Great runs NewBeetle!
9x6xx 1:1 is a great achievement! With better memories and motherboard sub-9m in 32M would be a history :D
Printable View
Great runs NewBeetle!
9x6xx 1:1 is a great achievement! With better memories and motherboard sub-9m in 32M would be a history :D
Better memory? What you want from memory which does 610+ 4-4-4-X with only 2.6v :P
32M is insane result, impressive 611X9 :cool:
Many thanks dinos22-san, 1Day-san, Trox-san, T_M-san, mup0-san, yotomeczek-san, ent-san, Miravo-san, Zannema-san :toast:
I will report on the image ,the spec, and the feature of my 4 Pots as early as possible.Quote:
Originally Posted by 1Day
Please wait for a while. ;)
The tape might not only be used to control the temp but also paper is used.Quote:
Originally Posted by T_M
I will report them.Quote:
Originally Posted by dinos22
Please wait for a while. ;)
Please send me PM.Quote:
Originally Posted by yotomeczek
I'll tell you the information about it.
Thank you so much, ent-san.Quote:
Originally Posted by ent
I will try sub-9m next run. ;)
I am shameful in my desire ..deep... :p:Quote:
Originally Posted by Miravo
I want to hold out more by this memory. :D
Hi, Zannema-san.Quote:
Originally Posted by Zannema
I'm very sorry for my slightly improvement to your record. :(
Let's hold out sub-9m aiming each other. :up:
DEWA DEWA ～
NewBeetle
hey just noticed that you have very interesting looking container NewBeetle-san. looks really nice imo.
very different from what i have seen . most of them are usually round.. does that kind of design give any advantage in term of cooling power..
or is it just for looks.
32m run is very impressive, but I think you can do sub 9 minutes. Good luck.
Hi NewBeetle-sanQuote:
Originally Posted by NewBeetle
I like this challenge :p: :up:
It'll be tough for me to catch you, my E6700 is hard to push over 5700 MHz to bench pi 1m.
New Beetle-san
very impressive :clap:
thx for sharing all that stuff and keep pushing :D
this is a very interesting design indeedQuote:
Originally Posted by NewBeetle
looking forward to hearing from you regarding this.....i'm in no rush :D
NewBeetle-san, that result is absolutely amazing. And to think, just yesterday I was telling Fredyama-san that I figured 9x would be next to useless for serious benching. :p: Amazing performance and 32M stability at such a high FSB. Just amazing.
very nice super pi benches newbeetle ;)
NewBeetle-san id just like to thank all the input and advice you and team japan have given to the overclocking community,
personally i know ive learnt a great deal not only about extreme PI benching, but optimizing performance at slower speeds and today again about pot dynamics,
congratulations on the amazing results ;)
im very interested on how you feel cooling the mch and sb affects your fsb and cpu overclocks? does the Vio mod give you extra stability at higher clocks?
Excellent result man :)
Congratz
Thank you always, Solarfall-san, Stapler-san, Zannema-san, PcCI2iminal-san, Gautam-san, blind_ripper-san, youngpro-san, LaMpiR-san :toast:
Not just for looks. :p:Quote:
Originally Posted by Solarfall
The purpose of this square shape is to expand the bottom product, and to improve the cooling capacity. :cool:
It seems "9x622" or "10x573" is necessary for sub-9m.Quote:
Originally Posted by Stapler
But never give up. :D
I was also the same yesterday. :(Quote:
Originally Posted by Zannema
However, when I set "CPU PLL Voltage" to "AUTO" today, my E6700#7 came to be very stable @5.7G or more. ;)
Please try it. :up:
I cannot show you the internal structure of the pot any more.....Quote:
Originally Posted by dinos22
because of the right of the design. :(
Please pardon this situation.
Even me, it was an unbelievable result. :p:Quote:
Originally Posted by Gautam
However, sub-9m will be achieved by 10x. :D
I feel the mch and sb cooling is very important.Quote:
Originally Posted by youngpro
However, so as not to cool them too much, I am cooling by water.
And I think that Vio mod is not very important for this P5K board.
