yea where did u order it from, almost everyone have them, unless u live outside the U.S
Printable View
yea where did u order it from, almost everyone have them, unless u live outside the U.S
Actually my first few test runs were using ORTHOS blend and Prime 25.3 and I stopped them both at the 9 hr mark when I got back from work a few days ago. then someone asked me to do an ORTHOS small fft's and I did this run last night. Mine is rock solid stable no matter what stress proggy I run (SO FAR). I will start to increase my FSB to try and tweak for 4.0 GHZ on air over the weekend as my Delta to T is around 15c (that is assuming that intel specs are, 100 tjuntion instead of the reporting 85 on coretemp) I have about 11 more degrees that I might be able to play with before throttling begins. hopefully luck is on my side :up:Quote:
Originally Posted by NKD
well so far running for about 10mins at 4g, will update periodically, i havnt touched the vcore, i have seen on my board, as i up the FSB, more VTT voltage becomes available, 3950 i upped it to 1.41, and at 4G i turned the vtt up to 1.45, and i didnt touch the vcore at all, vtt voltage seems to help alot. vtt voltage on ip-35 pro seems to doing miracle so far. yea ur right no matter what stress program u use, if its stable on etiher one ur computer wont crash. because i dont think anything out there will nearly stress ur computer like either of these.
before i had the vcore at 1.67 and tried to run 4ghz and it would restart within two minutes.
http://img233.imageshack.us/img233/5531/4ghzcs0.jpg
I'm running 12sec on 1M Spi. You might want to try and tweak your ram a bit more to lower your Spi score time.Quote:
Originally Posted by NKD
I'm running CMD RATE 1T on my ram. You might want to try that.
Good luck
Hlo..
Quote:
Originally Posted by hlonipha
well i am waiting for the corsair dominators, my ram has issues with tighter timings and sometimes i start getting c1 errors, but as long as leave the timings loose it works fine, though this ram worked great with my evga 680i( filled with problems) board. i could run this ram at 4-4-4-12 up to 960 on my evga board, i am getting the dominators cuz they are listed as fully compatible with the boards. my board wont let me run at 1t there is no option available, however the new beta lets u choose what speed u want to run it at, but this bios is perfectly stable for me, and when they release the final version i will update. but my ram is rated only at 2t i havent tried 1t yet but i dont think that will work.
i will try tightning the ram timings after i find the max stable overlock at this vcore. so far 4.0ghz is looking good.
30min stable at 4GHz and counting.
http://img178.imageshack.us/img178/5...nstablejj9.jpg
i cna't get my memory to run at 1200 i know it can do it cause i used to run i ta t that on my P5N32-E with 2.150 v and never had issues anything over 1000 i can get it stable any suggestions
http://mobiletech.pointclark.net/1.JPG
i tried tighter timings and my computer restarted after 45minutes, and i loosen the timings a bit and its been priming now for about 2 hours. i am running my pc2-6400 in 1:1 ratio, thats why i have to loosen the timings, i am waitings for the dominators which is listed as fully compatible with my mobo, and so i can run it 1:2 and release some pressure on the northbridge and tighten up those timings.
my final speed that i will be running 24/7 is 3950, my memory seems to have issues anything higher than that, once i got it stable at 4ghz for about 4 hours prime stable, once 2 hours but i get random reboots, i think the max my memory can do is what is does at 3950, cant wait till i get my dominators so i can shoot for max fsb
Thats a great 24/7. I am on water too and i'm 90% sure my 24/7 will be 4000 1.575 bios 1.56 windows 1.53 loaded. 50-55c loaded.Quote:
Originally Posted by NKD
My next toy .. Just got the good news a few minutes ago. I want a L723A for this too...
http://img484.imageshack.us/img484/3351/6600uz6.jpg
Quote:
Originally Posted by NKD
You jsut gave everyone ur serial for windows..h0w do you feel?
its alright didnt pay for it. LOL.
hardwareversand.deQuote:
Originally Posted by bro20000
E6850 will be my next cpu........
4 GHz Primestable :D
1.464 Volt
http://pics.mwirths.de/pics/thumb/e6...9b016_4000.jpg
stepping/batch code?Quote:
Originally Posted by webwilli
you really should look at the screenshot again i think ;)
You definitely have a good chip. I wouldn't consider 2hours prime stable though. I was 2 hours at same voltage but consistently failed after 4hours or so. I'm now 8+ hours at 1.575 bios, 1.56 windows 1.54 loaded. L723A.Quote:
Originally Posted by webwilli
you should also try Small FFTs test ;)
but still it's definitely a good chip
my L719B174 runs at 3900@1.4V but i have my FSB wall around 500FSB (it's an E6750) so i can't get 4G stable :'(
Here's the results of my first morning with mine.
