wow man very nice. push it some more:up:
Printable View
wow man very nice. push it some more:up:
lol this time around i was actually a bit worried about the vcore.. hehe i mean thats a lot for a cascade to handle and for the chip too :D .. the temps taken from the evaporator were constantly above -100cQuote:
Originally Posted by nachthymnen
i'll try ;)Quote:
Originally Posted by natedog420
oh yeah got some pics from my run too..sorry about the overall darkness in the pics
http://i163.photobucket.com/albums/t...s/DSCN1103.jpg
http://i163.photobucket.com/albums/t...s/DSCN1105.jpg
Damn.. and I did sold that chip away without testing :shakes:
Well, when you break 5.8GHz with it, I will be mad :D
When you will do some 3D tests?
im thinking of watercooling the nb and maybe the sb too, and use chilled water of course. so 5.7gigs here i come (hopefully) :DQuote:
Originally Posted by SF3D
about the 3d tests i will run some when i have the time.. maybe later on next week.. dunno.. i have couple of 2900xt cards waiting :D
What memory did you use and on what for settings i am looking for mem like that i am stuck on 540mhz and that aint good enough :mad:
Nice...
So i guess you like that board a lot right?
Awesome speeds man :up: I have just about the same setup and I'm at 570fsb.
Can you share your
Voltage settings - ;)
CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -
haha looks like you won't sleep while you are testing :D pretty nice E8500 kickin' here :clap:
Nice scores Solarfall :up: , the board u are using is not good for E8500, so u have potential for 615 or even 620mhz for fsb on 965 board. Did u try with only one core?
i have cellshock ddr2 pc8000 2 gb.. these stick work strangely with this board, they seem to need a lot of juice to clock well with this boardQuote:
Originally Posted by AmdForLife
hmmm yes you could say that :D :D :D :DQuote:
Originally Posted by drizzt5
sure i'll post them later on today, (its 5.25am and im just about to leave to work)Quote:
Originally Posted by runmc
hehe yep sleeping is overrated :DQuote:
Originally Posted by SoF
im aware of this little fact, maybe i'll hunt down a 965 board.. the commando seems to be pretty good :DQuote:
Originally Posted by Misko
btw i ran some prime too lol i forgot to post it lastnight..
http://i163.photobucket.com/albums/t...rime14422s.jpg
[QUOTE=Solarfall]
i used 2 sticks of ram
[QUOTE]
You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM
Good clock. pls 3dmark2001 test :up:
[QUOTE=TheKarmakazi;2934926][QUOTE=Solarfall]
i used 2 sticks of ram
havent heard of that one before.. hmm maybe its worth a try.. thanks for the tip :up:Quote:
You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM
sure thingQuote:
Originally Posted by EXPANDER
here you go :up:Quote:
Originally Posted by runmc
http://i163.photobucket.com/albums/t...s/DSCN1113.jpg
:D thanks :up: I will see if that helps me.
did some quick 3dmark benching today.. sorry i had time for only 01, maybe later on i will post other 3dmark scores too..
http://i163.photobucket.com/albums/t...22803dmark.jpg