DEWA DEWA ～
NewBeetle
Thank for the information, i try it:up:Quote:
Originally Posted by NewBeetle
I say as little later, but congrats your new 32M WR :up:
I think 9x ratio and high fsb (1:1) best way for your plan(sub 9min).
Good luck!
WOW.. :) really really nice run.. :)
looking forward for your sub 9m for a 32m run..
Good Luck!! ^_^
Thank you always, erwinz-san :toast:
This is today's my result..... :up:Quote:
Originally Posted by Zannema
9x ratio is "Geki-chin" today... :p:Quote:
Originally Posted by over@locker886
Next I try my plan by 10x ratio. :D
-----------------------------------------------------------------------
Today I exchanged mobo to P5K-E.
sub-9m was no good, but SPI 1M & hexus pifast are new WR... :up:
modPI 1M new WR : 8.797s @5768.2MHz (FSB576.8MHz x 10)
http://homepage2.nifty.com/NewBeetle/8797s.png
hexus pifast WR : 16.86s @5713.5MHz (FSB571.4MHz x 10)
http://homepage2.nifty.com/NewBeetle...fast_16s86.png
(Set up)
M/B：ASUS P5K-E Rev.1.00G vmod (76M0ACT67***/0401.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB watercooling：Alphacool NexXxoS NBX-A
SB watercooling：Alphacool NexXxoS NBX-N
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-161C
Memory：Team Xtreem PC2-6400 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.845V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.61V(Actual)
OS：Windows Server 2003
http://homepage2.nifty.com/NewBeetle/P5K-E_LN2.jpg
(BIOS Setting)
http://homepage2.nifty.com/NewBeetle/P5K-E_BIOS_1.jpg
http://homepage2.nifty.com/NewBeetle/P5K-E_BIOS_2.jpg
waaaaaaa....... Team Japan is on the roll.. :woot:
congratz NewBeetle san.. :rocker:
the details are very commendable.. hehehe hope next time a youtube video.. :)
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
holy crap is there something that team japan can't do....
excellent work as always :toast:
That's just insanity :toast:
How close are you to the 9min barrier?
This is nice... You are the type of a man, who when starts one thing, he will struggle and struggle to achieve absolute maximum :D
I am personally amazed, great score NewBeetle-san!
By the way
If your P5K-E have any cold-bug issues?
Omedetou! Sub 8.8
Fantastic!!!
Amazing!!!
Crazy!!!
A truely inspiring set of results NewBeetle-san :clap:
Impressive CPU, and S.O :eek: ;) :worship: :worship: :worship:, great work newbeetle
You and your E6700 are incredibles,no more words,only congratulations :shocked: :clap: ;)
It looks like breaking the SPI WR is a piece of cake for you :D
Amazing SPI times! Congrats again :D
diabolic e6700 ;)
congrats
Absolutely brilliant achievement mate! Determination pays :clap:
Very very good scores ;)
Nice to see some hardcore benches :yepp:
Dinos, refer below....Quote:
Originally Posted by dinos22
Quote:
Originally Posted by NewBeetle
Many thanks all !!! :toast: :toast: :toast:
Sorry, I have no video camera... :p:Quote:
Originally Posted by erwinz
I saw 9m02s today. ;)Quote:
Originally Posted by massman
More two click I will be able to break the baririer. :p:
My P5K-E has no cold-bug today.Quote:
Originally Posted by Miravo
It worked with stability even by -160C or less. :eek:
Crazy･･･Quote:
Originally Posted by G H Z
It is the highest praise word. :D
Next you will have good luck! :up:Quote:
Originally Posted by Zannema
Thank you always, C.h.r.i.s-san!Quote:
Originally Posted by C.h.r.i.s
This record is owing to 99.9% CPU power, only 0.1% me... :p:
DEWA DEWA ～
NewBeetle
Wow... Awesome work NewBeetle and Team Japan!
Pretty damn ridiculous, I want overclocking skills like yours.
