New RAM List!!! (now with 1GB stick listing too)

awesome work, two thumbs up

Quote:

---

Originally Posted by Eljefe62

For explanation of Winbond UTT, see the "Xtreme Twinmos Memory" thread...

---

So is that BH-4(CH-4?) Infineon makes on Winbond's fab now?

Here are two additions to your list of probable UTT...both these 512MB sticks have hit 255 on a 3.2 P4 with 3.6v (by Diablo23rd at OC Forums). The first is OCZ PC2700 Value Series, the other is KVR PC3200. The OCZ has the M.tec labeled chips, the KVR is Kingston relabeled.

What about OCZ 3700 el Platinum arent the TCCD chips as well??

Quote:

---

Originally Posted by Gaspar

What about OCZ 3700 el Platinum arent the TCCD chips as well??

---

Yes, cherry picked tccd on Brainpower pcb i think. Apparently they like a bit of voltage too. Discussed here - http://xtremesystems.org/forums/show...082#post598082

Cheers, dEl. :toast:

I have some enroute to play with hopefully I can hit 300 HTT. :) :banana:

quality list man.

one alteration - Mushkin level 1 pc3200 2-3-2 is sometimes mosel vitelic chips

:D Well done - very important for all - keep it updated and make it a sticky !!!

So I'm happy getting my 2 x 256 G.SKILL 4800LA next week...........

:toast:

i have a correction:
corsair XMS3200C2 v1.1 is rated at 2-2-2-6-1T, not 2-3-3-6-1T ;)

New Centon's are on BrainPower PCB. They can hit 300HTT 1:1 easily with the right CPU and motherboard.... here's a snippet

http://centon.infopop.cc/evefiles/ph...C571C353E8.JPG

List Updated.

Quote:

---

Originally Posted by blinky

i have a correction:
corsair XMS3200C2 v1.1 is rated at 2-2-2-6-1T, not 2-3-3-6-1T

---

Nope. Both v1.1 and v2.1 are rated at 2-3-3-6-1T ;).

Anyway it isn't written anything in the label but I have seen it from a link taken in the official site.

what do you guys think, would i be beter off buying mushkin pc3500 2-3-3-5 which is ch-5, or should i get some twinmos UTT?

edit: i'll just gamble on UTT.

Very nice work with the list. :toast:

i think ocz pc3700EL platinum and pc4200EL platinum are also TCCD wif brainpower pcb. can anyone confirm this?

how about these? G.SKILL PC4400(DDR550) 2.5-3-3-7, PC3200 2-2-2-5 1GB Kit (F1-3200DSU2-1GBLE)

Quote:

---

Originally Posted by Skip

what do you guys think, would i be beter off buying mushkin pc3500 2-3-3-5 which is ch-5, or should i get some twinmos UTT?

edit: i'll just gamble on UTT.

---

UTT > CH-5.

wow
amazing list and very useful

Quote:

---

Originally Posted by Punisher!

Winbond UTT vs TCCD (indicative comparison, not scientific):

• Low Timings 2-2-2-X:
  Winbond UTT (265-270 Mhz 1T @ ~3,4V) > TCCD (235-240 Mhz 1T @ ~2,85V)
• Medium Timings 2,5-3-3-X:
  TCCD (~300 Mhz 1T @ 2,85V) > Winbond UTT (270-275 Mhz 1T @ 3,4V)
• High Timings 3-4-4-X:
  TCCD (+300 Mhz 1T/2T @ ~2,85V) > Winbond UTT (275-280 Mhz ~1T/2T @ 3,4V)
• Consumption (max = at which voltage they give their max):
  TCCD: ~2,85V (max)
  Winbond UTT: +3,4V (max unknown)

---

so if want xtreme high FSB choise TCCD ,choise UTT for xtreme Low Latency
:banana:

Adata 566 and adata 600 are TCCD and Hinyx, so they are not TCCD sure.

Quote:

---

Originally Posted by BeSaiD

Adata 566 and adata 600 are TCCD and Hinyx, so they are not TCCD sure.

---

NOPE. A-Data 566 and 600 ARE TCCD SURE @ 100%.

Not bad for my first post, mh? :p:

Up for "standing"! :D

Quote:

---

Originally Posted by Onepagebook

how long you did this list?:D
You've done a great job! :toast:

---

Ditto that...

Up!

i´m :slobber:

all i can say is.. keep up the good work.

Very nice post... i think it should by voted for sticky :)

yea! sticky this one!