Quote:
Originally Posted by Billy-The-Kid
u did awesome job ! :up:
Quote:
Originally Posted by Billy-The-Kid
u did awesome job ! :up:
This board looks great..now when will it show up in AU? :(
The board looks very nice :D
It boots very fast and performance is outstanding!
Here is a quick 3DMark06 test from me :)
Attachment 129819
And in Portugal... i have some friendīs wayting for it :)Quote:
Originally Posted by jimba86
+1 :up:Quote:
Originally Posted by sofos1990
so let me get this straight . . .
good memory clocker, fast booting and super efficient 3D?
in for one.
Quote:
Originally Posted by jimba86
AU and germany should be in stock now ....:eek:
So i assume this week will appear in Romania, also. Or early next week.
EDIT: Damn, what a nice offer for you USA guys, on newegg:
Free 60GB SATA3 SSD drive- value 50$ , with this motheboard:
http://www.newegg.com/Product/Produc...82E16813157328
Thanks Splave for this great PSC kits . It is strong as Gskill 2400 8 11 8 kits .
http://picx.xfastest.com/nickshih/as...atriot2400.jpg
Crazy 2600 and tight subtiming , everything is under aircooling. Will put it under cold soon with 6.88g 32m chip.
http://picx.xfastest.com/nickshih/as...600patriot.jpg
No problem mate, enjoy! Looks greatQuote:
Originally Posted by nickshih
Going to put cpu on single stage and really let the samsung fly today :)
Great board testing yesterday Corsair Platinum 2666
some 5ghz 32m test
http://i.imgur.com/g5JaS.jpg
Well the board just appeared in stores in my country but the price it's just not so good. :down:
Maximus V Gene it's like 200€( i know it has some months in store) and Asrock OC Formula it's about 270€ instead of 240€, about 30€ more than is should be. It's not the same price as Z77 Professional as it should be it's 20-25€ more
Anyway it's just the first day, the price i hope will settle and lower a bit in a week.
Anyway in my country it's a bit of mafia in prices, big prices at launch.
^ clean run :) mate
@ aristidis I would like to see how your bbse run on this :)
Quote:
Originally Posted by Splave
You will see you will see :D when i'll froze them but maybe later cause a lot to do Moa is very near and a lots of others :)
Excelent! What voltage on memory?Quote:
Originally Posted by Vivi
Quote:
Originally Posted by xdan
hopes u can get one soon ! :yepp: let's bench
Thanks. In two weeks max i'll get one.
in for one thanks for the link:up:Quote:
Originally Posted by xdan
SS Fun happening now, going to have to ditch the samsung for some psc I think. IMC seems to not mind tight timings but is not a real performer raw mhz wise
http://i.imgur.com/rVDMk.jpg
I approve of this:yepp:Quote:
Originally Posted by Splave
Man you just motivated me to pack up my ss and get it sent to Ron to get fixed, I bet 5ghz runs are a breeze with it.
makes even a :banana::banana::banana::banana: cpu come alive imc wise :)Quote:
Originally Posted by l0ud_sil3nc3
This board is turning out to play really nice with almost all ram so far which is a good sign right off the bat.
"Take your ss to work" day. LolQuote:
Originally Posted by Splave
Looks like Fredyama make strong influence on you...Led is present ... :)
Looks like Fredyama make strong influence on you...Led is present ... :)Quote:
Originally Posted by Splave
hahaha yes! fred-san tweak :P
Dammm... saw vivi score and look back to my score it same as baby :D
my best now on water cooling cpu and air for ram (and IMC is weak :()
4.2GHz not tweak only try maxmem setting and can help only 1 or 2 sec :p:
http://img.techpowerup.org/120905/xs_4.2.png
5GHz not any tweak :)
http://img.techpowerup.org/120905/xs_5g.png
let see more later after get new better chip :D but this board rock performance and you do great stuff Nick :up:
Just got the board setting it up, everything is looking real good:up:
this board is getting better and better.
Asrock has outdone themselves on this one it seems.
Nice score ZolKorn!
I have some issues while booting with 2400. The first time...no problem...then hanging @ postcode 55!