Wonder if Team Japan will be the ones to break 8 seconds. :P
oh no :clap: :clap: magnificent cpu at the master's hand :up: :up: congrats :yepp:
Many thanks, ent-san, kqzOr-san, Timbosan-san, jmax_oc-san, T_M-san, ExodusC-san, jozzy-san :toast: :toast: :toast:
At last I got sub-9m & just-9m! :up:
modPI 32M WR : 08m59.875s @5713.8MHz (FSB571.4MHz x 10)
http://homepage2.nifty.com/NewBeetle/32M_08m59s875.png
modPI 32M : 09m00.000s @5706.6MHz (FSB570.7MHz x 10)
http://homepage2.nifty.com/NewBeetle/32M_09m00s000.png
(Set up)
M/B：ASUS P5K-E Rev.1.00G vmod (76M0ACT67***/0401.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB watercooling：Alphacool NexXxoS NBX-A
SB watercooling：Alphacool NexXxoS NBX-N
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-161C
Memory：Team Xtreem PC2-6400 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.845V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.61V(Actual)
OS：Windows Server 2003
Remarks：performance Level "7" by MemSet 3.3
http://homepage2.nifty.com/NewBeetle/P5K-E_LN2_2.jpg
(BIOS Setting is the same as the last run)
DEWA DEWA ～
NewBeetle
:fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :fact: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :party3: :party: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer: :cheer:
Congratulations on breaking 9 minutes!
More amazing results from Team Japan.
NewBeetle, may I ask why you use two different P5K's?
Congrats on the record! :up:
I knew it was coming Newbeetle, congrats.
Bravo :clap:
The bar has been set very high friends, who is up to the challenge? :D
:shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked:
how i missed that ..... :confused: :confused: :confused:
really impressive results and all the runs are just amazing congrats:worship: :worship: :worship: :worship:
lol we'll need some crazy DDR3 gear to beat this lol :DQuote:
Originally Posted by G H Z
The word which would describe this situation... doesn't exist :D
Magnificent!
P5K-E is better CPU OCer ;)Quote:
Originally Posted by filmbot
Impressive as always mate! :toast: :shocked:
Congratulation, you have break 9m in 32M, i try this wednesday.
Very impressive Newbeetle:clap:
we are not worth thee :worship: :worship: :worship: :worship: :worship:
you are the man NewBeetle :clap: :clap: :toast:
No, no, not "as always" - much better :D. You're still amazing us :).
Where is the limit, 6GHz or more? ;)
And what about that Level 7? Was there some higher V needed or so? On other Pi it should help also I suppose.
With vanilla it was no chance of doing that? Because when I asked about it - http://www.xtremesystems.org/forums/...&postcount=177 - the answers was not optimistic ;).
What now? Sub4 16M? ;)
Congratulations again! :clap:
:eek2:
:worship: Newbeetle and his magical A6700 :worship:
WOWOWEEE...
your the man.. :)
congratz.. ^_^
that is some CPU power.. :D
NewBeetle Congratulations!!! :clap: :clap: :clap: :clap: :clap:
Congratulations on breaking 9 minutes! :clap: :clap: :clap:
Amazing... :eek:
:eek2:
NewBeetle you have just dominated the whole SPi world! This sub-9m run will be remembered for a long time! Congratulations!
I think that with new board you can also improve other records! (like 16M for example :D), am I right? :D
Many thanks all and always!!! :toast: :toast: :toast:
I will not forget your congratulations through my life. :DQuote:
Originally Posted by dinos22
@x9 ratio, my P5K is a little stabler than my P5K-E.Quote:
Originally Posted by filmbot
But @x10, my P5K-E is a little stabler than my P5K. :p:
Good luck, Zannema-san! :up:Quote:
Originally Posted by Zannema
How to improve "performance level" is the setting of "CPU PLL Voltage" in my system (CPU#7 & P5K-E).Quote:
Originally Posted by JMKS
Only setting it to "AUTO", the level "7" can work. :eek:
It was a blind point for me.
And I think my vanilla can work Lebel "7" if it is the same setting as P5K-E.
