Radiator brackets and mounting tomorrow, got my Aluminium today. If I get time, I will cut the hole for the RadGrillz too.
Radiator brackets and mounting tomorrow, got my Aluminium today. If I get time, I will cut the hole for the RadGrillz too.
pics or ban. :up:
OK, so I didn't get around to the rad mounts today, as my Dremel decided to pack it in about half way through the work. They are all measured up and ready to cut though!
Here's what I did do today:
Measured up the rad hole in the case cover:
http://users.on.net/~statts/black/black024.jpg
Cut it out (hadn't been smoothed up yet):
http://users.on.net/~statts/black/black025.jpg
And put the ACRyan Radgrillz on:
http://users.on.net/~statts/black/black026.jpg
Note that I probably won't have room for mounting bolts and nuts for the Radgrillz, so I will be adhering it on.
Also, ignore the scratches made whilst cutting the hole. The case cover will be stripped pack and powdercoated when the chassis is :up:
Nice Work Statts!! :clap:
Sorry to hear about your Dremel, mine packed up on me last month..... somehow I dont think it was made to get thrown... lol :rolleyes:
I actually am currently lining up the Rad on mine (mine will be rows up from the bottom and 2 columns from the front of the case), waiting for my Grill tho before I cut, Im going to get hex head bolts in black and put it all the way through to the Rad.
one question, what are you doing with the rest of the vent holes??
Im going to be putting a plate on the inside and bog filling mine before getting painted.... Painted you ask??
heres a lil sneak preview of what she will look like...
Well, I am going to have a window on the top above the GPU/rad area so that will eliminate those two vent holes.Quote:
Originally Posted by gazmtk
You are painting yours a matte black but the looks? Should be good :up:
The bolting the grille through the case lid into the rad, how to you plan on taking the lid on and off again afterwards?
Ohh I meant the extra holes around your grill, sorry I should be more specific in future :(
If you look close its a Very dark grey with splashes of black in there, and it will probably be Satin, not Gloss and not Matte, neither of those two will do it justice...
and Ive played with it, providing I leave a little bit of extra tubing (5cm?? if I measured correct) I will have enough play to be able to unscrew the Rad and Grill and then leave the Rad hanging while I work inside..
OK, that sounds like a good idea. :up:Quote:
Originally Posted by gazmtk
Yeh, see we are helping eachother out here, your already further along then me, but because I am working on the exact same case we are sharing Ideas, and I am taking alot of lessons off yourself and Evil's build... so its a pleasure to give something back in return :up:
Im not gonna start a Build Log until I get everything I need in my hands, otherwise it will take too long :shakes:
OK, been a while since an update. Back at Uni now, so things may slow down a little unfortunately.
Anyway, received a little package in the mail today......
10x Bitspower 3/8" x 5/8" compression fittings:
http://users.on.net/~statts/black/black027.jpg
Mountings from a Scythe Hard Drive Stabilizer to mount my pump:
http://users.on.net/~statts/black/black028.jpg
iandh ramsinks for my 8800GT:
http://users.on.net/~statts/black/black029.jpg
Here's the compression fittings fitted to my pump (with Petra's top):
http://users.on.net/~statts/black/black030.jpg
And to my MCRES MICRO (yeah it's dirty, new one coming):
http://users.on.net/~statts/black/black031.jpg
And to my MCR220:
http://users.on.net/~statts/black/black032.jpg
Planning on making the radiator mounts tomorrow, see how I go, the Dremel is off under warranty return and I really REALLY need it back!
the compressions are looking good
we need more updates man, ive slowed
down too.. just dont have enough time
in the day... it sucks
yeah, never enough time! update again tomorrow (i hope)
that's too bad that asus mobo didnt fit. it's such a great mATX mobo! what did you do with it afterwards? wanna sell it? :D and that gigabyte mobo is deactivated on newegg, so where did you buy it and how much? i'm also looking for a high end, good clocking mATX and it seems asus was the only one. i'm currently waiting for DFI to release the only mATX mobo with p45 chipset. this would be perfect for you also for high OC'ing black PCB for your theme, and PCI-e slot on the first slot!
Looking fab. I really do like this case and it's great we have a couple of build logs.
I am in Australia, and there were still a few units floating around at the distributor. This board should clock as well as the Asus, I just wish it was black like the Asus.Quote:
Originally Posted by WhiteFireDragon
DFI boards look good from all reports. Interesting about the PCIE placement, maybe when upgrade time comes....
Yeah I love this little case, just wish I had more time to work on it!Quote:
Originally Posted by MomijiTMO
Christ, did you buy this before or after it became available?
I hope it is the later although I do know of someone who bought one a few months ago =p
Buy what? The case? I purchased it about 3 weeks agoQuote:
Originally Posted by MomijiTMO
Well, has been AAAAGES since my last update. Have been run off my feet with Uni work. Aim is to have this project done in the mid-semester break. Fingers crossed.
Got some more parts arrived, see pics below. Just waiting on some Bitspower rotary 90's and 45's and the loop is ready to go together.
Tygon R-3400 3/8" x 1/2" tubing in BLACK:
http://users.on.net/~statts/black/black034.jpg
DTEK FuZion GFX 2:
http://users.on.net/~statts/black/black036.jpg
With Bitspower 3/8" x 1/2" compression fittings:
http://users.on.net/~statts/black/black037.jpg
Again:
http://users.on.net/~statts/black/black038.jpg
DTEK FuZion V2:
http://users.on.net/~statts/black/black039.jpg
With Bitspower 3/8" x 1/2" compression fittings:
http://users.on.net/~statts/black/black040.jpg
Only just fit!!!!:
http://users.on.net/~statts/black/black041.jpg
Again:
http://users.on.net/~statts/black/black042.jpg
Bitspower 3/8" x 1/2" compression fittings:
http://users.on.net/~statts/black/black043.jpg
Second hand XSPC res with compression fittings:
http://users.on.net/~statts/black/black044.jpg
I continue with the excellent work
Nice Pictures!
Project BLACK and no Black Sparkle fittings? I demand a recount.
Uh oh - maybe I mis read but..... 3/8"ID 5/8"OD barbs with 3/8"ID 1/2OD? Did they teach you matches at school? The hose will be too thick will it not?
~Bex
what?Quote:
Originally Posted by RCG_Bex
5/8" is bigger then 1/2"... plus his other posts show 3/8"ID 1/2"OD compressions
Looking good, keep going! :up:
Well, it's Uni holidays so that means MUCH more frequent updates!
Since last update, I have picked up a new motherboard (DFI Lanparty JR P45-T2RS) and a new video card (XFX 9800GT).
Here's some pics of the work so far:
New video card with FuZion GFX2 installed. Some of my sleeving work can be seen at bottom of pic:
http://users.on.net/~statts/black/black045.JPG
Showing motherboard with FuZion v2 installed:
http://users.on.net/~statts/black/black046.JPG
Next tasks are to modify my iandh ramsinks for the video card as the XFX is not reference design, the mounting holes do not exist and a couple of caps get in the way. Dremel and some thermal adhesive tape will fix this.
Tomorrow is more sleeving and attempt to get my hands on some rotary 45's in a hurry as the clearance for tubing under the power supply is extremely tight!
Overnight update!
All labeled up:
http://users.on.net/~statts/black/black047.JPG
No turning back now! :shock::
http://users.on.net/~statts/black/black048.JPG
All done! Now just have to test it:
http://users.on.net/~statts/black/black049.JPG
Work today, so tonight's job is shorten the ATX 8pin and maybe mount the radiator.