EP45-UD3P Benches 3D at 670mhz+ FSB

Printable View

Show 100 post(s) from this thread on one page

10-12-2008, 08:48 PM
hicookie

hmm ,many ppl curios about quadcore. i will update my simple results later ...preparing hardware now..lol
10-12-2008, 09:24 PM
hicookie

540mhz FSB of QX9650 passed 3Dmark06 now, just like my e8500 , not specially pick
10-12-2008, 09:29 PM
dinos22

540MHz FSB
faints
10-12-2008, 09:54 PM
TheGoat Eater

my god man - that is sick - way to go m8
10-12-2008, 09:55 PM
revogamer

woahh, wat settings?
10-12-2008, 09:56 PM
hicookie

upload the pictures,
a simple testing run, with QX9650, just random picked one
i boot 520FSB directly, tested 530 okay too, then 540mhz can stably
pass 3Dmark06 with Quadcores.
card was 3850CF, just default setting , don't care that, for this run just testing
how much FSB can stably pass 06

540MHZ FSB of QX9650 Passed 3Dmark06 with Quadcores
and 2:4B ratio, DDR2-1300
http://img171.imageshack.us/img171/3845/540uh6.png
10-12-2008, 09:58 PM
revogamer

woah that pwns!! that would do wonders for my Q9550
10-12-2008, 10:06 PM
dinos22

who knows with a bit of tweaking maybe we will see 550/560 even eeeek
10-12-2008, 10:09 PM
hicookie

Quote:

Originally Posted by dinos22

who knows with a bit of tweaking maybe we will see 550/560 even eeeek

yup, sure, still have some space
just a simple run , now i need to work ..:)
10-12-2008, 10:12 PM
saaya

damn, very nice man! :toast:
10-12-2008, 10:16 PM
dinos22

now we need a ddr3 board to perform like that and w00000t this will be sweet as hehe
10-12-2008, 10:33 PM
CryptiK

Doesn't look to bad, 540 3D stable on a quad is nice. If the VRM is good for 180 Amps, it can handle a QX9650 at 4.4GHz with a bit to spare, so that seems ample unless you want more than 4.4 on a quad, for example a qx9650 at 4.6GHz would be above the 180 Amps max.
10-12-2008, 11:23 PM
hicookie

Quote:

Originally Posted by CryptiK

Doesn't look to bad, 540 3D stable on a quad is nice. If the VRM is good for 180 Amps, it can handle a QX9650 at 4.4GHz with a bit to spare, so that seems ample unless you want more than 4.4 on a quad, for example a qx9650 at 4.6GHz would be above the 180 Amps max.

try this one, EP45-extreme uses same ICes of PWM with EP45-UD3P
all are 6 phases, EP45-extreme can pushed my 9650 to 5.7G quad, i think
that's not far to DU3P, or even better.:)

http://img412.imageshack.us/img412/1633/57wg2.png
10-13-2008, 05:38 AM
Solid Snake

GOOD !!!!

a little more and 20,000 marks :clap:

congratulations man !!!:up:
10-13-2008, 05:48 AM
Gautam

How's the cold bug?
10-13-2008, 08:56 AM
stasio

EP45-UD3P Bios detail released:
HERE
10-13-2008, 10:47 AM
OC4/3

540FSB 3dm06 stable is just mighty impressive:up:
10-13-2008, 11:12 AM
hicookie

Quote:

Originally Posted by stasio

EP45-UD3P Bios detail released:
HERE

woa, thats a very great interactive way to look all the bios settings :up:
10-13-2008, 11:28 AM
MACMAC

Quote:

Originally Posted by dinos22

now we need a ddr3 board to perform like that and w00000t this will be sweet as hehe

Seconded.