DEWA DEWA ～
NewBeetle
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:Quote:
Originally Posted by NewBeetle
:shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked: :shocked::rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :rocker: :toast: :toast: :toast: :toast: :toast: :toast: :toast: :toast:
Awesome!:up:
:shocked: :shocked: :shocked:
another spi milestone broken ...
amazing clock and result NewBeetle :clap: :clap: :clap:
;)
Holy superpi LN2 ownage NEWBEETLE!!!!!!! :clap: :clap:
God himself??? :eek:Quote:
Originally Posted by G H Z
:worship:
whoah jst got wrong mb p35,but then again can,t give it constant supply of ln2 either.Very impressive gj thx
Wow!:eek:
Under 9 Minutes in 32M it's incredible!:clap:
Thank you all !!! :toast: :toast: :toast:
Thank you for your wonderful congratulations! :DQuote:
Originally Posted by Timbosan
Thank you so much for your congratulations, k|ngp|n-san.Quote:
Originally Posted by k|ngp|n
You celebrate and I am very happy now. :D
It is an awful word for me,Gautam-san. :p:Quote:
Originally Posted by Gautam
Again, thank you so much, massman-san, erwinz-san, Hyperr-san, ent-san, qballe-san, chester-san, nachthymnen-san !!! :toast: :toast: :toast:
DEWA DEWA ～
NewBeetle
Congrats :).
How about 630 x 9 for pi32m?
Very impressive Mitsuaki-san!!!
Great achievement! :D :toast:
That CPU is a real killer. When will you start benching 3D? :)
Very nice runs Newbeetle-san ;) I'd love to play with such a great CPU...
Congrats :toast:
It only took you 6 weeks, now didn't IT :)
After 1M, that was another wall that simply gave in to you, tired of all that restless smashing, NewBeetle :up:
Huge congrats :toast:
I was sure, you will be first person, who can run under 9 min. :up:
Great cpu, and greater master! Congratulations!:toast:
Now, you must go :party: :cool:
Team Japan is the true SPI king! :up: :yepp:
Many thanks all!!! :toast:
At present, it is difficult. :(Quote:
Originally Posted by M3kk
However, I do not think it is impossible. ;)
I did 3D bench only once with 7900GTO-SLI.Quote:
Originally Posted by Fr3ak
However, I did not continue because it cost too much. :(
I want to try again if there is a good sponsor. :p:
Thank you so much for your congratulations always, before-san :)Quote:
Originally Posted by before
I know you are one of the greatest pi bencher in the world.;)
I wish the goddess of OC to bring you a great CPU like your FX-57(San Diego) again. :up:
Thank you so much for your encouragement. ;)Quote:
Originally Posted by bachus_anonym
However, I want to take the rest only a little now. :p:
Thank you always, over-san.Quote:
Originally Posted by over@locker886
This result is a favor of this great cpu. :D
I make an effort to demonstrate the ability of this chip. ;)
Again at the end, thank you so much, M3kk-san, Fr3ak-san, before-san, bachus_anonym-san, over@locker886-san, and rick_fx-san :toast:
DEWA DEWA ～
NewBeetle
I'm sure you'll be the first to break the 8 sec barrier with the 45nm Wolfdales :D 6GHz for the 45nm anyone? :D
Thank you for your comment. :DQuote:
Originally Posted by Mad1723
I wish I can do it by ..middle range.. CPU. :p:
Quote:
Originally Posted by NewBeetle
Here is the image of my 4CPU-Pots + 1Chipset-Pot.Quote:
Originally Posted by dinos22
http://homepage2.nifty.com/NewBeetle/Pot_4+1.jpg
From the left side : Maxx NEO, Kuri-Pro 2, Kuri-Pro 4, V-TEC ARC Pot Rev.12.0XE
Center : Tara-chan 1st
1. Maxx NEO (90mm x 60mm x 120mm / 2050g) by TAM
For P4(Prescott,Cedar Mill)
Extra high-power CPU Pot, but it is difficult to treat and it awfully cools surrounding capacitors. :p:
2. Kuri-Pro 2 (60mm x 120mm / 1340g) by TAM
For Athlon XP(Barton), Athlon 64(Winchester,ClawHammer),Core2DUO(Merom), Pentium M(Dothan)
It's a basic model and the temperature management is easy. ;)
3.Kuri-Pro 4 (70mm x 150mm / 1650g) by TAM
For P4(Prescott,Cedar Mill), Core2DUO(Conroe)
It is easy to treat, gets cold well, and LN2 cost is good,too. :cool:
4.V-TEC ARC Pot Rev.12.0XE by Vigor
Only for Pentium M780 (I got pifast WR with this pot : 07-28-2005)
Special one of model made for me by Vigor. :up:
5.Tara-chan 1st (40mm x 60mm) by Kimuchi
For Chipset
It is the lethal weapon of chipset cooling. :D
DEWA DEWA ～
NewBeetle
:shocked: lots off copper over there .
