but don't go more that 1.30 VCCSA / VCCIO if you don't want faster degradation
Here are my voltages.
BCLK FReq 100.1
CPU VOLTS 1.45
DDR Volts 1.665
VCCSA =1.2
VCCIO 1.225
PLL 1.85
PCH 1.20625
VTTDDR 0.85625
2nd VICCIO 1.2250
well i increassed vccsa and IO to 1.3 and still no go. Not worried about speed as long as at 1600 but would like to use all 32 gigs. Any other suggestions?