With DDR3 prices taking a dive it would be nice to see a new DDR3 mainstream mobo, perhaps as a replacement for the EP45T-DS3/R.
10-13-2008, 08:19 PM
Kain XS

is there anything special on any slots? or am I too ASUS/DFIed haha?
10-13-2008, 11:50 PM
saaya

Quote:

Originally Posted by Pt1t

:lol: , I Cant put 1.5v to my E8600 in air. It needs only 1.26v for 4.5ghz and 80° full loaded. I will try a QX.

whaaa what heatsink? :lol:
10-13-2008, 11:53 PM
Pt1t

Quote:

Originally Posted by saaya

whaaa what heatsink? :lol:

Tuniq tower 120 :D
10-14-2008, 12:07 AM
I34z1k

Has anyone else been able to produce results this sick?

Just curious cause we've only seen one these boards that can do 650+ so far
10-14-2008, 01:47 AM
saaya

Quote:

Originally Posted by Pt1t

Tuniq tower 120 :D

is it normal that they get this hot? damn....
how are you reading temps? :D

Quote:

Originally Posted by I34z1k

Has anyone else been able to produce results this sick?

Just curious cause we've only seen one these boards that can do 650+ so far

hicookie is good :D
10-14-2008, 01:49 AM
I34z1k

Exactly :P I am looking for a decent, cheapish board that can 32m around 600fsb and I'm not sure just anyone would get this one that high :P
10-14-2008, 02:14 AM
dinos22

Quote:

Originally Posted by I34z1k

Exactly :P I am looking for a decent, cheapish board that can 32m around 600fsb and I'm not sure just anyone would get this one that high :P

600 = should be blindfolded easy i reckon lol

benny has been benching at 620MHz 3D
10-14-2008, 02:22 AM
Pt1t

Quote:

Originally Posted by saaya

is it normal that they get this hot? damn....
how are you reading temps? :D

hicookie is good :D

Yes , it s normal. It s an extreme Hot CPU !!!
10-14-2008, 02:23 AM
Pt1t

Quote:

Originally Posted by dinos22

600 = should be blindfolded easy i reckon lol

benny has been benching at 620MHz 3D

me 2 , 610 3D on air, but my E8600 is too hot to get more fsb on air. (610 3D , 640screen.) And 680 1M under cold ... more test are coming.
10-14-2008, 04:44 AM
OCX600RR

Mine just came in today...just don't have a CPU to test with LOL. Anyone mind sending me one of those nice QX9650's for a week or so???:D
10-14-2008, 04:49 AM
NBF

Quote:

Originally Posted by hicookie

upload the pictures,
a simple testing run, with QX9650, just random picked one
i boot 520FSB directly, tested 530 okay too, then 540mhz can stably
pass 3Dmark06 with Quadcores.
card was 3850CF, just default setting , don't care that, for this run just testing
how much FSB can stably pass 06

540MHZ FSB of QX9650 Passed 3Dmark06 with Quadcores
and 2:4B ratio, DDR2-1300

Is this 540fsb test all on air? :shock2:
10-14-2008, 06:37 AM
I34z1k

Sheeesh then this IS the board for me :D Thanks alot guys ;)
10-14-2008, 10:14 AM
Bellisimo

i think we are gonna see a lot of 2oz boards coming in the next months :)
10-14-2008, 04:16 PM
OCX600RR

Any quad tests anyone? I'm now thinking either Q9450 ($249) or E8400 E0...really can't make my mind up. We know this board rocks with the duallies, I would love to see some tests with quads.

Edit: Nevermind saw the QX9650 test a page before this. Awesome stuff there, now I'm really confused!
10-14-2008, 05:50 PM
bigslappy

Quote:

Originally Posted by OCX600RR

Any quad tests anyone? I'm now thinking either Q9450 ($249) or E8400 E0...really can't make my mind up. We know this board rocks with the duallies, I would love to see some tests with quads.

