temps compare? heatload...
grtz
Printable View
temps compare? heatload...
grtz
Quote:
Originally Posted by Jort
lol jort i have been a bit lazy but i will do compare soon
here is a 1m done on the copper base pot/2003 /1:1 4.4.4.12 /-155@1.75v
http://www.net7.info/1/6800/cold/1mm.jpg
try it with 1.85V and -130C it should be better which board?
commando
and you never no i need to get the temp prob closer to the base but will need ld to let me drill a small hole in his pot
Really nice results bazx :toast:
Regards
Nice work baz! Your x6800 is retail isn't it?
yes it is brett and it belongs to thickbrit he has alowed me to use it for a whileQuote:
Originally Posted by Brettbeck
been having some fun this morning with 1m on the copper base pot
http://www.net7.info/1/6800/cold/1m/bb.gif
He he - Nice clock speed :D
Good work Baz!
Tom
clock speed is fine for sure now i need some help to get that time down
hehe i have the fastest 1m in the UK
Nice one Baz :D! Windows 2003 for faster time :p:.
Still on commando? Can u share vcore and temp?Quote:
Originally Posted by bazx
Watching your picture I will do these:Quote:
Originally Posted by bazx
hide clock, kill lan, hide quick launch and lock taskbar, these is just what I saw is wrong from picture ;)
bazx you should have gone for 3-4-3-x timings instead.......it would have been quicker than 3-3-3-x
:)
Misko i am still on commando 6800@1.8v m/b is vdrop/vmod 1:1 /12x:)
unsure of core temp but pot is -150 12mm from the base
brett this windows 2003:p:
dino i think you are right and will be trying that set along with 1:1/11x next:)
you guys are very lucky with chips that can handle -150C pot temp :eek: :toast:
Quote:
Originally Posted by dinos22
it is properly lower at the base but still very amazing.
My Freinds X3060 cooldbugs at -118
-118C base temp or core tempQuote:
Originally Posted by Nosfer@tu
does speedfan report temps properly below -70C as i know it works fine with DRYICE
Really impressive results my friend, you have really nice chip there :toast:
Did you already make holle for k-type in the bottom?
Best Regards
Very impressive baz, has got to be a UK record for sure, well done mate on a good job.
1.8v maybe u find it to low, try with 1.9v, u have beautiful CPU out there :toast:Quote:
Originally Posted by bazx
Flat nine is everything expect easy ;)Quote:
Originally Posted by |JACK-
this chip belongs to a friend and i must be take care of itQuote:
Originally Posted by Misko
so i will have to leave 1.9v for him to try:)
Yes that's why I said 1.9V ;) , I have tried 1.95V, next time I will try 2.0V :) of course there is no rule that higher voltage is better then lower but still I'm gonna try :)Quote:
Originally Posted by bazx
base temp, Drilled 2½ mm in to the base core from the side, mounted and glued with Asetek thermal nasty studd thingy :)Quote:
Originally Posted by dinos22
Dont accualy remember the difference from base temp top bios temp.
So it is propperlu at -105 C for the cpu.
Cant we just do a Tcore mod ?
took all the advice given here and here is the results:D
still at same vcore 1.8v
link to full size image
http://www.net7.info/1/6800/cold/1m/1mfullsize.gif
http://www.net7.info/1/6800/cold/1m/ggg.gif
after i did this run the os got a bit flakey i think i turned of to many sevicesQuote:
Originally Posted by bazx