Project White

Thanks Oranuro

Here is Update 10

My first set of copper pipes are ready.^^
And they fit perfect i also placed the PSU on its place to loot at the cable management.
Here are some pictures.

I placed the old Motherboard on the tray so i can place my HD 6970 to fit the pipes.
http://i1187.photobucket.com/albums/...e/SDC10658.jpg
Taking care of the HD 6970 so i can place the water block on it.
http://i1187.photobucket.com/albums/...e/SDC10659.jpg
http://i1187.photobucket.com/albums/...e/SDC10662.jpg
When i removed the stock cooler is saw this on the power connector.
http://i1187.photobucket.com/albums/...e/SDC10661.jpg
http://i1187.photobucket.com/albums/...e/SDC10665.jpg
http://i1187.photobucket.com/albums/...e/SDC10666.jpg
The first 2 pipes are ready :p
http://i1187.photobucket.com/albums/...e/SDC10667.jpg
http://i1187.photobucket.com/albums/...e/SDC10668.jpg
http://i1187.photobucket.com/albums/...e/SDC10669.jpg
http://i1187.photobucket.com/albums/...e/SDC10670.jpg
http://i1187.photobucket.com/albums/...e/SDC10671.jpg
http://i1187.photobucket.com/albums/...e/SDC10672.jpg
Then i also checked for the power cables and it looks pretty good.
http://i1187.photobucket.com/albums/...e/SDC10673.jpg
Now i need to wait for my order from Highflow so i can finish my loop with copper pipes.


Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

Very nice work! I like this a lot.

This is going to look fantastic.

I think this is going to be a nice looking TJ07 with those modded case parts and those copper tubes.

Thx guys ^^

Update 11

This week and weekend i finished of some pieces.
The Mid plate, bay holders and a extra plate on the back of the motherboard tray for cable management
I didn't take a lot of pictures of all the work because my GF had taken the camera to go to the sea with here Friend
So u only get the end result of it
Here are the finished bay holders
http://i1187.photobucket.com/albums/...e/SDC10691.jpg
http://i1187.photobucket.com/albums/...e/SDC10693.jpg
http://i1187.photobucket.com/albums/...e/SDC10692.jpg
Completed the mid plate
http://i1187.photobucket.com/albums/...e/SDC10680.jpg
http://i1187.photobucket.com/albums/...e/SDC10681.jpg
Made a hole so that the fan of the HDD can pull some fresh air from the button of the case
http://i1187.photobucket.com/albums/...e/SDC10056.jpg
http://i1187.photobucket.com/albums/...e/SDC10057.jpg
then a made a extra plate for my cable management behind the motherboard tray to keep all the cables at there places.
http://i1187.photobucket.com/albums/...e/SDC10046.jpg
http://i1187.photobucket.com/albums/...e/SDC10047.jpg
http://i1187.photobucket.com/albums/...e/SDC10059.jpg
http://i1187.photobucket.com/albums/...e/SDC10058.jpg
made mounting holes for the rad mount and placed everything back together
http://i1187.photobucket.com/albums/...e/SDC10686.jpg
http://i1187.photobucket.com/albums/...e/SDC10050.jpg
http://i1187.photobucket.com/albums/...e/SDC10052.jpg
http://i1187.photobucket.com/albums/...e/SDC10053.jpg
The black fans will be changed with white fans from silverstone.
http://i1187.photobucket.com/albums/...e/SDC10054.jpg
http://i1187.photobucket.com/albums/...e/SDC10055.jpg
http://i1187.photobucket.com/albums/...e/SDC10048.jpg
http://i1187.photobucket.com/albums/...e/SDC10049.jpg
A few more thing i can do when that is finished i will have to wait for my order.
Common Aqua Computer speed up the production :p

Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

It really looks amazing!
Are you going to paint the copper tubes?

Epic TJ build. I like copper tubes a lot.

any chance of painting the copper tube white? awesome build, sir.

Quote:

---

Originally Posted by Sealarn

It really looks amazing!
Are you going to paint the copper tubes?

---

Quote:

---

Originally Posted by supernothing

any chance of painting the copper tube white? awesome build, sir.

---

Thanks the copper pipes will get a coat of nickel so it matches with the rest of my work.

