congratulations newbeetle-san, i knew you would get your efficiency right,
i find this board to be great for 8m at high frequencies but not so great for 32m over 5.2ghz, but at 3.6ghz it is very fast
Printable View
congratulations newbeetle-san, i knew you would get your efficiency right,
i find this board to be great for 8m at high frequencies but not so great for 32m over 5.2ghz, but at 3.6ghz it is very fast
Thank you always, M8! :)
Thank you, nachthymnen-san. :)
Next, I will try 4M, 16M and PiFast. :D
Tahnk you, M3kk-san. :)
I will challenge sub 100seconds @ 8M. :D
Thank you, I34z1k-san. :)
Biostar P45 board seems to have no or very little cold bug. ;)
Let's try Biostar. :D
Thank you, makaka-san. :)
Thank you, Arne-san. :)
I love this board as much as FOXCONN BlackOps. :D
Thank you always, OC_Windforce-san. :)
To my regret, I cannot participate in the competition this time. :(
But, duck-san and Cal930-san enter the competition. ;)
Thank you so much, youngpro-san. :)
If I have neither your fantastic 32M results nor your advice, I might have been overlooked the speed and the possibility of Biostar P35 boards. :yepp:
DEWA DEWA
NewBeetle
Is this mb need the vmod for Vdrop and vdroop?
Well done NewBeetle-san :toast:
Great as always NewBeetle-san.
very very nice NewBeetle-San!!! Too bad no 32M, youve got good efficiency there!
wow amazing work
huge congrats
I think this mobo does not need the vmod for Vdrop and vdroop.
This mobo's vcore drop is very little : only 0.01v.
Thank you always, before-san. :)
Tweaks taught by you are very useful for me. :up:
Thank you, sobih25-san. :)
Thank you, TheKarmakazi-san. :)
32M is N.G. :(
But this system is good at Pifast and modPi 4M. :D
Thank you so much, dinos22-san. :)
Without your advice and encouragement, I couldn't take this result. ;)
Again, thank you very much for your kindness. :up:
DEWA DEWA
NewBeetle
Congrats New Beetle san..
Congrats for 8M Pi WR NewBeetle, you alway get the best results :up:
keep pushing man !!!
That's freaking amazing, congratulations NewBeetle.
Regards
Bravo Tanaka-san, impressive results.
To bad that Biostar is not available here in Greece.
Did the chipset has problems... below -50C ?
:) :D ;) :up:
Thank you so much, George-san. :)
I also have no problem for the chipset temp.
My thermometer for chipset can be measured only up to -50 degrees. :D
Many thanks, dinos22-san. ;)
DEWA DEWA
NewBeetle
Newbeetle I was near to you:D
http://www.xtremesystems.org/forums/...6&postcount=22