Edit: Nevermind saw the QX9650 test a page before this. Awesome stuff there, now I'm really confused!

get the Q9650 it's well worth the extra cash

it o'c's better than any of the QX's

even my QX9770 & runs WAY COOLER to boot ! & i've got both on water
i'll post my benches when i get the board i'll do both the Qx9770 & the Q9650 with a 4870X2
10-14-2008, 06:32 PM
systemviper

1 Attachment(s)

Hi, i thought this board was a DDR2 board but it is confuzing, it says different things in different places... Plus the pic below makes mez think it's DDr3....

I was hopping ddr2 since i got me lotz....
10-14-2008, 06:43 PM
dinos22

yes its ddr2

there is still a bug in memset and CPUz reading them as DDR3
10-14-2008, 07:20 PM
systemviper

BAM, Just ordered it from the egg for 136.00
and then you get a 20.00 MIR
so in the end the board is only 116,
you got to love that.... :woot:

Have some Dominator DDR2 1250 (PC2 10000) and some Redlines I want to play with... :surf:
10-14-2008, 07:28 PM
dinos22

wow good times man :cool:
10-14-2008, 08:24 PM
OCX600RR

Nice man, I know I missed that deal. I got it for $129.99 free ship. Oh well, this board looks so much better in person I LOVE IT!

http://img524.imageshack.us/img524/5877/87202741oo9.jpg
10-14-2008, 08:34 PM
saaya

wow thats a lot of stickers :lol:
10-14-2008, 08:35 PM
dinos22

lol no :banana::banana::banana::banana: heheheh
10-15-2008, 08:07 AM
Devious

Looks an amazing board, i really need to get my Q9650 to 500fsb. Ive tried maximus formula and P5Q Deluxe so far and both wont go above 470 stable. Cpu has so much more to give but lacks fsb.

I want to order this but im slightly skeptical until i see some 'regular' users hit the high fsb with a quad.
10-15-2008, 11:33 AM
ioGLNX

I got a strange issue.
When I set a MCh Voltage over 1.24V e.g 1.26V the board will not boot in proper way.
It reset all to default, if I set 1.24V everthing is fine though.

What is going on ..any clue?
10-15-2008, 12:06 PM
Revv23

Are the UD3P and UD3R boards the same in terms of OC performance?
10-15-2008, 06:27 PM
saaya

p and r are just different versions of the board with raid or some other feature i think?
so they should clock the same...
10-15-2008, 06:46 PM
dinos22

inthe past there was more than just different features that were different and P always used to be their best board

i dont know if this is still the case though
10-15-2008, 07:43 PM
OCX600RR

AFAIK the R only has one PCI-Express 2.0 slot, but other than that I'm not too sure what else is different between the two.
10-15-2008, 08:50 PM
[XC] gomeler

Should have one of these here very soon! Have a set of handpicked 8888C4 dominators just begging to be blown up so I'm hoping this board will be a good match with my 6500MHz E8600 :D

Quote:

Originally Posted by Pt1t

:lol: , I Cant put 1.5v to my E8600 in air. It needs only 1.26v for 4.5ghz and 80° full loaded. I will try a QX.

Measure the IHS with a k-type probe. If you are testing with Core Temp then there's a good chance your diode is reading all whack. Mine reads 17C and 19C on the cores at stock and idle in a ~30C ambient room but reads 85C with 1.35v at 4500MHz :D IHS was only around 50C if I remember correctly, need to find the sheet of results.
10-15-2008, 08:51 PM
dmspawn

Hi,

the UD3R has no Ultra TPM and only Single LAN... 1 less PCI
10-15-2008, 08:59 PM
Pt1t

Quote:

Originally Posted by [XC] gomeler

Should have one of these here very soon! Have a set of handpicked 8888C4 dominators just begging to be blown up so I'm hoping this board will be a good match with my 6500MHz E8600 :D

Measure the IHS with a k-type probe. If you are testing with Core Temp then there's a good chance your diode is reading all whack. Mine reads 17C and 19C on the cores at stock and idle in a ~30C ambient room but reads 85C with 1.35v at 4500MHz :D IHS was only around 50C if I remember correctly, need to find the sheet of results.

i cant, i killed it yesterday :(
10-15-2008, 09:01 PM
dinos22

what
you killed that nice E8600 asswipe eeeeeek
someone slap Thomas quick
10-16-2008, 07:36 PM
Brian y.