Quote:

---

Originally Posted by skeyo

Epic TJ build. I like copper tubes a lot.

---

Thanks man

Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

This is awesome. Keep going ;)

I love this, it is all kinds of sexy man!

Quote:

---

Originally Posted by Blu3berrX

This is awesome. Keep going ;)

---

Quote:

---

Originally Posted by Wookie Man

I love this, it is all kinds of sexy man!

---

Thanks guys ^^

Hardware Update :p

Today they mail man came with a new package from Highflow^^
I show u guys what was in the box.
http://i1187.photobucket.com/albums/...e/SDC10065.jpg
What did i get.
5 Silverstone 120MM FM121 Silver Controller 2400RPM
http://i1187.photobucket.com/albums/...e/SDC10068.jpg
1 Koolance CPU-370
http://i1187.photobucket.com/albums/...e/SDC10069.jpg
http://i1187.photobucket.com/albums/...e/SDC10071.jpg
http://i1187.photobucket.com/albums/...e/SDC10072.jpg
1 Aqua-Computer (electronic) Flow Meter (spijtig dat die niet in het wit is zal hier nog iets op moeten vinden.)
http://i1187.photobucket.com/albums/...e/SDC10078.jpg
Then also some fittings rubber sealings power connectors temp meter
http://i1187.photobucket.com/albums/...e/SDC10067.jpg
And also a
Aqua-Computer Aquaero 5 XT USB fan controller, graphic LCD, touch control, IR
http://i1187.photobucket.com/albums/...e/SDC10073.jpg
http://i1187.photobucket.com/albums/...e/SDC10074.jpg
http://i1187.photobucket.com/albums/...e/SDC10076.jpg
http://i1187.photobucket.com/albums/...e/SDC10077.jpg
And i got some new bolt to put everything together
http://i1187.photobucket.com/albums/...e/SDC10066.jpg
Now i can start with the pump and flow meter mounting plate Still need to draws and make it.
But there are allot of other thing to do now also with my parts

Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

why didn't you go with a hale90 power supply instead of the 850 hx? lol hale90 is white XD

Quote:

---

Originally Posted by mojosephwu

why didn't you go with a hale90 power supply instead of the 850 hx? lol hale90 is white XD

---

prefer Corsair over NZXT


Update 12
After a few days of playing with the Aquaero XT5 it is time to put my attention back on the case.
this weekend i have made the pump stand.
I couldn't really find a good design for it. I also wanted to make sure that the vibration from the pump wont go on to the case.
Here some pictures of the stands
Few weeks ago i bought these rubbers for the vibration. (first pictures are black and white GF borrowed the cam :s)
http://i1187.photobucket.com/albums/...e/SDC10087.jpg
First time i bended the plexiglass so i tried on a spare piece.
http://i1187.photobucket.com/albums/...e/SDC10086.jpg
http://i1187.photobucket.com/albums/...e/SDC10085.jpg
It went well so i started with the good parts.
I made 2 different stand to see what would be best fitted.
Stand 1
http://i1187.photobucket.com/albums/...e/SDC10091.jpg
http://i1187.photobucket.com/albums/...e/SDC10090.jpg
http://i1187.photobucket.com/albums/...e/SDC10095.jpg
http://i1187.photobucket.com/albums/...e/SDC10096.jpg
http://i1187.photobucket.com/albums/...e/SDC10098.jpg
http://i1187.photobucket.com/albums/...e/SDC10099.jpg
Stand 2
http://i1187.photobucket.com/albums/...e/SDC10092.jpg
http://i1187.photobucket.com/albums/...e/SDC10093.jpg
http://i1187.photobucket.com/albums/...e/SDC10094.jpg
http://i1187.photobucket.com/albums/...e/SDC10100.jpg
http://i1187.photobucket.com/albums/...e/SDC10102.jpg
http://i1187.photobucket.com/albums/...e/SDC10103.jpg
Tested them in the case to see what would fit the best.
http://i1187.photobucket.com/albums/...e/SDC10106.jpg
http://i1187.photobucket.com/albums/...e/SDC10104.jpg
http://i1187.photobucket.com/albums/...e/SDC10107.jpg
http://i1187.photobucket.com/albums/...e/SDC10108.jpg
Tbh i prefer the stand 1 even that it doesn't have the same features as the case parts.
Well maybe a make a other 1 if cant get out of it.
also did a very small mid on the silverstone fans
http://i1187.photobucket.com/albums/...e/SDC10112.jpg
And i did the power cables of the fans also to connect to the Aquaero
http://i1187.photobucket.com/albums/...e/SDC10113.jpg
http://i1187.photobucket.com/albums/...e/SDC10110.jpg
Just need to make a cover for the back of it else u will see the mes with the wires
http://i1187.photobucket.com/albums/...e/SDC10115.jpg
Tonight i will brake my pc off so i can send my motherboard to the shop so i can get the B3 version of it.
Lol i almost forgot to show u my first idea :p of the pump stand
http://i1187.photobucket.com/albums/...e/SDC10117.jpg
http://i1187.photobucket.com/albums/...e/SDC10118.jpg
http://i1187.photobucket.com/albums/...e/SDC10119.jpg
Good that i didn't go further on that idea it really looks bad after the other one's

Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

This night i tried a other design for my pump stand.
I combined the first 2 designs and make 1 piece is it ^^
Drawing it on my last piece of plexi glass so it have to be right.
http://i1187.photobucket.com/albums/...e/SDC10120.jpg
http://i1187.photobucket.com/albums/...e/SDC10122.jpg
http://i1187.photobucket.com/albums/...e/SDC10125.jpg
http://i1187.photobucket.com/albums/...e/SDC10123.jpg
http://i1187.photobucket.com/albums/...e/SDC10124.jpg
placed the pump on the stand
http://i1187.photobucket.com/albums/...e/SDC10126.jpg
http://i1187.photobucket.com/albums/...e/SDC10127.jpg
http://i1187.photobucket.com/albums/...e/SDC10128.jpg
http://i1187.photobucket.com/albums/...e/SDC10130.jpg
http://i1187.photobucket.com/albums/...e/SDC10129.jpg
This is it ^^

Sponsored by Highflow
http://i1187.photobucket.com/albums/...n-s/header.png

Completed Builds
Project Umbrella
Black Obsession

absolutely amazing...i wanted copper tubing for so long before but didnt have the resources to make it happen..looks great cant wait to see it with the nickel finish.

Those pump mounts are so simple, yet look so good, I bet you could sell those for way more than material cost :up:

+1 to miahallen. Yes, with skills like this, imho you can get up there alongside (UN)design, iandh and murdermods if you ever wish so :)

Quote:

---

Originally Posted by InCredible

absolutely amazing...i wanted copper tubing for so long before but didnt have the resources to make it happen..looks great cant wait to see it with the nickel finish.

---

me also ^^

Quote:

---

Originally Posted by miahallen

Those pump mounts are so simple, yet look so good, I bet you could sell those for way more than material cost :up:

---

Haha who knows i probably give them away have no use of them

Quote:

---

Originally Posted by churchy

+1 to miahallen. Yes, with skills like this, imho you can get up there alongside (UN)design, iandh and murdermods if you ever wish so :)

---

Thanks Man ^^

Amazing work....

There is much forward-thinking in this design and when you are done...you will have a work of Art! :yepp:

Quote:

---

Originally Posted by nismosd

Amazing work....

---

Thanks ^^

Quote:

---

Originally Posted by audioave10

There is much forward-thinking in this design and when you are done...you will have a work of Art! :yepp:

---

Well i am hoping the same that it would turn out like a piece of art :p

Quote:

---

Originally Posted by Snelleedie

http://i1187.photobucket.com/albums/...e/SDC10098.jpg

---

Looks like a turret! :rofl:
Nice job, very creative! :up:

More one that loves the pump stand.. but are you using 2 pumps together?

Seems like a 655 with a 350

Keep on this good modding:up:

Quote:

---

Originally Posted by zalbard

Looks like a turret! :rofl:
Nice job, very creative! :up:

---

Yea i had that a lot ^^

Quote:

---

Originally Posted by Raiden

More one that loves the pump stand.. but are you using 2 pumps together?

Seems like a 655 with a 350

Keep on this good modding:up:

---

Its a 655 with a Aqua Computer Flow meter on it ^^

Small preview
http://i1187.photobucket.com/albums/...e/SDC10189.jpg
:D