Very nice results! two thumbs up :up::up:
Printable View
Very nice results! two thumbs up :up::up:
Noeru, I'm curious on how you got both of the RX240s to fit down the bottom, could we get some more pictures to show how you made them fit?
Did you have to cut a bit of the bottom hole where the grommet was for cable management out?
Cheers
Wow, this is an amazing work. I love this case anche the 480 on top is classy... wish I saw this before buying the RV01. Very very nice!
very very thanks Were better than expected resultsQuote:
Originally Posted by Weevil
hello Sil2Quote:
Originally Posted by Sil2
thank you for getting me interested in the work,I cut the bottom for air flow to the bottom and work.
The piping for the 10mm rad is the offset.RX240 tried to connect a rotary angle, we stopped for a difficult
'G1 / 4 D-Plug Set-ONE Inch Version' also had enough Specified After all, Tygon are connected.
As work is still processing and front panel wiring.
Attachment 99771
Attachment 99772
Attachment 99773
Attachment 99774
hello smanet:) very very thanks:welcome:Quote:
Originally Posted by smanet
that's a very thin fan! 15mm thick? what fan is that?Quote:
Originally Posted by noeru
hello Serpentarius:)Quote:
Originally Posted by Serpentarius
this fan is KAZE-JYUNI-SLIM 12ｍｍ
http://www.scythe.co.jp/cooler/kaze-jyuni-slim.html
Attachment 99782
Blood + The work is not finished yet.It is still working・・・
Attachment 99777
Attachment 99778
Attachment 99779
I really like what you did with the case; it looks really good, better then mine that's for sure ;)
Thanks for the pictures noeru.
Out of curiousity how did you get the two 240s to stand up cause i've got one at the moment and i just can not get it sit on its side, it keeps on hitting the top of the bottom compartment.
Cheers
EDIT:
Got it in but required a little bit of force :)
Beautiful build man! Aregatto noerusan for sharing your work!
Thanks for watching me without boring:)Quote:
Originally Posted by Baulten
If I indicate if your image will help:up:Quote:
Originally Posted by Sil2
Thanks! It's nice that you admire from:DQuote:
Originally Posted by Anemic
looks good but the colour of the tubes are not so good :/ is thin 1/2" tube ?
i think i know wich sys was your inspiration ;)
Thanks!:)Quote:
Originally Posted by whuzabi
this tube is 1/2 (3/8)
The colours look perfect to me!
B-E-A-UTIFUL! Nice job! :clap::clap::clap:
Weevil! veryvery thanks always! I have to thank you.:DQuote:
Originally Posted by Weevil
Beautifull !
But it looks a lot as Malik´s .. you must be inspired by him LOL
Anyway awesome case and everything looks good.
very thanks:)Quote:
Originally Posted by Raiden
^^ Yes, the PC is in like with Malik's.
Thing that is certainly influenced by him.:yepp:
Flat for illumination and inspection work in the case of LED (12V) was established.
This can be verified, such as leaks.
And this is the ZALMAN fan-con is connected to, can come to adjust the brightness.:up:
Attachment 100020
Attachment 100021
Attachment 100022
Very Very nice. Great build
Chad
Very nice noeru, fantastic work and photos! :up:
very very thank you If i help you, i'm happy:)Quote:
Originally Posted by triggs75
veryvery Thanks! charles's words makes me glad:up:Quote:
Originally Posted by charles_h
noeru i just love your bild you even made me buy the same case. Great work man
veryveryThanks! If I am happy to help you.:)Quote:
Originally Posted by Psydrop
Please tell the things I needed, I'll help you if you are satisfied with :up:
Mid Night2 800D BLOOD+
Attachment 100073
Attachment 100074
Attachment 100075
Attachment 100076
Wow, this is such an inspiring build! congratulations on finishing it, I have been watching this for weeks!
looking very nice m8.
Quote:
Originally Posted by NAM_killer
hello thank you for watching my work:)Quote:
Originally Posted by Psydrop
Close Case room temp 18.5℃ Water temp19.5
try to the max clock:rolleyes:
Attachment 100150
Wow, Extremely Nice mod. You done a great job. Oh you pushed your cpu to nearly 5ghz. Could you mind to tell me what is the temp of ur cpu at 5ghz?