No chance to boot anymore, but it was stable! 2200 no problem...but 2400 cl10-11-11-21-1T 98 was just running 3 or 4 times! What could it be?
hey emertX what memory and CPU? if it's samsung memory 11-11 is too tight
It is the Samsung 30nm...here on Asus MVF
http://www.abload.de/thumb/samsung3qpxbs.jpg
And here on Z77 OC:
http://www.abload.de/thumb/samsung4yqq89.jpg
The curious thing is...I was able to start like on the asus...running linx and stuff like that, but then, after restart...no boot! Postcode 55!
Which uefi would you prefer? 1.14p or 1.30?
So this is an excellent memory clocking board
PSC (4X2GB)
http://i.imgur.com/hDlJw.png
and here is a 4Ghz run with PSC
http://i.imgur.com/XQLwH.png
the 2X4GB run was under cold on the memory with no insulation, just a quickie at 1.85v:eek:
http://i.imgur.com/epZpE.jpg
:eek: what a great clock!
nice pi time too :D
im surprised this board isnt in AU yet..not even PCCG has it..:(
l0ud_sil3nc3, why didn't you tryed 4.2ghz run instead of 4ghz?
There are no 4ghz results here, only 4.2ghz posted by vivi and others.
Hey nick i am still waiting for a pm answer.
Btw this board is getting better and better :D
So only some problems with Samsung 30nm? This normally can be fix with a new bios i think.
Not sure where i read this hear, it was written that this error appears when to much pressure it's applied on cpu by cooler and memory lanes are having problems. Not sure 100% if it was this or error 5.Quote:
I have some issues while booting with 2400. The first time...no problem...then hanging @ postcode 55!
Although if they work at 2200 makes no sense/ or at higher frecuency the cpu it's more sensible.
nice l0ud! :D
I will redo one at 4.2, the reason for the 4Ghz run was for a lcc on OCNQuote:
Originally Posted by xdan
http://www.overclock.net/t/1300766/s...#post_18112404
thanks Splave, I am thinking there is something most definitely wrong with my MVE now, because it can not run the same clocks as this board.Quote:
Originally Posted by Splave
Besides being quite powerful in memories, it seems that 2001 is also!
With only 6606mhz on cpu, and 2642mhz on memīs :)
http://img26.imageshack.us/img26/3667/dsc2109d.jpg
http://img809.imageshack.us/img809/8297/158542.jpg
http://hwbot.org/submission/2312723_...0_158542_marks
I'll try now a decent score in superpi32m :)
siiiiiick score there billy! wow. welldone dude. Really rocking this board :)
Quote:
Originally Posted by emertX
Seems like u use too tight timing for ur memory
try larger TRFC ?
Sample test with this motherboard , It's fun to play many memory ics.
Asrock Z77 OC Formula with G.Skill Sniper 2133C9 Hynix CFR Cl11 2666 1.65V
http://www.uppic.org/image-E291_504A1E6B.jpg
Team Xtreem LV 2133C9 Samsung 30nm Cl10 1.65V
http://www.uppic.org/image-F9F5_504A2A3D.jpg
If this motherboard can add memory preset same with Asus Maximus V series too , It's will very perfect much.
http://www.overclockzone.com/zolkorn...ne/bios/15.PNG
ASRock Z77 OC Formula Launch in Thailand event on 8 Sep 12. ^^
Sample picture. :D
http://www.uppic.org/image-82D3_504D6E72.jpg
http://www.uppic.org/image-4BD1_504D6E72.jpg
http://www.uppic.org/image-673A_504D6E72.jpg
http://www.uppic.org/image-A107_504D6E72.jpg
And some 3D action from me with 2XGTX580 SLI :D
Attachment 129950Attachment 129951
Please guys...help me!Quote:
Originally Posted by nickshih
As I wrote, I'm not able to boot with 2400@mem! No matter which timings!
