So you wanted the ultimate Vdimm control...here it is!!!

Holy crap that's a massive list of vDimm. I think it would certainly benefit from keyed-entry (much like how FSB is entered in manually in current DFI bioses).

Thanks for the guide on Drive Strengths Tony :)

Vdimm in such small increments only makes sense if the votages are dead-on.

Is they are, thats board must be the 939 MOTHER-LORD!

Quote:

---

Originally Posted by kimandsally

Tony does this work for all the DFI boards Expert in particular? ( obviously I know the Expert doesn't have that many options but I mean does it work the same way?)
I have a strange situation in that I've had a SLI-D and now an Expert and neither have been picky with the OCZ Rev2 TCCD or my G Skill HZ (sorry for swearing)
I have been able to run and various Drive and Data strength without issues, could this be that I'm not pushing it enough or am I very lucky?

Also same for T Ref values I can use about half of them with out any problems, currently running my Opteron @280x10 passes prime for 12+hours at various settings but if I go for 285X10 all hell brakes loose nothing I try makes it stable.

Sorry for crashing this thread but I've never seen any reference to drive strengths before.

---

This is for CFX3200 only, eXpert has 1 to 15 with 9 to 15 being for 4 dimms 2T and 4 dmms 1T at the highest value.

Quote:

---

Originally Posted by jrw

Vdimm in such small increments only makes sense if the votages are dead-on.

Is they are, thats board must be the 939 MOTHER-LORD!

---

If the voltage options do change the vdimm slightly on each step then it suits me just fine, dead on is no issue to me as long as each option is close thats all i need.

that Drive Strength list impressed me! That is enormous choice. Will really help out the fine tuning.

Good work oskar.

Very nice, I look forward to the 975 board.

Oh my, looks like that's gonna definately be my next board for sure.

Quote:

---

Originally Posted by metro.cl

thats a lot of options, for a soon to be dead platform

---

Soon to be dead platform... 939 is not going anyway anytime soon silly nuts.

~Mike

Should i wait for conroe or get this board for my FX60?

Quote:

---

Originally Posted by Bootsy

Should i wait for conroe or get this board for my FX60?

---

Could be a great product, just wait long enough to get past the hype...

Quote:

---

Originally Posted by metro.cl

thats a lot of options, for a soon to be dead platform

---

True, but you can bet we'll see these options in newer socket boards :D

OMG! That is all I have to say on that...I know what my next motherboard is going to be!

Quote:

---

Originally Posted by Tony

http://homepage.ntlworld.com/a.leach...%20CFX3200.JPG

---

i'm not well versed in how exactly the drive strength is set with the K8's memory controller, but instead of having high drive strength to seeming infinity, wouldn't it be wiser to have around the same range the expert/venus have, but in smaller steps? :toast:

Ignoring the capacity (256MB, 512MB, 1GB DIMMS, whatever), which type of ICs would be the best suited ones for this board?

1. BH/CH-5
2. TCCD
3. Micron
4. Infineon
5. Hynix
6. UCCD

etc..

I have new bios if you need.:)

Quote:

---

Originally Posted by arisythila

Soon to be dead platform... 939 is not going anyway anytime soon silly nuts.

~Mike

---

Amd already saud s754 will outlast s939 plus in 2 months you'll be able to buy am2...

is a good thing for the future mobos

huh....

I hope they release this thing soon. I plan on grabbing one and a Crossfire card at the same time.

As if I wasn't having enough problems with 4 and 8 levels of drive strength...

The things these programmers come up with. Someone's gotta tell them to create a program that OCs your computer to the maximum stable OC in 48 hours. Now thats something for us lazy people who don't want to tweak 999 settings..

But what am I saying. I am an overclocker..

I am with malficar on this one...I plan as well to grab this motherboard and a Master 1900 card as well.

Voltages so close, only dogs can tell the difference.

Can you put a scope on the Vdimm and Vtt signals on this board to see if the dreaded DROOP exists as it does on SLI-DR/SLI-D/ULTRA-D boards?

Andre

I have 0307 off Oskar, do you have later?

Its actually dated 04/06/2006

long are the days of 2 dimm settings, now we got 200

edit: ma bad! :fight: 200 just for vdimm

u ocz guys and oskar u guys are nuts

wats next?

WHATS NEXT?

Getting a motherboard that supports 8 Video cards, 4 Quad Core CPUs, and 20GB of RAM! Overclock all of that!

Give it time...I am sure it is down the road somewhere lol...I am just dreaming...