ohboyohboyohboy.....can't wait! Looks great! :up:Quote:
Originally Posted by Dimas
I was really hoping the wrinkle, 'no-finger-print' finish would turn out alright. Fingerprints on my computer tower are very annoying. :)
-Ben
Printable View
ohboyohboyohboy.....can't wait! Looks great! :up:Quote:
Originally Posted by Dimas
I was really hoping the wrinkle, 'no-finger-print' finish would turn out alright. Fingerprints on my computer tower are very annoying. :)
-Ben
updating some more colors and 10 SLOT XL-ATX support tomorrow;)
Is there any way to put two rads in there? Also, really nice, and nice price too.
BTW, I can't find the shipping prices on your website, where should I be looking?
hello, i'm working to adding a separate support for second radiator on the right side, opposite of the first radiator.Quote:
Originally Posted by prava
the sites calculate automaticaly ship cost, if not your country is not yet listed, please send a contact form asking for that and this ship cost will be added for your specific country;)
Ah, ok, so you have to check out in order to know the shipping costs, right? When will you have this revision that supports the 2nd rad?
exactly, i hope before half of this month;)Quote:
Originally Posted by prava
techpowerup reviewed one of Bench Table Easy V2.5 here: http://www.techpowerup.com/reviews/D...ble_Easy_V2_5/
some new color customization, it is a Carbon Look bench table Easy V2.5
it's a prototype and maybe it need another run of glossy trasparent paint.
http://forum.nexthardware.com/galler...0089_1__1_.jpg http://forum.nexthardware.com/galler...0089_1__2_.jpg http://forum.nexthardware.com/galler..._0089___6_.jpg http://forum.nexthardware.com/galler...DSC_0089_1.jpg http://forum.nexthardware.com/galler...0089_1__3_.jpg http://forum.nexthardware.com/galler...0089_1__4_.jpg http://forum.nexthardware.com/galler...0089_1__5_.jpg http://forum.nexthardware.com/galler...0089_1__7_.jpg
together with the carbon look, there are the XL-ATX adding cards support;)
http://forum.nexthardware.com/galler...1_DSC_0077.jpg http://forum.nexthardware.com/galler...1_DSC_0073.jpg http://forum.nexthardware.com/galler...2_DSC_0069.jpg http://forum.nexthardware.com/galler...1_DSC_0066.jpg
Yay :D
http://images.hardwarecanucks.com/im...ch/dimas17.jpg
Full install thread here
nice pictures Zac, waiting for the Final istall;)
Ah yeah this was quick, I still have to tear apart all my water cooling and reassemble in a more convenient way. Not sure what to do with my giant heatercores, will prob have to keep them external like they are now. Great benchstation tho mate, even my gf likes it hehe.
Switched in flex fan, very cool addition
http://images.hardwarecanucks.com/im...ch/dimas25.jpg
just waiting on the revision that supports the second rad... once it is complete ill definitely be placing an order! white looks the best by far :)
we're a bit on late, having problems with fixing job...Quote:
Originally Posted by TBahre
I've been following this Thread so long and definetely i'm very interested on the 2 rad version.
I specially like the White Matt and the carbon look.
Keep Improving this benchtable, i think it's one of the best ( if not the best)
PD: I'ts my first post and I'm not english so sorry for the possible errors :P
Finally started snapping some photos of my DimasBench...
Great construction and layout, very excited to see if I can work two loops with the normal configuration... stay tuned. :)
nice to hear you, hope everything arrived integer...now we can say that our package is Italy->USA approved...Quote:
Originally Posted by skinnee
:), Yup, box was in great condition and all the parts inside were safe.