And before you ask, NO it's not Orthos stable.:ROTF:
http://img.photobucket.com/albums/v5...perpi4140c.jpg
finally got my dominators, trying 2000FSB right now. running prim for 10 mins and on. will update if its stable or not.
http://img482.imageshack.us/img482/1...0mhzfsbft5.jpg
half an hour so far at 500fsb
http://img230.imageshack.us/img230/2...0mhzfsbvp6.jpg
1 and half hour at 500fsb
http://www.imagehosting.com/out.php/...00fsb2hour.JPG
Does this have any significance? Not knowlegable about benching, but I know Lost planet is amazing on this system.
http://i75.photobucket.com/albums/i304/scwam/12.093.jpg
i am able to get my ram stable at 1000mhz with 4-4-4-9, it was tested with memtest at those settings. this was done at cpu speed 3979 with the above memory timings and with 497fsb=1988.
http://img218.imageshack.us/img218/7202/spimh5.jpg
I've found my 24/7 OC for this L723A E6850. EVGA 680i 1.55v Bios, 1.53v Windows, 1.50v Loaded. 50-55c Loaded.
http://img294.imageshack.us/img294/1562/untitleddn7.jpg
Little better.:)
http://img.photobucket.com/albums/v5...perpi4212b.jpg
is this ur 24/7 OC, i highly doubt it unless ur running some extreme cooling or u have voltage to like 1.8v, but any how he was saying thats his 24/7, i know its better.Quote:
Originally Posted by Peepaw
can u post ur settings, i can get 3950 24/7 prime stable, i have the vcore to 1.53 loaded, but i cant break 4GHZ, i can get it stable 2 hours and thats it, i can up the voltage but it doesnt seem to help, i am happy with 3950, cuz there is no differecne that i will ever see between 3950 and 4000, but 4 GHz just looks sweet, lol.Quote:
Originally Posted by nugzo
i wish i could run my ram in unlinked mode and at the speed i wanted, but i can with my ip-35 pro, never mind u have a 680i and i have a p35 so only setting i could rely on is vcore.
1.55 vcore in bios. If i'm not mistaken, your chip is a L722A right? My L722A stopped where yours did unless i upped voltage to 1.675. Temps were acceptable but too much voltage to be comfortable with. I hope i get a L723A tomorrow on one of my quad G0's. :up:Quote:
Originally Posted by NKD
yes its L722A yeah i am ok with 3950 max with 1.53 loaded, that much voltage doesnt make sense for 50mhz.
I wasn't saying mine was a little better than his. I was refering to my post a few back, twas a little better.:)
I've got it real stable at 3800, and so far it's been me that wants to quit, not the chip.
I did the 4212 on 1.625 vcore but that wasn't real stable. Increasing vcore to 1.6375 made it stable enough to do some benching. I believe at 1.65 it would be stable enough to run orthos.:D
thats good, same here i have gotten it max stable at 1.53v loaded, i can boot at 4.2 but i just cant get it stable no matter what voltage i apply. i have quit at 3950, though after that i tried 4ghz but failed after two and half hours, where 3950 ran for 24 hours with prime. i might try 3975, but i am happy with 3950, 4ghz is not worth the time and stress.
NKD: Me and Peepaw are having a little e-competition, that's all.
Under 12 seconds....bring it on cascade! (disclaimer: I don't claim any stability at this speed)
http://i75.photobucket.com/albums/i3...m/ultimate.jpg
good to know, i will be spectatingQuote:
Originally Posted by scwam
All the guys over 4.0GHz and higher are you 3DMARK06 stable?
yes. i just ran 6 loops per test. scored 13,450.Quote:
Originally Posted by Lu(ky
I think my 6850 is stable between 4 to 4.1. But I've not tested it or had it long enough to run it through loops. I know I'm 3850 stable on dual burn (air) so far.
i have mine 3970 stable on water, at 1.53 loaded, 4ghz just wont do even with voltage increase, i am sure i could get it stable at 1.65 or so, but not worth the temps for 25-30 more mhz.
my 3dmark06 is 13778, i have the same ultra like urs, the msi one, but i flashed it with xfx ultra bios the xxx edition, it has never crashed or anything for the last 3 weeks, 24/7 loop of 3dmark06 and hours and hours of gaming, its even worked flawless at 685 but anything above i start getting artifacts, may be with a better cooler i could get more.
