Gentle Typhoon's AP-15 (1850 RPM)

Printable View

Show 100 post(s) from this thread on one page

08-21-2009, 09:14 PM
Armitage

Quote:

Originally Posted by SNiiPE_DoGG

krylon fusion when applied with care has a very durable finish on these blades, not too much color choice, but good solid paint hold

Did you use any primer when you did it SD? And how many coats did you apply. I realize it can't be too thick.
08-21-2009, 10:01 PM
Diverge

I think you's are kinda crazy spray painting fan blades.. but that's just me i guess :p:

If I was gonna try to change the color of them, i'd probably take them apart, and soak the blades in some dye. It would probably look a lot better (if the dye takes), keep the fan balanced (probably), and won't come off :)
08-21-2009, 10:06 PM
SNiiPE_DoGG

Quote:

Originally Posted by Armitage

Did you use any primer when you did it SD? And how many coats did you apply. I realize it can't be too thick.

like 3 no primer using that paint on plastic, IDK, I didnt see any change in fan noise or vibration but I guess you could call me an experienced painter... just be careful to be even.

Quote:

Originally Posted by Diverge

I think you's are kinda crazy spray painting fan blades.. but that's just me i guess :p:

If I was gonna try to change the color of them, i'd probably take them apart, and soak the blades in some dye. It would probably look a lot better (if the dye takes), keep the fan balanced (probably), and won't come off :)

RIT dye would probably work great, grey is easy enough to work with. I used to use the stuff to dye lacrosse sticks and it was nice but ruined the integrity of the plastic from a lacrosse standpoint - certainly you wont be slamming on people with the fan trying to induce as much bodily harm as possible tho

2/3-layer dying with a color a hotglue pattern mask or electric tape mask and then a black finish coat would look sick, in fact I think I will test it out on one of my currently busted fans (of my own doing).

EDIT:

heres a pic (example from google ;)) of what we would do with lax sticks:

http://www.rock-itpocket.com/images/...peck2color.jpg
08-22-2009, 04:53 AM
millertime359

Quote:

Originally Posted by Diverge

I think you's are kinda crazy spray painting fan blades.. but that's just me i guess :p:

If I was gonna try to change the color of them, i'd probably take them apart, and soak the blades in some dye. It would probably look a lot better (if the dye takes), keep the fan balanced (probably), and won't come off :)

If your not very good with a spray can like me. I would think that as long as you took your time and kept the coats light you would probably be ok as far as keeping the blades balanced. It would be when you got hurried and tried some heavy coats and got some runs that I think you would start to see issues. :shrug:

Quote:

Originally Posted by Waterlogged

You mean there are other colors besides black?:eek: :rofl:

I'm a subscriber to the old Henry Ford business model "sell them whatever color they want. . .as long as it's black". :D

:ROTF: :up:

But doesn't everything go with black. :p:
08-22-2009, 02:38 PM
dylskee

Quote:

Originally Posted by Diverge

I think you's are kinda crazy spray painting fan blades.. but that's just me i guess :p:

So let me get this right, you're ok with running hose through your computer full of water to cool thousands of dollars of hardware but don't put spray paint on a $15.00 fan?? ;)
08-22-2009, 03:11 PM
Armitage

I picked this up at home depot, think it'll work?

http://www.rustoleum.com/CBGProduct.asp?pid=118
08-22-2009, 03:36 PM
dylskee

Quote:

Originally Posted by Armitage

I picked this up at home depot, think it'll work?

http://www.rustoleum.com/CBGProduct.asp?pid=118

That should work fine. I just picked up This from Home Depot today.
And here's how they look so far.
http://img35.imageshack.us/img35/642...ure071j.th.jpg
08-22-2009, 03:49 PM
Armitage

Well the Krylon stuff at least says it's "Fusion". I'm no paint expert, which is why I'm curious if what I bought will work :)
08-22-2009, 03:59 PM
dylskee

Honestly you would probably be fine with any spray paint but if it's designed for plastic it will look a little better and hold to the plastic for a longer time. That paint is probably the same as the Krylon anyway. Give it a go and paint em up! :up:
08-22-2009, 05:59 PM
millertime359

Quote:

Originally Posted by dylskee

So let me get this right, you're ok with running hose through your computer full of water to cool thousands of dollars of hardware but don't put spray paint on a $15.00 fan?? ;)

We are crazy, but not nuts. ;)
08-22-2009, 06:07 PM
dylskee

Quote:

Originally Posted by millertime359

We are crazy, but not nuts. ;)

:rofl: There is a fine line but you're right!
08-22-2009, 07:19 PM
astrodanco

Quote:

Originally Posted by dylskee

So let me get this right, you're ok with running hose through your computer full of water to cool thousands of dollars of hardware but don't put spray paint on a $15.00 fan?? ;)

There is a difference between form and function. Some of us are obsessed with function while others are obsessed with form. Still others find a reasonable balance. Painting a fan is an obsession with form over function. Way off the deep end for sure. Seek help immediately. :D
08-22-2009, 07:26 PM
dylskee

Quote:

Originally Posted by astrodanco

There is a difference between form and function. Some of us are obsessed with function while others are obsessed with form. Still others find a reasonable balance. Painting a fan is an obsession with form over function. Way off the deep end for sure. Seek help immediately. :D

:rofl::rofl:
Wow man, that's deep but you're absolutely right! And my therapy is spending way too much money and spending way too much time on a build that I will break down and sell for an upgrade in 3 months anyway!!!!!! :D
08-22-2009, 08:47 PM
Diverge

Quote:

Originally Posted by dylskee

So let me get this right, you're ok with running hose through your computer full of water to cool thousands of dollars of hardware but don't put spray paint on a $15.00 fan?? ;)

I just think it's not the best way to go about changing the color (which I am fine with gray, a actually like them :p:). Cause I think over time paint will just look like :banana::banana::banana::banana: :p:
08-22-2009, 08:52 PM
Armitage

Quote:

Originally Posted by Diverge

I just think it's not the best way to go about changing the color (which I am fine with gray, a actually like them :p:). Cause I think over time paint will just look like :banana::banana::banana::banana: :p:

Hopefully with the right paint it doesn't. And if it does happen. It's only a loss of looks, and even then - buy some new ones for cheap.

edit* - cheap in comparison to the rest of whats in your computer :P
09-23-2010, 09:47 AM
jalyst

So these still the bad ass fans for rads if you want decent CFM, but not too noisy?
09-23-2010, 10:26 AM
millertime359

Quote:

Originally Posted by jalyst

So these still the bad ass fans for rads if you want decent CFM, but not too noisy?

:yepp:
09-23-2010, 10:45 AM
MagisD

Just there out of stock everywhere with no soild eta.

Sent from my X10a using Tapatalk
09-23-2010, 10:48 AM
jalyst

:banana::banana::banana::banana:e I hope you're wrong for Australia....
I just placed an order with a local retailer & it said they're not in stock...
I assumed that simply means they need to retrieve them from their central warehouse.
09-23-2010, 11:01 AM
millertime359

I haven't needed any for a while. That has been the biggest downfall of them. Production hasn't really been able to keep up with demand. :(
09-23-2010, 11:05 AM
jalyst

aw crap :( anyway i gotta get some sleep, 5am, thanks all
09-23-2010, 11:37 AM
rioja

Where to buy them, it is worldwide shortage now
09-23-2010, 12:57 PM
hillywav

Quote:

Originally Posted by rioja

Where to buy them, it is worldwide shortage now

yeah, i throw email to ppcs and they forward me reply from scythe that said, it will be avail next moth or something
http://img715.imageshack.us/img715/778/29283171.png

Uploaded with ImageShack.us
09-23-2010, 01:19 PM
eclypse

10 15s and 5 14s at this site.. I've ordered from them twice now and each time my order was shipped the same day. http://www.anartik.com/120mmfans.html
09-23-2010, 06:10 PM
juanP

Quote:

Originally Posted by gergregg

This post is just to say these fans rock! Very quiet even at full RPM on an RX360. I was running S-flex f's (1600 RPM) before and these are quieter to my ear by a good margin.

I'm going to have to change all of my case fans now.

If you are even considering these fans I would highly recommend. :up:

where did u buy these fans from. i could not find any?

Show 100 post(s) from this thread on one page