Oh I've always wanted to see this in person. :) Let's see some pics.Quote:
Originally Posted by skinnee
Lucky for you its only a few miles away. :p:
Pics are taking a bit longer, switching between a white backdrop and black backdrop due to the bench being white. :)
Italy to Canada approved as well. Box was opened by customs and beat up but inside everything was perfect. Great packing :)
http://images.hardwarecanucks.com/im...ech/dimas1.jpg
http://images.hardwarecanucks.com/im...ech/dimas2.jpg
that box look like have been acting like a soccer ball, we've been trying to launch from 1mt and 2mt on the corners of the box, to test packaging and foam, the internals never get problems, only screw nylon bag move inside...
The screw bag was gone, Im thinking customs took it. :shakes:
resend me your address via pm, i'll try to get you a new bag;)Quote:
Originally Posted by Eldonko
my dimastech dinner table...
http://i24.photobucket.com/albums/c5...0064Medium.jpg
Heh thanks but I can manage without one. :DQuote:
Originally Posted by Dimas
any updates on the dual rad version dimas?
hello, thanks for your update, we had problems with that radiator on right side adding parts, so we decide to give a run of tables with dual sided 3 holes for supporting dual radiators, the PSU is possible to be positioned on the middle of table.Quote:
Originally Posted by TBahre
Sounds good :)Quote:
Originally Posted by Dimas
If I want one of these tables with the dual sided 3 holes how do I go about ordering it? Do I include a note that lets you know what I want when I order from your website?
there will be a single product, impossible to go wrong;)Quote:
Originally Posted by TBahre
Thanks for the info dimas! When should I be able to place an order?
hello, i think before end of month, need to sort out if there are some more people interested to see how many piece to produce...Quote:
Originally Posted by TBahre
¿So you are still developing that Benchtable that will include the place for a triple rad and on the other side the holes for a dual/triple rad( don't know which are you considering) ?
If that it's affirmative i will be one of the people who are interested in purchasing one of them :D
Cheers
yes, definitively, it will take around 2 weeks, we will post update in this thread;)Quote:
Originally Posted by guilleguillaume
down here, a full PDF manual for Easy V2.5 Complete istallation Guide.
Bench Table Easy V2.5 Manual ITALIAN
english coming later this end of week.
How's it going with retail availability here in Europe?
hello actually AT is having part of our products, next week they will receive the last part...Quote:
Originally Posted by Smartidiot89
english manual ready for Easy V2.5
Bench Table Easy V2.5 Manual ENGLISH/AMERICAN
Interestingly, designed for desktop obudowa.ładne finish. It will be for sale?
Dimas, do you have any plans to make a smaller version of the benchtable? I really like the design of the Easy table, but it's a bit too big for me at 440 x 455 mm of desk space. Something about the same size as Danger Den's mini torture rack would be perfect, only with Dimastech design (not made of acrylic).
please send pm if interested;)Quote:
Originally Posted by Awers
we can think about, let's make some render to show...and see if people like;)Quote:
Originally Posted by Lunait
what kind of peripheral you'd like on it? optical? hds? how many?
Maybe 1-2 optical and 3-4 hd? I'm thinking that it could be used for benching on LN2 or air, so it wouldn't need space for a radiator.Quote:
Originally Posted by Dimas
I think if it has to be for ln2 or air benchers it don't need more than 1 optical but 3 or 4 hdd (as Lunait wrote) ;)
it could be modified version of hard which is (imo) good idea ;)
Sounds good.Quote:
Originally Posted by FatAlbert
Maybe. I'd like to be able to fit the PSU, optical and HDDs underneath the motherboard, though, so that it could be used for a "normal" PC (air-cooled) as well as for benching.Quote:
Originally Posted by FatAlbert
yeah, it also is good option!
waiting for first sketches from the Dimas ;)
Hey Dimas. I love your bench tables and am considering getting one, but on your website i couldn't figure out how to get a shipping estimate. Any way you could give me a shipping estimate for the easy v2.5, and for the hard v2.5 (separately b/c the overall price of each probably will make my decision for me) to Naperville, IL 60540, USA.
Also, i too am interested to see this mini table.:)
I made a render in Solidworks showing how I imagine it to look:Quote:
Originally Posted by FatAlbert
http://i41.tinypic.com/sq4m7m.jpg
In this render, the bench table is 350 x 300 mm (width x depth). I used a 5.25" support cage only, thinking that you can convert any number of 5.25" slots into 3.5" slots. In the render, I used a hot-swap module to convert two 5.25" into three 3.5", but you get the idea. And there is also an optical drive at the top of the 5.25" cage. What do you think?
looks nice, if you can, please post more photos, would be nice ;) with psu and your ideas about hot swap etc ;) as fast as you can ;)Quote:
Originally Posted by Lunait
good idea you had there! I think if there will be one 5.25 and rest will be 3.5 would better because one optical is enough for benchers and 4/5 hdd hmm, 01/am3, 03, 05, 06, vantage. That's how I see it and also, on the left side under cpu will be psu right?
sorry for ot dimas, but we are trying to show our vision of the benchtable for overclockers only ;)
edit
http://img109.imageshack.us/img109/6428/sq4m7mjpg.jpg
ad.1
I think there should hole for 8/4pin power for cpu. space for two plug will be enough (as now all EVGA's boards have it, ASUS REX3)
ad2.
some mounting for fans blow fresh air for the gpus.
Finally i got my head clear and ordered one Bench/Test Table Hard V2.5 Inox! Cant wait to have it.
Nice job Dimas, keep up good work!
Thanks :) Yes, the PSU is located below the CPU, to the right of the 5.25" cage. The idea with only using the 5.25" cage was that Dimastech wouldn't have to make a new cage for a combination of 5.25" and 3.5" slots. But if they're making an entire new benchtable anyway, I guess the new cage would just be a small detail. I'll post some more pictures this evening. Fans for the GPU area could be mounted in a similar way as on the Dimastech Easy benchtable. There are thin slits on either side of the motherboard for that purpose: http://www.techpowerup.com/reviews/D...fanholders.jpg (they're not very visible on the GPU side, but they're there)Quote:
Originally Posted by FatAlbert
The hole for 8/4 pin power is a very good idea. I'll add that and post another render tonight.
EDIT: Sorry for hijacking your thread Dimas - we could have the "mini benchtable" discussion in a separate thread if you want.
that's very if there are holes for extra fans. Holders for fans can be from the dimas v2.5 easy (as you wrote). I was thinking about 4x5.25 space for optical/hdd and it's good idea but there has to be place for at least 1 optical 4xhdd (imo). Will be cheaper.
waiting for new sketches Lunait! ;)
Well, a 4x 5.25" cage would have space for 1 optical and 4 HDDs, since you could use a converter to turn 3x5.25" into 4x3.5". However, such a cage would be about 190mm tall, which I think is a bit too tall. An alternative could be to use Dimastech's 3.5" cage instead (which has space for 4x HDDs), and mount the optical vertically, like this:Quote:
Originally Posted by FatAlbert
http://i41.tinypic.com/14t7qx3.jpg
(This is a sketch of the case as seen from the front)
This would require construction of a vertical 1x5.25" cage, but that doesn't seem very difficult.
I was thinking about that too but, hmm, did not look good imo. But today's optical easily works in that position so, no probs with it. I was wondering how height table will have. What height you have in your sketches ?
I'll try the vertical 5.25" drive in my next render and see how it looks. The height of the benchtable in my render on page 5 is about 180mm (without case feet and components).Quote:
Originally Posted by FatAlbert
ok :)
waiting for sketches then.
Here are some renders of the mini benchtable with the vertical 5.25" cage:
(click on the thumbnails for larger images)
http://i40.tinypic.com/339t1zq.jpg http://i44.tinypic.com/2z6grr6.jpg http://i39.tinypic.com/14e075z.jpg
http://i43.tinypic.com/2yxljsp.jpg http://i39.tinypic.com/2yuwmm9.jpg http://i43.tinypic.com/ekm8o3.jpg
looks good:)
but I think there should be option for 10 slots as v2.5 easy/hard have ;)
also add to sketches hole for 2x8pin cpu
http://img136.imageshack.us/img136/3290/2rgkrco.jpg
or something like this (paint moded:D)
optical, hdd, hdd and after theses hdds another 2 or 3.
Well, if you look at pic #2 in my previous post, you'll notice that there is a hole just beside the 8-pin MB power plug. Also, by "10 slots" I assume you mean PCI slots, which would be nice but the case would need to become bigger for that (to accomodate XL-ATX boards), and then it sort of defeats the purpose of this mini-benchtable since it would be nearly as big as the Easy benchtable by then.Quote:
Originally Posted by FatAlbert
Your solution for the optical, PSU and HDDs is nice, especially since it allows the benchtable to be lower in height, but I don't think a second row of HDDs fit behind the first ones since the case is only 300mm deep. But if you only need 2 HDDs, then your solution works very well.
sorry, didn't notice that. looks nice!Quote:
Originally Posted by Lunait
yeah, probably your 100% right.Quote:
Originally Posted by Lunait
maybe move another HDDs by 90 degrees ?Quote:
Originally Posted by Lunait
or maybe 2xhdd it's good option. hard version doesn't has place for optical and for hdd :D
Yeah, 2 HDDs could be enough, I think. Then the case could be lowered to just 130mm in height.Quote:
Originally Posted by FatAlbert
http://i43.tinypic.com/a1dw8.jpg http://i39.tinypic.com/1zlqccy.jpg
Dimas, what do you think? Would this be doable?
I wonder if there wouldn't fit 2x3.5 disks and side by side another 2x3.5 disks .. and on top of them DVD? Judging by latest pics summed up clearance from disks till sidewall and till PSU seems similar to disk width.
Another variant: 2 disks vertically, dvd between them and PSU, and 2 disks upon dvd as in current variant.
In both variants there is space upon/below DVD for 4x2.5 disks/SSD?
I like it :D
and system will be on hdd you can use place for optical as another place for hdd :D
Well, in the latest variant I don't think a 3.5" HDD will fit on the side of the 2x3.5" cage - it's about 70mm high, and a 3.5" disk is 102 x 147 mm. You could fit a 2.5" SSD on each side of the 3.5" cage, though. Or you could use the 5.25" slot for a third HDD, if you don't need a DVD. Also, the space between the PSU and DVD is tighter than it might look, since you need enough space to attach the PSU support and the 5.25" cage to the bottom of the case as well.Quote:
Originally Posted by churchy
please send pm for this, thanks;) or use our contact at website...Quote:
Originally Posted by xxrabid93
Quote:
Originally Posted by Lunait
hei...sorry for delay, been reading all the last part of thread, i think you can continue it here...that is why i personaly open threads at xs or other forums, to listen to new idea e to users/customers feebacks, to improve step by step all the products...
i think also i no longer need to think about to make things..just have 2 guys like you:D...to work..
the render looks nice and surely doable, as a middle solution between hard and easy table, lets say a Hard without arch, but with some supports...
just need to sort out, what are the final need, surely PSU, 1 DVD and 4 HD 3,5", and maybe a way to use also 2,5" SSD in the 4HD support...am i right?
about XL-ATX boards, its a huge problem, couse...if you want to make it really tight, it's not possible to use this misurements, i think that from the original Easy, you're about to loss at least 5 cm only...
waiting for some feedback on hardware list;)
The things I would need are 1 PSU, 1 DVD and 2 HDD, like in this pic:Quote:
Originally Posted by Dimas
http://i39.tinypic.com/1zlqccy.jpg
Standard ATX boards is enough for me (not XL-ATX, that would make the case too big, I think).