btw newbeetle what dose dewa meen ? :D
the Tara-chan 1st.. looks really cute ;) thanks for posting the pic of your containers they are awesome :up:..
and like blind_ripper i would like yo know too what does dewa dewa mean..
Hi, blind_ripper-san, Solarfall-san :)
Quote:
Originally Posted by blind_ripper
It is a greeting of japanese overclockers.Quote:
Originally Posted by Solarfall
It means "Best regards" in English. :D
Impressive container round-up ...
Newbeetle, how much helps the watercooled Northbridge and southbridge to get te overclock stable? Is it just a matter of 1-2mhz higher than with aircooling or am I wrong here?
The advantage of watercooled might be about 2-5MHz. :p:Quote:
Originally Posted by massman
However, watercooled might be considerably advantageous if becoming long distance like 32M.
For me the maximum advantage of watercooled is not to cause the flow of air.
The flow of air should be a little because it makes frost and dew on the board. :(
Therefore, FAN is used to cool the memory by a minimum amount of the wind. :cool:
DEWA DEWA ～
NewBeetle
Thank you for the images and explanations of the POTS, your comments about airflow are very informative too. Again your generous spirit with information and help is greatly appreciated. May you go from strength to strength.
Thanks for the info :)Quote:
Originally Posted by NewBeetle
I always thought that using fans to minimalize the amount of condensation was the way to go. How do you insulate the socket area to prevent condensation?
omg >5700mhz 32m is out of this world :eek: congratulations from here as well for the sub 9min 32m. Looks like you have the best chip, equipment & skills around the world at the moment - simply godlike what you're doing these days :clap:
Thank you always, SoF-san :toast:
I use papers and masking-tape like this.Quote:
Originally Posted by massman
http://homepage2.nifty.com/NewBeetle...IMM_socket.jpg
And FAN Controller
http://homepage2.nifty.com/NewBeetle/FAN_Controller.jpg
DEWA DEWA, massman-san
NewBeetle
nice tips nb-san, :up:
btw.. u didnt use lacquer spray or nail vernish?
only masking tape?
I don't remember if I have congratulate you in this thread too :D so congrats one more time M8..... :D :clap:
Congratulation beetle san.It's wonderfull score.
That's quite a lot of copper Newbeetle, thanks for the explanations.
I like your pot newbeetle-san:up:
Thank you so much, the-strokes-san, hipro5-san, asterix34-san, Stapler-san, Zannema-san :toast:
No, I didn't use them.Quote:
Originally Posted by the-strokes
I use not only masking tape but also paper towel. :D
The paper towel is very important.
It has high adiabaticity and absorbs the drop of water. :cool:
I use it with matching the shape of the socket.
Thank you aways, hipro5-san :toast:Quote:
Originally Posted by hipro5
And congratulations on your 3DMark06 WR!!! :toast: :toast: :toast:
I am looking forward to your result on Wednesday. :up:Quote:
Originally Posted by Zannema
DEWA DEWA ～
NewBeetle
As other asked you about watercooling the NB and SB, how much more advantage do you get by using LN2 on it, or dry ice if thats what you use?Quote:
Originally Posted by NewBeetle
Congratulation NewBeettle-san :toast:
This is just amazing and its nice to see the WR returned to Japan where it deservingly belongs.... Wow.. :worship: :worship: :worship:
Maybe I helped a little in your great acomplishement :D ok maybe not lol.....Quote:
Originally Posted by luihed
Many thanks all!!! :toast:
Wow! Your new CPU is the fastest E6700!!! :eek:Quote:
Originally Posted by over@locker886
But it may not be E6700 because it shows x31 multiplier. :D
Watercooling on NB, I can run @FSB615NHz. :)Quote:
Originally Posted by filmbot
But using LN2 on it, NB is freezed. :(
Using dry ice and adjusting the temp (-)10C-(+)5C, I can run @FSB635MHz.
http://homepage2.nifty.com/NewBeetle...an_1st_800.jpg
http://homepage2.nifty.com/NewBeetle/6x635_P5K.png
Thank you so much, luihed-san. ;)Quote:
Originally Posted by luihed
I have not forgotten your word.