That's strange. My system responds to voltages pretty well. Seems to do stock up to 3650, about 1.4 up to 3750, 1.45 up to 3825 or so. and 1.505 at 3880. It's past the 3880 that I get limited 10 to 50 minutes burn runs at any higher voltage. Seems to responds up to 1.6 but temps error it out after 65c or so. I have yet to get past 12,900 with my gtx even at 4050 mhz. I did run 3dmark 06 a couple times at that but at 4072 or so I got a crash. Need to get it on water.
alright here is my 3dmark05 and 06 score, cpu speed 3970 24/7 setup. with single ultra 675/2300, and some games at 1920x1200x32 all with 4xaa and 16x af. everything maxed out.
3dmark 05
http://img485.imageshack.us/img485/48/3dmark05vu6.jpg
3dmark06, note this was the only test done at 702core and 2300 memory.
http://img485.imageshack.us/img485/682/3dmark06rr5.jpg
http://img454.imageshack.us/img454/9472/fearbo0.jpg
http://img300.imageshack.us/img300/2...hereos1gv0.jpg
world in conflict.
http://img184.imageshack.us/img184/9...onflictsm9.jpg
quake wars 53avg, taken with fraps.
3DMark2005
756/1150 MHz 8800 Ultra
4.260 MHz E6850
9*473 MHz
http://service.futuremark.com/compare?3dm05=3312649
3DMark2001
756/1150 MHz 8800 Ultra
4.260 MHz E6850
9*473 MHz
http://service.futuremark.com/compare?2k1=9237948
just bought one my self today..i havent done some serious testing (orthos etc etc) but is runs 100% some loops of 06 with the cpu tests,some 1024 primes,16M pi etc etc at 3750mhz @ 1.39Vcore loaded (1.4125V in bios - damper enabled).
L720A the batch..
I've ordered one today, can't wait... these things clock like crazy... is there anyone that has NOT been able to go over 3.7/3.8/3.9ghz on air? :slobber:
My stable overclock...L722A496 1.6 vcore
-asus 2900xt crossfire
This chip performs on par with my x6800 cpu lol $300 vs $1000 Im gonna cry
12hours Prime, 4ghz, 1.48vcore(bios) 1.46vcore(windows due to mobo voltage damper), Asus P5K Deluxe, 0501 Bios on WC
http://img266.imageshack.us/img266/9...e12hourts7.jpg
Passed 32mb, 3.6ghz, 1.26(bios) 1.24vcore(windows due to mobo voltage damper), Asus P5K Deluxe, 0501 Bios on WC
http://img230.imageshack.us/img230/4...24vcoreav0.jpg
what is your batch irangan?
Hi,how much V-core is the max recommended for 24/7? i get this with 1.5125 in Bios.
My 6850 step is:
Sla9u Malay
L719A 773
Is it good?
http://img524.imageshack.us/img524/2...1211wz3.th.jpg
bye
Here's my contribution to this thread. I received my E6850 last week, I just started OCing today (this is my first manual OC ever so don't laugh at it :P)
http://i3.photobucket.com/albums/y63...00ghz_load.jpg
I had to up the voltages in baby steps because it's my first time. I seems stable enough now seeing how I crashed and froze for about an hour before I got that far with orthos. It basically kept freezing after 5mins or so.
Edit 1:
3.8ghz
http://i3.photobucket.com/albums/y63...aded36mins.jpg
well after some testing i got this quick 32m.
Vcore at 1.53V..
http://img249.imageshack.us/img249/7259/32mjf3.jpg
last one for now:
http://i3.photobucket.com/albums/y63...aded40mins.jpg
This is my first overclock and I have to say I'm impressed :D
if anyone has any comments let me know... maybe I can do better.
All ambient temps between 27 to 29.5c (not in the case yet)
Stable:
http://i75.photobucket.com/albums/i3...6stability.jpg
I think it's going to me highest on air. Post bios Vdroop on speedfan. I've had it for a few hours longer than this:
http://i75.photobucket.com/albums/i304/scwam/3924.jpg
3dmark06 no problem 4x:
http://i75.photobucket.com/albums/i3...tability4x.jpg
awesome scores guys cant wait to try clocking my e6850 later on today ( its L719B027) :D
I cant remember clearly what is my batch code. Should be L720A***Quote:
Originally Posted by giorgos th.