@hicookie

CPU PLL @1.81v?:confused:

What CPU/NB skew did you use for that 3D run?
10-16-2008, 07:42 PM
[XC] gomeler

Quote:

Originally Posted by Pt1t

i cant, i killed it yesterday :(

:ROTF: Ish happens, it's a good thing they are relatively cheap. Kill it sub-zero or on air?
10-16-2008, 11:48 PM
Pt1t

Quote:

Originally Posted by [XC] gomeler

:ROTF: Ish happens, it's a good thing they are relatively cheap. Kill it sub-zero or on air?

sub 100 and after air :rolleyes: , good thing ... RMA accepted, now i hope new one will be as good as my dead chip.
10-17-2008, 09:41 AM
redratamd

EP45-UD3P @home :)
10-17-2008, 10:13 AM
[XC] gomeler

Quote:

Originally Posted by Pt1t

sub 100 and after air :rolleyes: , good thing ... RMA accepted, now i hope new one will be as good as my dead chip.

I hope for the best. Maybe you'll get a 6500+MHz chip :yepp:
10-17-2008, 10:47 AM
Pt1t

Quote:

Originally Posted by [XC] gomeler

I hope for the best. Maybe you'll get a 6500+MHz chip :yepp:

my chip was +6500 chip :(
10-17-2008, 12:04 PM
[XC] gomeler

Quote:

Originally Posted by Pt1t

my chip was +6500 chip :(

k I hope you get a 6600+MHz chip :D
10-17-2008, 12:12 PM
PPInDaHouse

This board looks really nice, can't wait to test one :D
10-18-2008, 08:35 AM
redratamd

I can't take more 600MHz for Spi 1M :( But easy boot with the memory on Cas 4 with 5:6 .
10-18-2008, 01:38 PM
Gautam

I can't even enter Windows at 500, and 450MHz randomly BSODs on two different E8600's.

I really hope there's something (very) stupid I'm missing.
10-18-2008, 06:14 PM
Brian y.

Quote:

Originally Posted by Gautam

I can't even enter Windows at 500, and 450MHz randomly BSODs on two different E8600's.

I really hope there's something (very) stupid I'm missing.

I had same exact issue.

Setting CPU Clock Drive to 800, PCIe to 900 & CPU clock skew to 200 allows me to boot up to 550 but is maxed out at 600FSB.

I have had poor performing FSB wise mobo's before such as the Biostar T45 and DFI Dark and after rma'ing them both was blessed with some FSB monsters. Looks like I am going to have to do the same with this one.
10-18-2008, 09:09 PM
bigslappy

any one know what water blocks work on the mosfits & chipsets on this MoBo ? I know the EK Asus3a looks to fit the mosfits
10-18-2008, 09:14 PM
road-runner

Quote:

Originally Posted by bigslappy

any one know what water blocks work on the mosfits & chipsets on this MoBo ? I know the EK Asus3a looks to fit the mosfits

I have a dtek fuzion, not the new one on a P45 DS4P and a Dtek fuzion with pro mount on the P45 UD3P also not the new one...
10-18-2008, 09:16 PM
Gautam

Quote:

Originally Posted by Brian y.

I had same exact issue.

Setting CPU Clock Drive to 800, PCIe to 900 & CPU clock skew to 200 allows me to boot up to 550 but is maxed out at 600FSB.

I have had poor performing FSB wise mobo's before such as the Biostar T45 and DFI Dark and after rma'ing them both was blessed with some FSB monsters. Looks like I am going to have to do the same with this one.