I was able to receive a very fast CPU from the overclocking gods as you said. :D
DEWA DEWA ～
NewBeetle
Thats a nice boost. I may have to look into making some sort of pot to try it out.
Thanks :)
Hi, filmbot-san and all :)
I tested Dry Ice-cooling for the chipset.
32M might run by FSB620 or more if holding out a little more. :D
modPI 8M new WR : 01m52.937s @5590.0MHz (FSB621.1MHz x 9)
http://homepage2.nifty.com/NewBeetle..._01m52s937.png
modPI 16M new WR : 04m10.437s @5559.5MHz (FSB617.7MHz x 9)
http://homepage2.nifty.com/NewBeetle..._04m10s437.png
(Set up)
M/B：ASUS P5K Rev.1.02G VMod (75MOACD45***/P5K0408.ROM)
M/B Bed：「V-TEC ARC Bed Rev.3.3」
NB cooling：Tara-chan 1st (mini copper pot) + Dry Ice/temp (-)10C-(+)5C
SB cooling：Swiftech MCX159-R + FAN + Torii-kun-mini (by Tam)
CPU：Intel Core2 E6700(L633A549#7)
CPU cooling：MaxxNEO + LN2/temp：-155C
Memory：Team Xtreem PC2-8500 C4 1GBx2 4-4-4-4
VGA：Matrox Millennium PCI 2MB
HDD：Western Digital WD360ADFD
Power Supply：OCZ PowerStream 520W
Vcore：1.830V(Actual)
Vio：3.50V(PC Probe 2)
Vdimm：2.65V(Actual)
OS：Windows Server 2003
Remarks：FSB550MHz x 9@boot
http://homepage2.nifty.com/NewBeetle...+Tara-chan.jpg
great great newbeetle :shocked: :up:
VMCH ?
Hi, my neighbor OC_Windforce-san :)
North Bridge Voltage (VMCH) is 1.55V.Quote:
Originally Posted by OC_Windforce
CPU PLL Voltage is 1.50V.
They are BIOS setting and no mod.
My chip seems not to be good at high voltage. :p:
DEWA DEWA ～
NewBeetle
^Apparently we have different definitions of good.
Quote:
Originally Posted by NewBeetle
Thanks. Kind NewBeetle-san :)
I feel like I am sitting in on a master class of Sub Zero overclocking and benching :up: :clap: , New Beetle-san you are a great teacher and your willingness to share your experiences and knowledge is greatly appreciated by me and I am sure by all members here. May Team Japan and all its members prosper and continue to have good luck. Thank you.:)
Congratulations,more two WR::clap: Fsb 620 Mhz.:shocked: great work,bravo Newbeetle san
OMG!!! Extremely nice, congrats:up:.
Youre welcome :).. I have an E6700 coming ( L626B ), maybe you can wish the same for me ;)Quote:
Originally Posted by NewBeetle
I tried using dry ice on the chipset and my commando's max fsb on 1066strap went from 490fsb to almost 520fsb... but my pot was just a nb cooler with a bunch of dry ice on top lol.....
http://www3.telus.net/luis99/oc/nbcooled.JPG
I notice that NewBeetle-san is only running the northbridge at -10C, so it doesn't seem like that'd take anything too elaborate.
Whatever works,right. :D
I love seeing xtreme northbridge cooling. The only time I tried it was on an i875 board...don't have any two containers that can fit properly atm on new boards. :-/
Congrats on new WRs NewBeetle! 9x617 runs are just awesome! :clap:
Why did you go back to P5K from P5K-E?