Oh, you got the good one man! Mine is also L719B014Quote:
Originally Posted by Solarfall
i would lower your vdimm , 3.1v is well high for the mhz its doing,Quote:
Originally Posted by rsnt
also HT(SPP-MCP) volts could go down abit to around 1.5-1.6v.
awesome im currently testing it at 4.2ghz.. seems like a good one.. cant wait to get this thing under DI :DQuote:
Originally Posted by scwam
That sound nice! Currently got mine a 4ghz cooling was letting me down! Doing a new test 2day got new cooling last nite!
a bit better.with 1.55Vcore on load.
http://img.techpowerup.org/070807/32m362.jpg
I'm looking for overclocking suggestions specifically for the following hardware:
(FSB, voltage settings, ram settings)
CPU: Core 2 Duo E6850
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1301)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS
Thank you for any input
I got a L720A696 with Product Code: BX80557E6850SLA9U... tomorrow evening I'll be putting this chip to the test... I know of at least 1 L720A that primes @ 1.39v @ 4ghz... if this one can do that too... :slobber:
Can i enter the under 12" competition?
Got one yesterday, cooling is R404a.
A bit disapointing :(
L722A560
Almost 4.6, and that's dissappointing??? Lol.. If I could be so lucky.
What vcore/temps are you running?
the Spi score is dissapointing as mine is 12 sec @3919 :D
could be, only where did you post your score ?
I can always learn :)
Gamer wats ur vcore and what type of cooling are you running? and stable? temps.. dont post a SS without all the goodies ;)
sorry :)
Asus P5K bios 603
Vcore pencilmod 1.688v in bios
2048MB-Kit OCZ DDR2 PC2-8000 Titanium Alpha VX2
Modded prometeia with R404A
3Dmark stable at 4500mhz, taking first spot on 3D01 with single 7300GT, cooled with Chillyone unit, check my HWboints :)
Wprime 1024 stable at 4500mhz.
Not using this machine for anything else than benchmarking, rest is useless to me, sorry.
This is a 2t command rate @4.1ghz from about 2 weeks ago when I first got the cpu, once home later today I will post similar scores at 3.9ghz 1t cmd rate. with much less voltage.Quote:
Originally Posted by Gamer
http://i65.photobucket.com/albums/h2.../untitled3.jpg
lol.
Please take mod 1.5 XS to bench, it can even be 12.999 seconds in your screen :)
ok thanks will try that once home from work :DQuote:
Originally Posted by Gamer
Ok here it is at 3.97ghz. Gamer: You were correct about scores but I'm still in the 12sec under 4ghz :D
http://i65.photobucket.com/albums/h2...uperpi3979.jpg
I'm getting pretty much the same results as you are (3.8G with bios 1.35v). There was a mistake on my order and I'm forced to run a stock Intel cooler until the Vindicator arrives. Impressed with my E6850 (L723A047). Post some screenies here tomorrow.Quote:
Originally Posted by rsnt
myne is L723A943. i have just checked Pi32M 3,6GHz@1,4V. stable. :)
I currently have my system stable at 4.06Ghz
FSB unlinked
1.45 vCore
1800 FSB
Memory FSB 1250Mhz
Mem v 2.4
North Bridge 1.40
Ambient idle temp -33c
Still looking for better Results especially when I have 900+ for a cooler!!!
ANY SUGGESTIONS????
CPU: Core 2 Duo E6850 batch #L723A943
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1303)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS
we have the same CPU batch# :)Quote:
Originally Posted by adambomb13
Jugeen
I'm a newbie when it comes to OC'ing, would you happen to know or have suggestions for me to get my E6850 OC'd to 4.5Ghz or more?
Thanks anyone for any additional suggestions
i don't know striker extreme. i haven't seen its BIOS. sry! :(Quote:
Originally Posted by adambomb13
Quote:
Originally Posted by adambomb13
Raise Vcore to 1.55 and raise ur FSB to 500 :)
And I want a phase unit :( (will accept free donations ;))
Well so far it looks like air cooling or water is in my situation as good or better then my phase cooling, but thank you for the suggestions.
Please keep the suggestions/advice coming
Thanks
we mortals with air/water give 1.45Vcore...
you with the LS should definately give some more juice...
lol i give 1.55 on airQuote:
Originally Posted by giorgos th.
Well you mortals know more then I, because Im unable to unlease the POWER of phase cooling. And trust me my wife doesnt know how much it cost yet so Im safe for now..i think LOL
So your saying im Ok to go to say upto 1.6v on vCore???
at 4.06Ghz my cpu temp idle is -32c
Please keep the advice coming... And actually if anyone wants to call me and baby me through my under overclocking process, please send me a private message.,...
by saying "we mortals" i don`t mean that you are a baby,but that you are in a better position than us by having an LS..
try with 1.5 - 1.55Vcore to see how it`s going..