Thanks, I'll give it a shot. I've always been FSB challenged. :p:
10-19-2008, 02:59 AM
MACMAC

500Mhz @ 1.24V HyperPi 32M & 3D stable
525MHz @ 1.30V HyperPi 32M & 3D stable
550Mhz is hit & miss in H-Pi 32M, haven't really found the trick...voltage isn't it :D

Looks like some finesse is called for with this board.
10-19-2008, 03:44 AM
Devious

So looking at the general results we can assume the initial posts were on cherry picked hardware.
10-19-2008, 03:58 AM
antoine76

Quote:

Originally Posted by Brian y.

I had same exact issue.

Setting CPU Clock Drive to 800, PCIe to 900 & CPU clock skew to 200 allows me to boot up to 550 but is maxed out at 600FSB.

I have had poor performing FSB wise mobo's before such as the Biostar T45 and DFI Dark and after rma'ing them both was blessed with some FSB monsters. Looks like I am going to have to do the same with this one.

Try with more vFSB (vtt) ;)
10-19-2008, 04:40 AM
MACMAC

Ok, since I was having more luck in 3D than SPi I decided to go that route, it's looping 3DMark2001 at 600Mhz 1:1 PL11 S.C with 1.56 vNB

Not too pleased with the PL11, but should be able to lower it back down to PL 10 with some fine tuning.

Once above 500Mhz, the board auto sets 1.60VTT and 1.86PLL...might be overkill :D
10-19-2008, 04:55 AM
PPInDaHouse

1.86vpll looks too high for aircooling :rolleyes:
10-19-2008, 05:02 AM
Pt1t

http://valid.x86-secret.com/show_oc.php?id=432489

it was the last test of my burned E8600 , VTT 1.55v ,vNB 1.6v. PL10
10-19-2008, 05:04 AM
PPInDaHouse

Quote:

Originally Posted by Pt1t

http://valid.x86-secret.com/show_oc.php?id=432489

it was last test of my burned E8600 , VTT 1.55v ,vNB 1.6v. PL10

what cooling?
10-19-2008, 05:09 AM
HousERaT

What bios are people using F4 or F5A?
10-19-2008, 05:17 AM
Pt1t

Quote:

Originally Posted by PPInDaHouse

what cooling?

2 stages cascade.... 650*9 run before to try x10 ... But now cpu rip.

it was 3d stable .
10-19-2008, 05:26 AM
PPInDaHouse

Quote:

Originally Posted by Pt1t

2 stages cascade.... 650*9 run before to try x10 ... But now cpu rip.

it was 3d stable .

you mean 650x10 3D stable? that was nice, hope you can get a similar or better one :)
10-19-2008, 06:02 AM
Pt1t

Quote:

Originally Posted by PPInDaHouse

you mean 650x10 3D stable? that was nice, hope you can get a similar or better one :)

X9 stable

i tested in X9 before to test in X10 under ln2 :(
10-19-2008, 06:31 AM
massman

Quote:

Originally Posted by Pt1t

http://valid.x86-secret.com/show_oc.php?id=432489

it was the last test of my burned E8600 , VTT 1.55v ,vNB 1.6v. PL10

I guess the VTT caused your chip to die :eek:
10-19-2008, 07:00 AM
boblemagnifique

Quote:

Originally Posted by massman

I guess the VTT caused your chip to die :eek:

No it's a Bug Vcore (1.8v bios -> 2v real) , after in air (same with the clear mos) -> 1.8v Vcore -> E86 dead :(
10-19-2008, 07:16 AM
Oliver

sounds wicked, but 1.55VTT is ya like Pieter says
10-19-2008, 09:32 AM
Kain XS

I still haven´t had any problems using very high PLL and VTTs with Gigabyte Boards.
Mine can do 615 Max only for suicide shot.
600 is possible but not for 3DMark.
Stable for all kind of benching goes around 560 only.

