ASUS Maximus III Formula Full Board block development

Printable View

Show 100 post(s) from this thread on one page

11-25-2009, 12:50 AM
Metric

Very nice looking Eddy. I find that the more angular look on the new revised southbridge end matches much better style-wise with the MOSFETs :)
11-25-2009, 02:28 AM
ggdh

Quote:

Originally Posted by Eddy_EK

He he, nothing for the MSI.

It's a pity.

Quote:

Originally Posted by Eddy_EK

I think you are pretty lonely about this wish

I would not be that sure :) There's a bunch of people out there ready to empty their pockets for that.
11-25-2009, 03:01 AM
rampton

that looks good.

i've got the koolance one fitted at the minute and the bolts are a little high. in the top slot, the video card won't latch properly because it looks like it's sitting on the bolts. i had to use a lower slot. your bolts look lower. it would also save a ton of pipework over the vr's. i have 2 mvr-40's with 1/2" tubing and it's kinda busy.

if it clears the top slot to allow proper fitting and latching of a card, i'd probably buy one and remove my koolance and the mvr-40's.

if you could integrate or fix the standoffs someway that would be awesome. from memory, i think the koolance ones are part of the block. the standoffs on your fc block for the gainward gs 260 896M are horrible. fyi: it also doesn't fit properly despite you assuring me it would. the black alloy panel on the right side doesn't clear a big fat cube component top right corner. i had to file the corner off it to clear before it would bolt flat to the main block. i also couldn't fit the horrible standoffs underneath it either because they warped the card if i did.
11-25-2009, 03:15 AM
psmawson

Eddy, Could you not move the bridge that connects the top and bottom halfs of the block so that its in the same place as on the classified block there for allowing the use of a full legnth card in the pcie x1 :D
11-25-2009, 04:50 AM
Eddy_EK

Quote:

Originally Posted by rampton

that looks good.

i've got the koolance one fitted at the minute and the bolts are a little high. in the top slot, the video card won't latch properly because it looks like it's sitting on the bolts. i had to use a lower slot. your bolts look lower. it would also save a ton of pipework over the vr's. i have 2 mvr-40's with 1/2" tubing and it's kinda busy.

if it clears the top slot to allow proper fitting and latching of a card, i'd probably buy one and remove my koolance and the mvr-40's.

if you could integrate or fix the standoffs someway that would be awesome. from memory, i think the koolance ones are part of the block. the standoffs on your fc block for the gainward gs 260 896M are horrible. fyi: it also doesn't fit properly despite you assuring me it would. the black alloy panel on the right side doesn't clear a big fat cube component top right corner. i had to file the corner off it to clear before it would bolt flat to the main block. i also couldn't fit the horrible standoffs underneath it either because they warped the card if i did.

Please send this info with pictures to our support. This is the only possibility we get the feedback and make corrections. I would appreciate it.
11-25-2009, 04:53 AM
Eddy_EK

Quote:

Originally Posted by psmawson

Eddy, Could you not move the bridge that connects the top and bottom halfs of the block so that its in the same place as on the classified block there for allowing the use of a full legnth card in the pcie x1 :D

This would cause total redesign of the block and also the sizes of the raw material we plan to use. But ill check for that possibility.
But there is one more slot free lower which could be used if the VGA card would be watercooled by single slot cooler.
11-25-2009, 05:23 AM
psmawson

Quote:

Originally Posted by Eddy_EK

This would cause total redesign of the block and also the sizes of the raw material we plan to use. But ill check for that possibility.
But there is one more slot free lower which could be used if the VGA card would be watercooled by single slot cooler.

All I was thinking is that you carnt single slot any of the new new ati 5000 due to the extra DVI :(
11-25-2009, 06:27 AM
Eddy_EK

Quote:

Originally Posted by psmawson

All I was thinking is that you carnt single slot any of the new new ati 5000 due to the extra DVI :(

Hm... this is true :S
11-25-2009, 10:19 AM
psmawson

Sorry Eddy didn't mean to put a downer on your block it looks great. :D
11-25-2009, 09:39 PM
Eddy_EK

Quote:

Originally Posted by 1nvisible

Saw some new block over Performance PCs, hot damn....
http://www.performance-pcs.com/catal...e7b144f47fcc45

I kept an eye out for the copper/acrylic EK X58 Classified but only saw the release of nickel plated, are you planning to do the same with this version?

Any future plans working with solid copper or copper/acrylic?

Got you...
I think we'll go also for copper acrylic version. If you wish for copper we can arrange one without nickel plating. This is the easy part.
The more problem making is that we would have to do something special which would make additional unique work for my workers or suppliers like nickel plating. ;)
11-25-2009, 10:28 PM
DarthBeavis

you make big sexytime explosion with your block
11-27-2009, 02:26 AM
JoeBar

Very nice job on the MIII block. :up:

The RE2 V2 is what V1 supposed to be...
11-30-2009, 07:11 AM
meanmoe

Very nice block. So the sound card will or will not fit the first x1 slot? The first post is confusing.

EVGA FTW is next right?

DB, lol...
11-30-2009, 07:57 AM
Eddy_EK

Quote:

Originally Posted by meanmoe

Very nice block. So the sound card will or will not fit the first x1 slot? The first post is confusing.

EVGA FTW is next right?

Yes, you can use the sound card that comes with the board.

EVGA FTW, you mean P55?
11-30-2009, 09:56 AM
BrokenArrow

I was fully intending to get this motherboard until all the talk about the burned CPU sockets being from Foxconn and not from Lotes. Any news if they have fixed this issue or not?

BTW, I will only buy a motherboard if EK has a motherbloack(s) block for it. Keep up the good work Eddy.
11-30-2009, 10:03 AM
millertime359

Quote:

Originally Posted by Eddy_EK

Yes, you can use the sound card that comes with the board.

EVGA FTW, you mean P55?

I don't see a need for a block for the EVGA P55 FTW board. The P55 chips stays plenty cool on its own. Not to mention it may be a bit tricky do a block see the GPU covers up most of the chip.

Some Mosfet blocks might be nice though. They do get a bit toasty under load. :)
11-30-2009, 11:56 AM
gmat

Quote:

Originally Posted by BrokenArrow

I will only buy a motherboard if EK has a motherbloack(s) block for it.

Ditto. Got an X58 Classified mainly because it has the full cover EK block.
And i suspect i'm not alone - Eddy should ask money to EVGA or something
11-30-2009, 01:19 PM
Laine

Hey, Eddy.
Since there are graphic cards being sold with your blocks mounted stock, why don't you talk to e.g. EVGA about mounting FC on their motherboards straight from the factory? Just a thought.

Amazing block btw! :up:
11-30-2009, 02:30 PM
BrokenArrow

Quote:

Originally Posted by millertime359

I don't see a need for a block for the EVGA P55 FTW board. The P55 chips stays plenty cool on its own. Not to mention it may be a bit tricky do a block see the GPU covers up most of the chip.

Some Mosfet blocks might be nice though. They do get a bit toasty under load. :)

Of course every spot on a motherboard needs watercooling :D.

After all, this site is "xtreme" is it not. :up:
12-05-2009, 04:25 PM
Malik

Eddy when this new block for R2E will be in shop ?
12-05-2009, 05:15 PM
Utnorris

Will the REII Rev. 2 block be available in nickel plating? Also, any plans for a Rampage Gene block?
12-06-2009, 01:43 AM
Eddy_EK

RE2 will be available on monday, also in nickel version.
12-06-2009, 11:33 PM
mjtir

:party:
12-15-2009, 09:51 AM
cristyjocker

maximus III

Hi Eddy,

What about the block for the Maximus III? when will it be avaible to buy?

bye ;)
12-15-2009, 10:06 AM
Eddy_EK

Quote:

Originally Posted by cristyjocker

Hi Eddy,

What about the block for the Maximus III? when will it be avaible to buy?

bye ;)

Next week we'll have them available.
Prototype was confirmed in the beginning of last week.

Show 100 post(s) from this thread on one page