Maybe "Dimastech Mini" is a good name for the table? ;)
it is nice that you guys made an agreement ;)
PM'd.:)Quote:
Originally Posted by Dimas
Lunait, sick work so far on the mini. Any way of getting it a tad shorter? For it being a "mini," it still seems a little big, mostly the height.:rolleyes: EDIT: Nvm. I just saw your version with 1 dvd and 2 hdd. That is a perfect height and fit it seems.
Thanks :) Yeah, I think it's as small as it can reasonably be now.Quote:
Originally Posted by xxrabid93
everyone: Is the version with 1 PSU + 1 DVD + 2 HDDs the consensus then?
let's go for the last one...XL-ATX motherboard are very big..we can think about an adding accessories just for that motherboard, couse making all for XL-ATX is very non sense,
some other suggestions on the build? who prefer round corner or who prefer rect corners on top?
Well, rounded corners look nice, but also means that the case has to be wider. Not by much, though.Quote:
Originally Posted by Dimas
In case anyone missed it, my review of v2.5 Easy was posted last week, I'll be reviewing v2.5 Hard soon :up:
http://www.overclockers.com/dimastec...sy-v25-review/
Thanks again Andrea, beautiful work my friend :toast:
Dimas, will there be any possibility for a dual PSU configuration on your bench table?
Round corners are nicer.
there's already compatibility for mount 2 psu on the back, or else one psu on front and one on the back, holes for fix psu support are all around the tray.Quote:
Originally Posted by lkiller123
the standard tables comes with 1 psu support, up to you if you need another one just ask...
Hey dimas, last time I checked in on the table that supports multiple rads was about 3 weeks ago. Any more info on these?
Or... is it possible with the current easy 2.5 setup to mount multiple rads in a vertical position? Such as the following.
Original intended rad setup:
http://www.deviantart.com/download/1..._by_TBahre.jpg
Vertical rads (can this be done?):
http://fc09.deviantart.net/fs70/f/20..._by_TBahre.jpg
I agree. Part of the Dimastech trademark style I think :)Quote:
Originally Posted by BulldogPO
Dimas, any ideas on pricing for the Mini benchtable?
Hello, next lot of tables is coming in end april/ begin may so hope we can supply you the dual rads one...Quote:
Originally Posted by TBahre
about this kind of mount, it is possible to realize, the spacing between rads it's enough for this radiators mounting.
about Mini Table, have find time to sketch it, need to find more time to take on 3D...and maybe that we have some quote;)
Thanks for the reply dimas, I'm going to wait it out for the next lot of tables for the multiple rad support as you say. It should actually work out well as I hope to have my rampage III extreme about the same time those tables are ready.
I have a Solidworks 2009 3D model of the case, if that's of any help.Quote:
Originally Posted by Dimas
If you make a prototype, I can try it out :)
let's go for the deal...pm me detail, so we can go on from a existing point...and let the work be a little bit more easy...Quote:
Originally Posted by Lunait
the peripheral to add are decided and spacing too,if we can share some piece with existing version will be good too...
waiting for you ;)
PS if everyone have nice ideas around there...we bring em to real...eheh...
A very famour Italian Modder, take our table as inspiration for his own last work...let's show some pics from the mod lab..
http://www.italiamodding.it/rigor/overviolet/ovlogo.jpg
worklog link, italian language but pics talks better that what is write, and launguage barrier, possible to follow here: http://forum.nexthardware.com/moddin...-mino-way.html
some pics taken random
http://www.italiamodding.it/rigor/ov...0420101276.jpg
http://www.italiamodding.it/rigor/ov...6022010852.jpg
http://www.italiamodding.it/rigor/ov...0420101205.jpg
http://www.italiamodding.it/rigor/ov...0420101280.jpg
http://www.italiamodding.it/rigor/ov...0420101304.jpg
http://www.italiamodding.it/rigor/ov...0320101158.jpg
http://www.italiamodding.it/rigor/ov...0420101305.jpg
http://www.italiamodding.it/rigor/ov...0420101336.jpg
and 2 videos for first startup, more detailed pics at the Fair it's about to be exibited.
first power ON
RadioComand Test
I discussed my ideas couple posts earlier with Lunait so I am waiting for sketches and for real mini bench table :up:
I have sent you an e-mail (to info@dimastech.it) with the solidworks file.Quote:
Originally Posted by Dimas
I saw this somewhere in the WCing forum and I think this (double rad mount) might be a nice addition to your design, Dimas :)Quote:
Originally Posted by Darth_Penguin
Thanks Dimas, I received my Dimsatech Bench / Table Test v2.5 Hard Inox this week!
Also writed a little review, you can find it from here: http://translate.google.com/translat...64&sl=fi&tl=en
Review behind the link is translated with google translate and translation isn't perfectly correct.
Here some pic's:
http://i882.photobucket.com/albums/a...g?t=1272126390
http://i882.photobucket.com/albums/a...g?t=1272126433
http://i882.photobucket.com/albums/a...g?t=1272126479
Thanks again Dimas, keep up good work!:up:
just to say this straight i want one of these tables, i love your tables but felt it was a bit big, as my computer table was to small for it, if you are making this Dimas, give me a PM.Quote:
Originally Posted by Dimas
we can then talk money and stuff, i dont mind paying up front for this size of table for you to ship it too me when done,
ohh and that fake carbon fiber might be a nice option ;)
let me know what you want to do, but no dought i want one of these :up: consider it a pre- order :yepp:
Hi Dimas, is this the color "Milk White" that's listed on the product page on your website? It looks fantastic!:up:Quote:
Originally Posted by CornerJack
yes it is...some development on Mini have begin...Quote:
Originally Posted by lkiller123
thanks for your comments DosDuoNo, that always help to see people like...and again..thanks Asmola, nice pics and if you want, the white protection under the table is removable, we left on just for not damage mirror effect on the back;)
Dimas: i got one perverse idea. To make benchtable rackmountable and be usable with some rackmount rails. :) - for cases/for benchers where there are several such benchstations, so that it can be easily slided out on rails from rack with all the components for changing/maintenance .. is such idea stupid? If compared to filled clutered desk with several laying side by side, or stacked one on to other i always liked cleanliness and compact housing of server hardware in racks .. though then again, how many have several, how many do simultaneous tests/benchrans at same time? :)
what you could also do is take a cheap server 1u or 4u case cut the top panel and weld or screw your bench table to the server case and have a bench table that can slide in a server rack.Quote:
Originally Posted by churchy
I already removed those, I kept those just for not to get any scratches to table while installing and turning it round and round!;)
Quote:
Originally Posted by Dimas
That looks familiar :DQuote:
Originally Posted by lkiller123
Just ordered mine form aqua-tuning, cant wait :)
Just ordered my asus rampage iii from newegg! Now all that is missing is the benchtable that supports multiple rads...
I was thinking that it might be a good idea to make cutouts on the sides of the case, to be used as handles for carrying (see picture). Or would that make the case too weak to hold the motherboard and components on top? Also, how do we prevent people from cutting their fingers off when trying to lift it?Quote:
Originally Posted by Dimas
http://i42.tinypic.com/f0racp.jpg
Just got mine too!! :D Thanks Dimas for helping with the team-order made with sofos1990. It's pretty awesome. I'll post some photos when I return to benchbase :DQuote:
Originally Posted by Asmola
Imho simpliest/cheapest would be cutout top border to be shallow U shape and bend it to the inside and upwards .. in U shape :).Quote:
Originally Posted by Lunait
There are also "c" form rubber pieces that can be put on top of cut. But result will be probably less of a looker.
I think you can "custom order" them.Quote:
Originally Posted by TBahre
They already have cutoffs on the side. One side supports 3x120 rad, another side is an opening.Quote:
Originally Posted by Lunait
Actually these are something that Dimas has been working on for awhile now.Quote:
Originally Posted by lkiller123
Last I heard from Dimas:
Quote:
Originally Posted by Dimas