Maybe Im missing something.
Memory BTW is good. I´ve got 700MHz with Team Group which I couldn´t with any mobo before.
10-19-2008, 09:34 AM
surrealX

Fantastic FSB. Nice job
10-19-2008, 09:37 AM
T_M

VTT had nothing to do with the failure of the CPU.
It was a plain and simple vcore bug that pumped waaaay too much volts into the chip while it wasnt cold.

1.55VTT is child's play compared to what i run
10-19-2008, 09:40 AM
Pt1t

Quote:

Originally Posted by T_M

VTT had nothing to do with the failure of the CPU.
It was a plain and simple vcore bug that pumped waaaay too much volts into the chip while it wasnt cold.

1.55VTT is child's play compared to what i run

sure ... this chip took 1.75 vtt on EP45Textreme, here it s different, it s only caused by high vcore en air.
10-19-2008, 01:47 PM
dinos22

VTT did not kill your chip
it was vcore
10-19-2008, 01:50 PM
dinos22

Quote:

Originally Posted by boblemagnifique

No it's a Bug Vcore (1.8v bios -> 2v real) , after in air (same with the clear mos) -> 1.8v Vcore -> E86 dead :(

same board or a different board

it's probably just a lemon board :shrug:
10-20-2008, 04:51 PM
[XC] gomeler

Been struggling with this board for the last hour or so. I can get 525FSB to post with my golden E8600 but anything above that is an instant crash. Can you guys doing 600FSB tell me the following?
CPU/MCH Skews?
FSB holes?(I think 400-433 is bugged, never boots for me)
MCH Latch used? 333MHz is proving to be far more stable than 400MHz
Performance Enhance used? Turbo(default) works better than Disabled or Extreme

I'm using 6x multi and the following volts on the QX9650 cooler. This CPU was doing 600+FSB with the EP45T-Extreme on air and the memory does DDR2-1240 CAS4 so I assume it must be the board.

vCore: 1.30v
vMCH: 1.50v
vDIMM: 2.10v
10-20-2008, 11:10 PM
Benny Lodewijk

Quote:

Originally Posted by [XC] gomeler

Been struggling with this board for the last hour or so. I can get 525FSB to post with my golden E8600 but anything above that is an instant crash. Can you guys doing 600FSB tell me the following?
CPU/MCH Skews?
FSB holes?(I think 400-433 is bugged, never boots for me)
MCH Latch used? 333MHz is proving to be far more stable than 400MHz
Performance Enhance used? Turbo(default) works better than Disabled or Extreme

I'm using 6x multi and the following volts on the QX9650 cooler. This CPU was doing 600+FSB with the EP45T-Extreme on air and the memory does DDR2-1240 CAS4 so I assume it must be the board.

vCore: 1.30v
vMCH: 1.50v
vDIMM: 2.10v

Just leave all auto in the BIOS. I can bench FSB 600 Mhz with ALL AUTO setting in BIOS.
10-21-2008, 12:10 AM
ezaleina

did anybody try Oc using e8400 E0 stepping?
10-21-2008, 12:18 AM
bigslappy

Mine went back for RMA to EGG .. could NOT hold any volts , clock, FSB with any consitensity , under clocked the Q9650 no matter what & yes I turn off all the CPU throttling settings , even ran everything on auto & still was the sh*t , swapped out 3 different types of RAM , 3 different vid cards , even swapped the PSU ... would not enter O/S at 400 FSB & when it did get into windows the clock kept changing every 60 seconds up/down NewEGG rma's gonna refund the mobo & i ordered another . I get it wed. OR thursday............
10-21-2008, 01:41 AM
taz-nz

Has anyone tried fitting Thermalright HR-09 Mosfet Coolers to this board yet ?

http://www.thermalright.com/new_a_pa...s/image004.jpg

If not can someone please measure the base plate width & length of the mosfet heatsink on the top edge of the board, and any clearance gap between the base of the heatsink and the chokes.

thanks
10-21-2008, 01:43 AM
Devious

Quote:

Originally Posted by bigslappy

Mine went back for RMA to EGG .. could NOT hold any volts , clock, FSB with any consitensity , under clocked the Q9650 no matter what & yes I turn off all the CPU throttling settings , even ran everything on auto & still was the sh*t , swapped out 3 different types of RAM , 3 different vid cards , even swapped the PSU ... would not enter O/S at 400 FSB & when it did get into windows the clock kept changing every 60 seconds up/down NewEGG rma's gonna refund the mobo & i ordered another . I get it wed. OR thursday............