Normally people dont take temperatures into consideration when they are going for a suicide shot :)Quote:
Originally Posted by Mjhieu
thanks^^ Image is smallQuote:
Originally Posted by Mjhieu
Attachment 100151
Nice build. :)
Thanks, :D Amazing Temperatures, I love ur water system :p:
Quote:
Originally Posted by noeru
I wonder if it's possible to fit HWLabs Black Ice GT Xtreme 560 monstrous rad (153mm/605mm/54mm) in top of Obsidian 800D in similar way?
Hi churchy I think I have a GTX560 this "800D" in order to achieve cut the front panel mustQuote:
Originally Posted by churchy
this case is External dimension is 585m/m
Attachment 100175
Attachment 100176
Attachment 100177
Attachment 100178
Big thanks for info/measurements. But how about cutting back of case? So eg. non fan part of rad with tubing attachment holes is outside case (it won't change much looks as it's well .. back :) ) .. IIRC there should be some place for optional top PSU mount? And how about internal width of 5.25 bay enclosure? Can you measure that width of enclosure if it's wide enough to put 153mm wide rad in there or needs to be removed (I don't plan using any 5.25" devices anyway) + if possible, pics of top-back of this case from outside&inside?
P.S. There is another monstrous radiator out there (Watercool Mo-Ra 2 Pro, square form (424 x 385 x 54mm) 3x3 for nine 120mm fans which i considered at one point for installment on the side of case, even quieter and better cooling then gtx 560), or similar Phobya Xtreme NOVA 1080 rad, but most probably installing those will result in ugly looking side of case with fat bump outside dimensions). But in any case .. how wide(deep?) is compartment on the right side of case for cable management?
http://www.hwlabs.com/images/gtx/d_gtx560.jpghttp://www.coolputer.fi/tuotekuvat/1097.jpg
Hi churchy this rad I think this is difficult. Process also requires a five-inch side of the bayQuote:
Originally Posted by churchy
the inner bay is 5 inches 146.8mm.
I was set 15mm further back than normal
Attachment 100188
Attachment 100189
Inner 5.25 bay Front top
Attachment 100181
Attachment 100182
Attachment 100183
Attachment 100184
Attachment 100185
Well, seems i'll have to give up on this particular rad and use some 3x140mm or 4x120mm as one you used, as i am aiming to maximise cooling but still staying with everything mounted within case. Thanks for providing info, it will help me greatily with choosing components.
Arigato gozaimasu :)
P.S.
Pitty though. Almost none of current full tower cases by major vendors seem able to accomodate gtx 560. Maybe sometime in future in some next iteration of their cases ..
Churchy, well I have the PSU on top, I had to drill several rivets to get the roof off... but I use a Lian-Li PSU Extender too :)
I'm buying a new cam tomorrow so until then no pics unfortunately :)
That's how I got 2 Quad rads in the bottom compartment :)
Nice clean looking setup
Subscribed:up:
Quote:
Originally Posted by churchy
Quote:
Originally Posted by Garrett
veryvery Thanks:)Quote:
Originally Posted by scgt1
There are also some pictures here
I'm noeru:welcome:
どこに住んでますか？立派なマンションですね。そして、夜景はすごいです！
Beautiful build ;)
I like it very much :)
こんにちはAntioｃｈ何時もありがとう＾＾私の住んで居るのは東シナ海の見える高台です＾ ＾Quote:
Originally Posted by Antioch
都市圏ではないのです。
Attachment 100433
veryvery Thanks:)Quote:
Originally Posted by IgoRR
All I can say is AWESOME!!!! Just ordered my case based on yours alone....and cos you are extremely polite and answer everyone. Well done, great work....others should take note....
Hello Mansell0050 Thank you for watching my work;)Quote:
Originally Posted by Mansell0050
I learned a lot in ex ＾＾ i thanks ex all members .:)
what a beautiful build, and stunning apartment :)
just got my 800D today, if my build turns out half as nice as yours noeru, i will be happy.........and surprised lol.
congrats!!
Hi noeru! congratulations with the end result! Looks great.