So...what could that be? I was able to boot it and it was fully stable. right no, I don't have any chance to come over Postcode 55! Today I tried 2600 - and it ran! After reboot...same procedure! Postcode 55! What the hell is that? I'm able to boot 2200 CL9-10-10-10 1T every time, but everything over 2200 - no chance! Please help me!
http://www.abload.de/thumb/samsung4yqq89.jpg
Quote:
Originally Posted by emertX
Have u tried black slot and yellow slot ?
please share the bios setting thx .... i need to see all ur memory timing\
Ur kits should have no 2600 or 2400 XMP . maybe u set the wrong subtiming . and it becomes unstable
From the Z77 OC Formula pdf manual:Quote:
Postcode 55! What the hell is that?
So it's clear after restart the memory it's not recognized/ or it can't run at that frecuency.Quote:
0x55 Memory not installed
Have you tried with higher VTT and vDIM voltage? And may be INTERNAL PLL ENABLED also?
I don't know haw Samsung 30nm works buy if you have 1.55v at 2200 try 1.60v at 2400.
And raise also Cpu VTT at 1.1100-1.150. You have also DRAM VTT, see some setting here, put .085v or higher.
And put if it's not INTERNAL PLL- ENABLED.
On my P67 PRO3 - although it's far away to give example- the board cannot boot at 2200 with INTERNAL PLL DISABLED, only ENABLED.
How can I save my settings to show you?Quote:
Originally Posted by nickshih
And no...my kits don't have a profile with 2400 or 2600! The subs are generally at auto except 10-11-11-21-1T 98.
Use F12 in bios, to printscreen the bios, the images will save on USB device.
Also i think that profiles from bios cand be open and saved from windows with some software given by Asrock and than you can load them to another board.
Let's make thinks easy :D
http://www.abload.de/thumb/dsc_00384nskw.jpg http://www.abload.de/thumb/dsc_0039ufs1h.jpg http://www.abload.de/thumb/dsc_0040ieshd.jpg http://www.abload.de/thumb/dsc_0041njsgw.jpg http://www.abload.de/thumb/dsc_0043p1scx.jpg http://www.abload.de/thumb/dsc_0045esshw.jpg http://www.abload.de/thumb/dsc_0046tosrz.jpg http://www.abload.de/thumb/dsc_0047ntsoq.jpg http://www.abload.de/thumb/dsc_0048scsu1.jpg
SPREAD SPECTRUM put DISABLED.
You are on IGP? May be the IGP cand work well with higher frecuency memory- due to sharing memory? Have you tried with dedicatet VGA?
Also you can try to raise some voltages as i sad before.
I raised all voltages! No difference!
I'm also on PCIe.
The strange thing is...it ran with same settings as on my asus MVF. But only one time! That was prime and linx stable!
Quote:
Originally Posted by emertX
i am not pretty sure what ur module can do .
if ur module is samsung chip . please try timing as below .
10 12 12 32 1T 16 214 7 10 10 30 8 others u can leave auto . 1.65v
it should work for any good samsung chip which can do 2400 even 2666
I saw GT frecuency active, on other boards i saw it inactive vhen dedicated VGA used.Quote:
I'm also on PCIe.
Quote:
Originally Posted by xdan
it is fine ..dont worry
Postcode 55!
Here are some pictures, what they are able to do on MVF:Quote:
Originally Posted by nickshih
http://www.abload.de/thumb/samsung3qpxbs.jpg
http://www.abload.de/thumb/samsung236zwi.jpg
http://www.abload.de/thumb/samsung72jeo.jpg
I'm tired of testing these chips! Hopefully my board is fine! Tonight I gonna get some XMP 2400 chips! Maybe some 2800?!
What about these chips?
http://preisvergleich.hardwareluxx.de/783302
Do they work on that board?
Quote:
Originally Posted by emertX
i dont know what problem of ur module ...
My samsung is working pretty well here .... i think urs can boot 2666 with my setting
Quote:
Originally Posted by emertX
that is hynix ... sure
Me too!
Again - it bootet once and was linx stable...now...no boot????
Which means? Bad or good?Quote:
Originally Posted by nickshih
Quote:
Originally Posted by nickshih
Tested in single Channel---NO PROBLEMS!!! What could that be???????
http://www.abload.de/thumb/unbenanntlgzrk.jpg
Quote:
Originally Posted by emertX
TRRD please set 7
Same...no change!Quote:
Originally Posted by nickshih
Any BIOS Update?
I've tested 1.10, 1.14p, 1.20 and 1.30
What about these right here:
http://preisvergleich.hardwareluxx.de/815039
http://preisvergleich.hardwareluxx.de/814961
Raise SA voltage and VTT.Start with VTT,try 1.075,1.1,1.125,and SA try 0.95,1V.I am 100% positive that the problem is in this area.
Already raised to impressive 1.25 and 1.1!Quote:
Originally Posted by Alex-Ro
No change!
But why is it running with single channel?
Maybe my imc is damaged?
Tonight I'll test G.Skill 2400 CL11!
+1 This would really look great, very handy.Quote:
Originally Posted by ihog6hog
Ok seeing price here in cro cost something more than gene V, not sure about Asus Formula since it's not available yet...
Quote:
Originally Posted by emertX
maybe ur CPU imc is damaged ... i have some cpu here cant do dual channel also ...always 55
Yeah, but, 2200 is running pretty fine.
After the problems with 2400, I was able to boot and play around with 2600...and that was today!
No idea, what that could be!!!
Damn computerstuff
Quote:
Originally Posted by emertX
come on it is overclocking ..... i will try to use my samsung do the same timing as urs later... have something else to do now .
Live@Germany...:clap:
http://www.abload.de/thumb/2400cqsb9.jpg
Now...reboot!
Back again...with full sped of 2400 MHz!
:D:D:D
Here one great score:
http://www.abload.de/thumb/wow04pjc.jpg
But...why must I raise the vtt that high?
Do I always have to raise both vtt? And what is healthy for the rig? I mean, what is the max, I can give under water for 24/7?
I can't bott with a lower vtt than 1.15!!! But when I'm in windows, i can lower it to 1.05!
Quote:
Originally Posted by emertX
what vtt u used ?
1.085 i see there,not so high in my opinion,it;s pretty safe for daily use.
For booting I needed 1.15V VTT1 & 2!
Now I booted with 1.07 on VTT1 and VTT2 @ default - 1.034!
But it runs like hell! Especially with these subs :D
Here with linx running.
http://www.abload.de/thumb/linxfrcva.jpg
Quote:
Originally Posted by emertX
1.15 is pretty safe dont worry hahahaha gogogogo let's overclock
u can use vtt1 115v vtt2 keeps default
Great...I just came into windows with 2600 10-12-11- @ 1.64VMEM and 1.11 VTT1 and 0.96 SA
Afterwords with 2666...but my timings have been too low! couldn't run more then one aida bench :(
http://picx.xfastest.com/nickshih/asrock/Z77OCF114U.rar
New bios updated
Improve timing for PSC and BBSE with 2400~2600 memory ratio
My psc is flying now . 8 12 8 28 1t 8 86 4 4 4 16 7 2652mhz directly boot into os memory 1.835v
http://picx.xfastest.com/nickshih/asrock/2650.jpg
So, I found the problem!
@nick
the booting voltage for the vtt is too low! I think, that's the reason, why my mem's won't be dedicated.
I can boot now with vtt1 1.076, vtt2 default, vcssa 0.958.
In windows, it's no problem to lower the voltages! Booting with 2666 needs 1.15 vtt1 and 0.98 vcssa, but in windows, I'm able to lower the settings to 1.08 and 0.96.
Please have that in mind while constructing the next BIOS ;)
Little bit try for cas 7 on my PSC kits and can holder for Spi32 max at 2520MHz it cool but will try again for last new bios :up:
btw. 1.75V Vdimm, 1.25Vsa/vtt :D
http://img.techpowerup.org/120910/pi32-2.png
Quote:
Originally Posted by ZoLKoRn
please try 1.83v 8 11 7 , u will get boost ! CL7 is useless for PSC chip ...CL8 gets better performance .
i have auto rule for different memory clock speed , u dont have to set the vtt and vccsa actually .. it will raise up automatically .Quote:
Originally Posted by emertX
Vtt and Vccsa still depends on cpu quality . some need high , some not . But it is great that u make ur memory clock boost now . congrats !:up:
emertX, the motheboard must boot with VTT 1.050-1.057 this is Intel stock.
The memorys with higher XMP( 2400-2666) set with the XMP the VDRAM voltage but also the VTT(1.100-1.150v).
On Samsung you don't have profile at 2400 neither at 2600.
On MV may on AUTO the board set's a better VTT.
On Asrock may be on AUTO even though oc is in , the board just let it to default - 1.050v.
Or may be i missunderstood, when fail to boot your VTT was on AUTO or MANUAL 1.050V?
It's just that you have to set the voltages manual, other than that ....
Man i have to have a lot of patience, one more week and i will have the board to....:)
I have a PSC kit and BBSE kit . I hope they do at least 2600.
Thanks Nick ;) i'll try again tomorrow with your post new bios and Yessss you right C8 better over C7 from i try before on other MBQuote:
Originally Posted by nickshih
Quote:
Originally Posted by ZoLKoRn
cool , ur event in Thailand is cool . please send me some pictures ! nice work :yepp:
Thanks! So you mean, I'll have to let the voltages @ auto???Quote:
Originally Posted by nickshih
Here's a message from vita. I should give it to you!
Quote:
Hi Nick,
Thanks for your mod bios(0.31M) good work.
However, I have a problem, if I set the offset mod, LLC Level.5, takes over the board level only. 1, there is a bug?
you Would be very grateful if you could help me.
greeting Vita
So...I'll test Auto config now!Quote:
Originally Posted by xdan
Quote:
Originally Posted by emertX
VTT1 is more important for memory OC , i have auto rule . Normally 1.15~1.2 is enough for 2800
VTT2 u can leave it auto
PCH1 is more important for BCLK OC , i have auto rule . 1.15v is enough
PCH2 u can leave it auto
VCCSA 1.15v is enough for even 2800
Thanks!
And now my last question concerning mems :D
Which would you prefer for that stunning board?
http://geizhals.de/783290
http://geizhals.de/783302
http://geizhals.de/814961
Quote:
Originally Posted by emertX
gskill 2600 CL10 maybe samsung , i am not sure . Maybe is high-bin hynix
gskill 2666 CL11 it is hynix
Team group 2666 CL10 it is samsung
samsung is best choice . Cas latency is 10 .
Thanks a lot - due to some answers in the g.skill thread, there is samsung under the 2600's
Quote:
Originally Posted by emertX
then u can choose the brand u prefer ..:clap:
for ASRock Z77 OC Formula event here you can check ton of pictures from link below
http://www.facebook.com/media/set/?s...3442941&type=3
http://www.facebook.com/media/set/?s...7573870&type=3
from event we have some good chip it can bench 3D easy at 6.6GHz but not enough time for
more tweak or try for other benching and for max post at event can show at 6.9xxGHz screen ;)
Thanks for hard of work from you man :up:
btw. can fix about Rapid OC for can select more Vcore limit ? it not enough for 1.7V, should be max
Quote:
Originally Posted by ZoLKoRn
1. u have to enabled the extreme voltage in BIOS !
2. u have to set your own Vcore limit in the rapid OC software for some safty reason . please download from this link
http://picx.xfastest.com/nickshih/as...latool0830.rar
1. Yes already enable
2. it limit only 1.7V for max select on Rapid OC Software and for Formula drive it can setting over 1.92V but Vcore won't go up it stuck at 1.92V on CPUZ
Quote:
Originally Posted by ZoLKoRn
u have to choose the limit in the drop down option of vcore limit . i can choose to 2.1v here no problem !
And if u use the early P bios to bench , u cant change it for sure . Only the new L bios here and new P bios in the future will support 2.1v on rapid OC ! :up:
OK i let checking it again later now it not on test bed, Thx for help ;)
edit : Ahhh...Okay i see on event we still used old bios 1.13 it other board with on my hand so bad for not update or checking before :(
Quote:
Originally Posted by ZoLKoRn
hopes we will bench together again soon !! see you
Yah.. i hope so !!! see you too :)