Mine arrived today to try with my Q9650. Im thinking i might just send it back as no one except hicookie is having any luck with a quad.

Are there any package seals to break if i was to have a quick play?
10-21-2008, 02:25 AM
hicookie

Quote:

Originally Posted by bigslappy

Mine went back for RMA to EGG .. could NOT hold any volts , clock, FSB with any consitensity , under clocked the Q9650 no matter what & yes I turn off all the CPU throttling settings , even ran everything on auto & still was the sh*t , swapped out 3 different types of RAM , 3 different vid cards , even swapped the PSU ... would not enter O/S at 400 FSB & when it did get into windows the clock kept changing every 60 seconds up/down NewEGG rma's gonna refund the mobo & i ordered another . I get it wed. OR thursday............

how come even can't just 400MHz FSB?hmm...whats ur memory?
10-21-2008, 04:01 AM
systemviper

i got my QX6850 to 503fsb @ 1.39v 4Ghz, i got my 2nd Q9650 so i will pop that in today and see if i can get higher FSB.

CPUz
10-21-2008, 04:12 AM
cstkl1

isnt that 3dmark06 score kindda low..
could have sworn that i got higher with 790/1100 on a gainward GS 1gb 4870 at 4.264ghz..
10-21-2008, 04:27 AM
systemviper

Quote:

Originally Posted by cstkl1

isnt that 3dmark06 score kindda low..
could have sworn that i got higher with 790/1100 on a gainward GS 1gb 4870 at 4.264ghz..

Hi, u talking to me' :shrug:

If so 20k with a 3870x2 is sweet..... :up:
10-21-2008, 04:49 AM
cstkl1

oops sorry i meant to TS.
10-21-2008, 05:24 AM
[XC] Hicks121

I have mine running 460 x 9 on my e8400. Will have a x3330 here this week to test.
10-21-2008, 08:38 AM
[XC] gomeler

Quote:

Originally Posted by Benny Lodewijk

Just leave all auto in the BIOS. I can bench FSB 600 Mhz with ALL AUTO setting in BIOS.

All settings including voltages? I left everything on auto but the memory divider(it was trying to do DDR2-1800 :ROTF:) and I can still only do 525FSB.
10-21-2008, 08:57 AM
bigslappy

Quote:

Originally Posted by hicookie

how come even can't just 400MHz FSB?hmm...whats ur memory?

G.Skill super PI f2-8800cl5d-4gbpi = ddr21100 (tried 4 gb & then 8 gb of each) & g.Skill ddr2-1066 & ddr2-1000 both 2 gb a stix no change on the the board with any of them , ALL still acted the same on the mobo .. dod memory test on all they passed & all worked fine on my Rampage Formula mobo's ... moBo was just not acting right from the start
10-21-2008, 02:26 PM
Devious

Installed a UD3P tonight and at last ive managed to boot at 500FSB with my Q9650 which i couldnt get near with my Asus boards. (booted @ 515x6)

Ive left nearly everything on auto in the bios (which i read most people were doing) which imressed me but then ive just installed easytune and looking at that its raised some of voltages to scary levels:eek: which probably explains the 500FSB.

http://img205.imageshack.us/img205/8094/capturedf8.jpg

Its not stable at all, it will run prime small FFT for a few mins before BSOD but blend fails instantly.

Is this a cpu wall or some ram issue ? Im running 4GB OCZ flex 9200 ram.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 07:15 AM.

XtremeSystems