Have a question. Dod you have anny alighning problems with the back slots of grafic cards? mine do not realy line up without forcing the back of the case inwards.
hello zigzag:) Please tell me if you can help:)Quote:
Originally Posted by zigzag
hello buccaneer Thanks for the questionQuote:
Originally Posted by buccaneer
But Sorry, my English is not enough power.:confused:
What is the back plate of VGA?
Attachment 100498
Attachment 100499
Attachment 100500
this"月光-GETUKOU-":D
Corsair Obsidian 800D Mid night BOOLD+
could i ask you what is the model of your jigsaw?Quote:
Originally Posted by noeru
hello insidertradingQuote:
Originally Posted by insidertrading
my jigsaw? jigsaw is BOSCH PST680EL
http://www.bosch.co.jp/jp/pt/products/model.asp?id=PST680EL
Well done ;)
thanks mate! does it really have laser line tracing?? i tried the whole of today to find one at my local hardware shops but coudnt!Quote:
Originally Posted by noeru
Nice work but... you should fix the edges of the rear fan hole. It cant be there like that, taking into account the good work you have done with the rest.
Tried to Gulftown EVGA-E760 in
Now it is a shame that we are not yet supported.
BIOS: 43:shrug:
Attachment 100878
Attachment 100879
Attachment 100880
Attachment 100881
Very clean work, I like it.
What you got a Gulftown how?
Damn nice .. good project , wish i had one , Portugal is always left apart :mad::rofl:
veryvery thanks:)Quote:
Originally Posted by Afrodisiac
Borrowed from a friendQuote:
Originally Posted by Raiden
ASUS P6T6WS or R2E or P6TDT is Work is good:up:
Very nice build noeru...many of those parts are very difficult to find here...you've had a lot of work putting this thing together, well done :toast:
Exceptional build from the land of the rising sun!
Are you from Tokyo, Noeru san?
Phil
veryvery thank miahallen, I'm glad you hung voice:p:Quote:
Originally Posted by miahallen
hello Philwong.:)Quote:
Originally Posted by Philwong
No No, I do you live in the southernmost island of Japan ^ ^ half of the island are U.S. Air Force and Navy bases. okinawa you live:D
Ohioguzimus! I'm from Singapore, but is a huge fan of Tokyo and Akihabara.Quote:
Originally Posted by noeru
Phil
AKB than where you live closer to me in Singapore :)Quote:
Originally Posted by Philwong
i'm AKB is not done only to a few times.:(
next project
I plan to add XSPC RX480 base. However, it has many problems.
・ Where the power
・Reservoir and pump
・ Single or dual loop
・Top 480x1 bottom 480x1 240x1 These air flow:confused:
Attachment 101085
Attachment 101086
Attachment 101087
Attachment 101090
Attachment 101091
I just don't think you can have it all, my friend.
Have you considered hanging it off the back? :X
hmm. Noeru: how about putting PSU on one of it sides and cutting out hole for it's air intake in case side wall (another option to locate it in front of case with power cord extention)? Then place side by side rad (it's hard to tell from these pics, maybe case middle section floor or case bottom needs to be cut for that .. (in both cases possibly strengthening of case structure needed?)). Probably few more hight can be recovered by taking out removable dust filters.
[edit]
hmm. or PSU in front of case, and rad laying on bottom of case? or PSU risen as much as possible till bottom of motherboard? but in such case it will suck warm air from bottom radiator. choices, choices :)
Quote:
Originally Posted by Wezly
yes Sure! To solve this problem is a custom I grow up? It is required, removal of Shadoubei bays＆5.25bays , PSU · SSD · HDD I think the aluminum panels and acrylic panels to create.Reworking of the side panel along ・ ・ ・ Umm:shrug:Quote:
Originally Posted by churchy
Bottm is TJ-07 Look? Rad 480X3?? (Bottom480x2 Top480x1):rolleyes:
Any progress to your project noeru ?
Hello, felix_w Thanks for watching:)Quote:
Originally Posted by felix_w
Now we are together.
"TFC Monsta Extreme Radiator 420" I'm looking for.
What meets the bottom of the TFC rad? How to supply side panels, suffering:(
Nice worklog! :up:
I noticed the most recent photos that the red in the loop is gone... did is breakdown or did you remove it?
:toast:
Quote:
Originally Posted by skinnee
Thanks skinnee:) We are slowly trying to change the color:)
We think:rolleyes:
5.25 Bay new even now remains is what should make installation OCZ. Due to its size
I think the best side panels of aluminum and acrylic rebuild.