Cheers..
BTW here is a max freq. shot with 1.65.
Im not taking anything personal, I'm calling myself a baby/newbie to the overclocking world....I spent way too much money for my components to only get to 4.06Ghz i think... when I see other posts for 4.5Ghz to 5.3Ghz for an E6850 on water/air.. I just feel frustrated and looking for any help I can get to have my system run at its full potential.
So keep the suggestions/advice and even jokes/humor coming I seriously need it...
Thanks again
if you get more than one donation, you would drop me an e-mail :DQuote:
Originally Posted by michaLcoughliN
I would leave memory settings @ optimal for now and just raise vcore to 1.60 and your ldt a bit more and start upping the fsb to at least 4.5 in 100 mhz increments. reboot to windows and another 100 mhz to see how far can you take your cpu. Even if you have to use a divider with your memory to take it out of the equation. I'm not sure how much volts will your board allow you to use but with the LS, man, you should be in good shape.Quote:
Originally Posted by adambomb13
good luck hope that someone else with the asus board help out a bit.
p.s I've been able to boot and prime 1hr,super pi @ 4.2 ghz on air. but CPU gets way too hot (need your LS) :)
lol you really think I'd be able to boot with that high vdimm? :D if not blast my memory out of the board :p For some reason, many/most of the monitoring software around report weird temps and mainly voltages. and I think SPP-MCP was removed a few BIOS updates ago on my board.Quote:
Originally Posted by mercyless
I couldn't get mine 3.6 stable at that voltage :shakes: it took 1.45v to get it stable. I have the L719B095 and I wish I could've got my hands on a 20A - 23A but oh well...Quote:
Originally Posted by andyddr
you'd be suprised, 3 plus volts is do-able to boot, cause you said its your first go at overclocking, thought i'll mention it, my bad :)Quote:
Originally Posted by rsnt
I got the L718A190 batch and is not so bad thus far :DQuote:
Originally Posted by rsnt
please give link to 4.5 or 5.3 on water or air LOL. My 6850 needs 6+ volts to be stable at 4 gig so i dont think 5.3 is possible and 4.5 has no chance to be stable with regular water. Im using chilled water at 10c and my cooling system is barely holding good temps. Dont believe everything you read brother.Quote:
Originally Posted by adambomb13
Really? wait right... for some reason I totally forgot that most high end memory default around 2.3 or so. My bad then lolQuote:
Originally Posted by mercyless
I dunno but it seems that anything with A's in them overclock a bit better. I even remember seeing a 19A that overclocked pretty good.Quote:
Originally Posted by hlonipha
you asked for comments, i mentioned it, nothing more.Quote:
Originally Posted by rsnt
Latest update: Unable to keep 4.06Ghz stable :(
I have tried dropping the RAM out of the picture and un-linking the FSB. I cant even get 4.06Ghz stable anymore
I have tried:
FSB unlinking
Tried CPU FSB 18000
Tried MEM FSB 800
Tried vCore from 1.35 to 1.65v
Tried Mem v (Corsair tech suggested 2.4v) 2.4 to 2.425v
Tried Mem settings 5,5,5,18 Trcd 24
Tried Mem at 800 FSB and all mem settings at Auto
Tried HT 1.2 1.25v
Tried NB 1.40 to 1.55v
Tried SB 1.55
Tried Vtt 1.25
Tried disabled SLI Memory
Tried disabled all the spread spectrum settings
LDT Frequency I dont know what that is but I have the options 1-8x (5x default)
I think Im missing something. Do you think I should kill my RAID 5 and re-format so that I can use the SATA controller (stability)???
I'm at the point of returning my $900.00 Vapochill LS and accepting stock settings.
Thanks for all the help so far, please keep it coming
Well I've been playing around with my e6850, it's a L720A696 SLA9U stepping :)
4ghz rock stable @ 1.52 vcore :) <---- that's my 24/7 speed.
Unfortunately my GA-P35-DS3 undervolts, I've selected 1.6v in bios which gives 1.54 under normal circumstances :down: and 0.03v vdroop with both cores loaded results in 1.51v :down:
Im still on air. so old sk00l :p ahh its good enough for me. that extra 200mhz wont really improve much. the only thing i can see it doing is making it hotter in my room :o hehehe
Ive got mine to 4.1 stable 1.65v. around 58c in Load...
Max is more then 4.320Ghz, Vcore 1.78.
Im pretty satisfied until wolfdale :)
SLA9U , L722A186 REV G0
http://valid.x86-secret.com/show_oc.php?id=228419