Attachment 101853
Power supply will be placed where the white marked area is ?
And you gonna make new side panels for the 5.25" bay from acrylic ?
Thats what he's trying to say :DQuote:
Originally Posted by felix_w
Thanx, i just wanted to verify...:up:Quote:
Originally Posted by Antioch
i wish you luck with this noeru ;)
btw, can i ask you the dimensions of the top rad cut out please? I have the same bitspower grill coming and want to get cutting on my case :).
Very interesting location for the PSU noeru, I look forward to seeing more. :)
Why stop there? :D
Do dual XSPC's 480s, one each side! :shocked:
PFU Yes, I think the white portion of the inlet from the exhaust before the side panel.Quote:
Originally Posted by felix_w
Quote:
Originally Posted by Antioch
hi zigzag http://www.xtremesystems.org/forums/...d.php?t=238950Quote:
Originally Posted by zigzag
What is this? Bitos relationship with the size of the cut?
Hi charles_hQuote:
Originally Posted by charles_h
I'm glad of you interested in you! Thank you very:)
If you want to try 480x2+360 :up:Quote:
Originally Posted by noob eater4726
Hi Noeru! The length and width of your 480 cut out?? I have the same rad aswell, xspc 480. Was hoping to get a head start on the cuts before my bitspower grill arrives :)
You could do that, and it may even be easier to use one of the new antec psu that are 120mm high, and place the fan their. It would greatly simplify cooling.Quote:
Originally Posted by noeru
Although, I dont think they go up 1000w, but you may not actually need 1000w.
Another idea, is to use one or two rx360 instead. I think you have 572mm on the base to play with. The rx360 is 410mm, so that leaves 172mm to play with. It would still force you to get creative with psu mounting. You could either get a short psu and get very very creative, or fab a psu extender.
Or you could fab up a new psu case to work with that small ammount of space, just depends how comfortable you are with cracking open your psu.
Either way you have your work cut out for you. It's funny, no matter how big a case gets, you always can think of ways of where you just wish it was just a bit bigger.
Amazing build. btw
480x2 is now going to be a little further;)
980X in anyway:p:
Attachment 103284
Attachment 103478
intel i7 980X 5027.4MHz Water cooling :up:
EVGA X58 SLI Classified 141-BL-E760-A1
Corsair TR3X6G2000C8GTF-DOMINATOR GT 2Gx3
GeForce GTX295x2 Quad SLI
Intel X25-M Mainstream SATA SSD SSDSA2MH080G2C1x2 raid0
HGST/HTS723232L9A360x2
Corsair Obsidian 800D BLOOD+
OCZ Z Series Gold 1000w Power Supply
how did you manage to put the RX240 sideways at the bottom ?
once I put it in , I can not turn it around as its too thick
?????
helo Omarko:)Quote:
Originally Posted by Omarko
RX240 is I had a hard time;)
Remove the center plate rivets work is easy.Fan and stopped in, you must work under the mouth:)
Attachment 103534
Attachment 103535
Attachment 103536
Attachment 103537
Attachment 103538
Take some pix of your dachsund! He's so damn cute.
Noeru, great work! you have greatly inspired me on my first water cooled system. I am also using the i7-980x. Obviously the lower the better, but in your opinion (or anyone who could ring in on this) what would you consider the highest core temps you would feel safe for a 24/7 overclock (assuming stable)?
Currently I'm @ 4.3 GHz. I haven't run any overnight tests yet, but after 10 minute small FFT torture tests, my hottest single core temp maxed at 77 at some point, but running average of all six is 72.
And when running Prime95 torture test, which is it best to run? Small FFTs (ram not tested much), In-place large FFTs (max heat, some ram tested), or Blend (lots of ram tested)?
Now get it crunching! :cord:
No but really amazing job! :up: I think a 480 rad will be pushing it alittle eh?
P.S. get it crunching ;) that thing would be a beast at wcg :yepp:
HI
Amazing project dude.
Can u just tell me , is that a conector witch are in the midle of the 1 gt295 and the second, or is a junction of males and females conector?
if its a conector can u just give me the exact name?
I love it,, the look man..
Congratzz :up: