You will be pushed to see any e21** chips above 400FSB without exteme cooling.Quote:
Originally Posted by Tulatin
Printable View
You will be pushed to see any e21** chips above 400FSB without exteme cooling.Quote:
Originally Posted by Tulatin
Has anyone got M0 stepping yet ? Curious bout it's result ! :)
I got my Q705A E2140 to 3.2ghz with 1.43V (15 hour Orthos stable using a lapped TT120)
Attachment 62366
I got this on stock voltage (1.325V in BIOS) and stock cooling. +0.1V to the FSB and MCH. Gigabyte 965P-DS3 rev 3.3.
I plan to push further soon, but I don't know how much more since SpeedFan is reporting my T_case as 57-58c and Intel's thermal spec is 61.5c.
http://img519.imageshack.us/img519/3...40370x8ac1.png
EDIT: Damn, it's unstable:
http://img442.imageshack.us/img442/4...x8crashif1.png
Thnx !Quote:
Originally Posted by XS2K
If i got my WC set, i gonna clock the hell out of my E2160, i want to get the 3.6Ghz :D .
And my E2140 will face a 333 FSB mod, then i overclock that chip also again.
3.2Ghz on 1.2Vcore means that it burns Mhz on 1.6VCore :rofl: !
3.6Ghz is nice :DQuote:
Originally Posted by Prodigys
Go for it!
lo guys.. havent been here for a long time.. got myself a 2160, testing 3150Mhz now.. but the temp is quite high.. 81-83 with ORTHOS..
u think i can run it if its that high? my last Intel was P4 :shocked:
thx, someone
what should i measure with? core temp 0.95 shows 83°C, 0.94 691C, speedfan 69°C and intel thermal a. tool 81°C:shrug:
Well here is something close to 3.6Ghz (3555Mhz 9X multi) on stock cooling + a Air conditioner close to the rig,that's @ ~1.58-1.59V,sometimes it runs @ 3.57 with no problems other times (like this one) it wouldn't, anyway great chip for the money....
thanxs:up:Quote:
Originally Posted by Solarfall
Your temp is to high !Quote:
Originally Posted by $0m#0n#
Is your heatsink attached good ? And your cooler fits good ?
I dont believe those temps with any cooler :confused: .
Anyways, temps you can best read out with Everest and CoreTemp 0.95.
Quote:
Originally Posted by XS2K
I got the same with mine E2160, runs perfectly 3550Mhz , and sometimes harder, but usaully it snaps out if i go higher then 3560Mhz.
I wass testing on 1.52VCore then, but ATM waiting on WC rig and for now i use the boxed intel cooler :X
E2140 Q705A
http://img247.imageshack.us/img247/7...mefinaljg9.jpg
Shot at 2007-08-07
Here is mine
Attachment 62520
Wow that M0 -stepping can take some fsb! Not bat clocks either...
Now that i have better mobo (Gigabyte P35C -DS3R) i can get my E2160 to 3.2GHz (356 x 9). Vcore is set to 1.48V in bios. Zalman 7700AlCu is the cooler.
Lol, i get 415 x 8 on 1.25VCore :rofl:Quote:
Originally Posted by ValkyrieLenneth
my maximum:
stable clocks are 3100Mhz....
http://valid.x86-secret.com/show_oc.php?id=226222
http://www.abload.de/img/cpu-zkopie1zp1.jpg
so you guys think M0 of E2140/E2160 is best buy for price/performance....
You all guys have luck. I got really bad one E2160.
http://img508.imageshack.us/img508/1528/spidd6.th.jpg
Maybe my motherboard is fu**ed, its singing (PWM) when CPU got load.
Max stable FSB is 250, does not matter on voltage and multiplier. 2,25GHz its on 1,25V voltage.
http://valid.x86-secret.com/show_oc.php?id=222853
Screen Stable...box cooler 30C in my room!Soon when i get new cooler i will try more :)
GB P35-DS3P
Intel E2160
1GB PQI (soon 2gb kit Super Tallent CL4 Blue)
Albatron 8600GT 256DDR3
350W Fortron PNF
E2140 @ 388*8 = 3100Mhz @ 1,36V @ Noctua NH-U12F
DFI P965 Infinity-S Dark @ Stockcooler
2048MB DDR2-800 Crucial Value @ 388Mhz @ 3-3-3-9 @ 2,2V (Micron D9GKX)
Coba 650W IT-8650VG
http://www.abload.de/img/unbenannt31002kleincwi.jpg
click for big ;)
http://www.abload.de/thumb/unbenannt31002kopie554.jpg
OEM? RETAIL? So where do most of you buy your cheapo chips at? I just want nice steppings based on the store ya'll purchased from. I don't really care about the warranty, since I'm gonna void it anyways with overclocking. Thanks.
________
VAPORIZER SHOP
Mine is an retail, buyed at http://www.ble-computer.com/
Batch:
SLA3J malay
Q652A314
Had an E2140 for a week now and just started pushing it. Will have results soon.
Question for other E2140 owners: In Coretemp is your Tjunction read as 100deg C like mine as I have seen a few that read as 80. Does anyone know what this means? I'm not sure i trust coretemp as reading the true temperature.
For idle-temps use Coretemp 0.95, for temps under load use Coretemp 0.94. ;)
Here my maximum...
E2140 @ 392*8 = 3139Mhz @ 1,36V @ Noctua NH-U12F @ 52°C
DFI P965 Infinity-S Dark @ Stockcooler
2048MB DDR2-800 Crucial Value @ 392Mhz @ 3-3-3-9 @ 2,3V (Micron D9GKX)
Coba 650W IT-8650VG
http://www.abload.de/img/3130maxkleinlqx.jpg
http://www.abload.de/thumb/3130maxgrolgi.jpg
E2140 M0 @ 3200MHz 400x8
Boot into Windows @ default Vcore of 1.16250v lol... I'm so %#*$# shocked...
Gotta go to work now, stable testing tonight :D
Done it ;) .Quote:
Originally Posted by Devious
http://i15.tinypic.com/6arit90.png
This was with 1.7Vcore bios, and 1.66Vcore in windows ;) .
Temps, 29 idle, 63 stressed :up: .
EDIT:
414 x 9 also works ;). But validation was corrupt :( .
Nicely Done prodigy like always :D
Nice temps for 1.7v though, ur WC Set doess good as i see this :)
Nice cpu's to play with, i bet the 2180 wil scale good with cold and voltage :D
http://users.telenet.be/kuan/4.1.JPG
Just playing :D
http://i19.tinypic.com/4lhb30o.png
e2160 @ 3.7Ghz/1.5v
S3L Mobo
Stock cooler with added fan. Heat becomming big issue.
http://img187.imageshack.us/img187/3...160bzm4.th.jpg
Havent seen any fsb wall yet, even booting @ 430x9, only thing stopping cpu is heat atm. Better cooler in order.
C-BuZz
Hi...., i'm newbie, i try to oc my processor
e2160 @3,1Gh/1,5v
DFI i965 Dark Infinity
Kingstone DDR2 PC6400 Value
http://www.indoupload.com/reg/images...am26mnt OK.JPG
the highest ive had my E2140 is 2560 mhz at stock vcore, my DS3 rev 3.3 seems to be having some trouble with the bios, im back using the F10 bios just to get the OC to stick, not to mention i have severely poor cooling, even with the enzotech ultra x, the airflow is terrible in the case.
Fed ex is on the way with a new 2140 retail from newegg. gonna use a p5b dlx and a tuniq tower. goal is 3.2ghz. I'm not sure what the fsb max on 2140 is yet. I've mostly seen around 400mhz fsb. WIth the exception of Venom-Crusher's 440mhz fsb! :toast: amazing overclock!
Maybe I should've paid an extra $20 for the 9 multi? :shrug:
400FSB you may call yourself lucky ;).Quote:
Originally Posted by trans am
Most stop @380 or so ...
And X9 MP is lovely :D .
I know. Even 380 i will be happy. for the best o/c chips what stepping / batch # should I be looking for on the box?Quote:
Originally Posted by Prodigys
e2140 @ 3ghz (375x8)
batch L703C870
on a P35-S3L (yeah not the most feature rich board but this has been the dream budget board)
http://valid.x86-secret.com/show_oc.php?id=230899
e2160 @ 3510Mhz Stock cooling with larger fan
3D06
http://img201.imageshack.us/img201/5108/3d06tn0.th.jpg
e2160 @ 3690 Stock cooler with larger fan
3D06
http://img201.imageshack.us/img201/7391/3d062ze5.th.jpg
Can boot @ 440x9 / 1.6v but bsod before windows. Pretty unstable > 420fsb.
C-BuZz
perhaps with a better aircooling you can get a better clock. btw that score was nice with stock cooling..
Thx :)Quote:
Originally Posted by p47
Im sure with a better cooler the clocks should improve. But for now stuck on the stock HSF :(
C-BuZz
I see you've run 3DM which isn't bad for stability but have you tried Orthos? Curious to see how high it can do that for 8+ hours.Quote:
Originally Posted by C-BuZz
Cant run Orthos @ that speed. Temps get out of controll.Quote:
Originally Posted by MadMan007
C-BuZz
of course he cant run Orthos with stock hsf @ that clock. he must find another cooling maybe wc or an extreme coolingQuote:
Originally Posted by MadMan007
'of course' I didn't say at that speed either did I ;) in fact I didn't specify any certain speed. I was just curious what kind of longer-term stability he can get with whatever clocks/voltage for comparison purposes. I asked him specifically because he has an M0 and it seems to be doing very well and since there are so few M0 results around I figured I'd ask.
Any tips how to get over the wall? ll be happy 4 any advice.. i end up at 410.. ve got a 8cm fan over the NB
priming my 2160, air cooling
You can rise the FSB + SB voltage and try again.Quote:
Originally Posted by $0m#0n#
Very nice chip btw, i need 1.46VCore on 3.4Ghz :rofl: .
So hopefully the wall goes away with some tweaking and you can get maybe 4Ghz :clap: .
BTW, Coretemp 0.94 and Speedfan give you the TCAse temp, you need the CORE temps, and those will be +15°c of the temps what you see there !
So remind it , else you gonna bow up your chip !
u know with box temp were like 34 idle and 66C load.. in coretemp 0.94.. my ambient is like 20C.. with the thermalright ultra 120 i ve got 21 idle (i 'd say it right as i ve got a 12cm 2000rpm fan) and i ve got no case.. so the mobo is on the table.. and there is nothing like (its "hot" in case so u cant have 21 idle)..Quote:
Originally Posted by Prodigys
so i ***** dont know what to trust
Quote:
Originally Posted by $0m#0n#
The only program that is right is CoreTemp 0.95.
Maybe also TAT, BUT, that is a program that was originally created by Intel for mobile cpu's, so with that you also can get e wrong indication ;).
EDIT:
you need to change your ava :welcome:
I don't think coretemp 0.95 is right at all. It says i have a load temperature of 75deg C. I know i have good contact from heatsink and there is no way it is that hot. You can tell that much just by touching the heatsink.
I have the E2140 @ 370 X 8 (2956Mhz). 1.3v. Seem to have hit a wall about here and cpu needs way more voltage to go a little higher. this will have to wait until i find a LGA775 bracket adapter for my xp120.
The you just stay stuck on CoreTemp 0.94 !Quote:
Originally Posted by tom_ed
I tested it with varies of persons.
I got with Coretemp 0.94 temps of 21/22°C when my room is 25°c, you think that is right ?
NO ;).
So if you wanna be harsh and dont want to listen stay on 0.94, but dont complain if your cpu is dead ;) .
Unless you can prove to me, that YOU can cool something to 21°C with air that's 25°C ;) .
Then you are THE MAN !
Sorry for my post, but you dont understand it, then i must be a little hard :up: .
To be honest i dont think coretemp 0.94 is right either, it gives closer to realistic values on my system though.
I'd take a seaparate correctly positioned thermistor over these internal diode reading apps anyday.
I'm gonna test a 2140 with an Ultra-120 extreme soon.
________
SILVER SURFER REVIEWS
You should run 094 and 095 at the same time. See if they are different since you seem 100% sure they are. Maybe other people have the opposite results from which one is correct. :shrug: Last time I did this they were exactly the same, of course the 'reality check' always applies - idle temps can't be below ambient with air or standard water for example.Quote:
Originally Posted by Prodigys
*edit* Didn't mean the above to sound harsh. I've just tried out Coretemp 094 and 095 with my L2 stepping (:() e4400. Running them at the same time 095 does read 15C higher but also shows TJunction at 15C higher. Don't know which to believe but as long as the temp to tjunction allowance is correct it doesn't matter. The CPU is a poor oc'er anyway :p so I don't really care.
I see that this is M0 stepping...can u tell us the BATCH no as well. A pic of the box sticker will be excellent :DQuote:
Originally Posted by C-BuZz
Quote:
Originally Posted by tom_ed
Coretemp 0.94 gives me 6°C idle :rofl: .Quote:
Originally Posted by MadMan007
Coretemp 0.95 gives me 23°c idle...
My room i currently @21°C, and my water of my WC rig is 22°C.
What do you think is right ?
I just say it to help you guys, you will be looking @ 0.94 and 0.95, YOU all think, ohh I LIKE 0.94, because of the temps ;).
Well , let me say, if you are on 65°c with 0.94 it's actually 80°C ;).
I understand you all why you wanna believe 0.94, but it is wrong.
Look, your are 'hopefully' grown up guys, so pls listen if i say it. I know al lot off guys that where wrong about 0.94 VS 0.95.
Why yoy think its called 0.95 anyway ? Becuase its a new update, and updates give sollutions to earlier bugs...
Just want to say, i've been ALWAYS under ambient temp with 0.94, and i'm not a holy man to break the law of physics :p: .
I hope you understand it now ;) .
Besides that guys, i gonna leave you all, i'm on a E6750 now.
My E2140 is sold, and my E2160 is getting some dust in the closet :P.
But i will keep in touch here :up: .
http://www.ocpulse.com/download/E2140.jpg
Im only using the retail heatsink right now, soon as i upgrade ill push it higher.
didnt have more time to run orthos.. :shakes:
there r 2 orthos & speedfans.. cose i ve posted it twice to "paint"
Screaming results for a dirt cheap chip. I just stumbled across this since I sold my Biostar Tforce P965 and E6300 that was good for 3.4. I was able to buy a sealed EVGA 680i SLI A1 board and for now I got a retail 2140 till Q6600 drops a bit more
My batch code is Q724A014 I am jus wondering what success is with this batch should anyone else have. Pack date is 7/12/07 and its a SLAYJ3
Just waiting on a few other pieces then build the box and see what this chip can do, I will be more than happy with a 100% overclock
here's my E2140 with Abit IP35 PRO under DI
RAM @ single channel and it's A-DATA EE 1200+ D9 GKX
Superpi 8M
http://img407.imageshack.us/img407/5071/e2140475oi4.jpg
Superpi 2M
http://img508.imageshack.us/img508/6175/2me2140hy0.jpg
Superpi 1M
http://img461.imageshack.us/img461/6672/1me2140vb7.jpg
^^ nice clocks, whats your voltage?
A bit more Stock Heatsink action. Ambients around 13c. Getting a little toasty so didnt let her run to long.
http://i224.photobucket.com/albums/d.../prime3510.jpg
Batch: Q713A170
Delta is massive from idle/load. She idle's around 20c, then jumps straight to 65c under load & slowly increases. Better cooler should reduce the massive delta on air.
http://i224.photobucket.com/albums/d...z/idle3645.jpg
C-BuZz
1.6v :D :DQuote:
Originally Posted by aiya
lol wow. on water i'm guessing? and if on air, DAMN :shocked: hope thats not 24/7.Quote:
Originally Posted by wedfighter
That's an M0 chip. So far, M0 chip seems to be better o/cer than L2. Any oc result from you?Quote:
Originally Posted by Cisco Kid
Hi this is my E2160
http://img376.imageshack.us/img376/3227/dsc00284nj8.jpg
http://img174.imageshack.us/img174/3130/dsc00291ny1.jpg
http://img375.imageshack.us/img375/2534/dsc00289nj6.jpg
http://img529.imageshack.us/img529/5029/15656cx0.jpg
http://img266.imageshack.us/img266/3599/m3215dm5.jpg
http://img529.imageshack.us/img529/3978/4ghzon8.jpg
http://valid.x86-secret.com/show_oc.php?id=224070
http://img354.imageshack.us/img354/5228/wr4ghzap8.jpg
call me a n00b or whatever but how come some of you with 2140's have 8x multi and some 9x?
I don't see a 2140 with a 9 multi, only 2160s...please reference a post # for a 2140 with a 9 multi.
Nice clocks there Ming@s, with a L2 as well.
What impact does the lack of cache have in non-benchmarking activities? would you know what speeds these chips need to reach in order to compete with the 4mb cache chips?
update some result, still with L2 rev :D
i've got an M0 my self but havent play with it lately...
E2140 with LN2 cooling
FSB 496 Superpi 1M
http://img74.imageshack.us/img74/5373/4961mqs6.jpg
some pics :
pouring some LN2 to container :
http://img205.imageshack.us/img205/6292/dsc3191ws5.jpg
http://img365.imageshack.us/img365/7365/dsc3233ae4.jpg
http://img205.imageshack.us/img205/7921/dsc3238mo2.jpg
terrible insulation :D
http://img205.imageshack.us/img205/3852/dsc3242zr4.jpg
Amazing job! :toast2: :toast2: :toast2: :toast2: :toast2:
@ trans am
thx bro :toast: :toast:
How to choose the best E2140? which series is the best? Does batch have any influence on overclocking??
my e2140
http://i32.photobucket.com/albums/d2...s/1201mspi.jpg
Specs:
Setup:
e2140 aircooled by scythe zamurai-z with 92mm dc koala.
ip35-e
2 x 512 ddr2 Micron D9
80g WD
550 HEC
on one of ewiz's weekend sales i picked up an e2140 for 66.67$ shipped, does 3200Mhz 1.45 v's 24/7 stable :) 100% OC ftw!
wtf? :toast: :toast2:Quote:
Originally Posted by NormanABates
what is the vcore? thats a damn good oc!! what the pack date and code on that 2140?
What Vcore? Is that a M0 or L2? It doesn't say it with that version of CPU-Z, try a newer one.Quote:
Originally Posted by NormanABates
wedfighter: Very nice E2140 you got there :)
What was the max speed (FSB) you were able to run on air?
My E2140 can do 456MHz FSB with 1.4V, but not a single MHz higher on air or watercooling. I will try it on LN2 soon, but it would be interesting to know how much further you were able to push it with better cooling.
Here is the CPU-Z validation:
http://valid.x86-secret.com/show_oc.php?id=230040
i have a e2140 i got from directron.com a few weeks back.
batch#: Q711A630
Package date: 07/30/07
SLA3J stepping so its L2
i should have time this weekend to put it together, just waiting on my Ultima-90 to come :p:
Hey, thanks man.Quote:
Originally Posted by trans am
vcore is around 1.35 or a tad higher. Cant remember the fpo/batch coz i got it without any box or any protective stuff. Ill try to run it again maybe on a different mobo or same mobo coz that mobo is not mine, its for my buddy and i just test the mobo before giving it to him.
yeah, i was just amazed too it went that far considering my hsf,scythe zamurai-z is smaller i think than a stock intel hsf .
Will also try to run this on a much bigger hsf and post the result here.
1.35 or a tad higher, just cant remember coz i did run only once. Will post again when i have my mobo.Quote:
Originally Posted by Noob-ftw
What were your temps like? What program were you using to measure temps, id love to push this E2140 i have that high :)Quote:
Originally Posted by NormanABates
http://i32.photobucket.com/albums/d2...k2005score.jpgQuote:
Originally Posted by Spawne32
when i run this, coretemp says its 62 on both cores.
thx u Fr3akQuote:
Originally Posted by Fr3ak
i could do about 450ish on air, and 440 on stock cooling
looks like u hit a wall on that FSB, try a subzero perhaps it can break the wall :up:
a nice CPU u've got there too, is it M0 or L2 revision? i have an M0 that can do bout 440 on 1.4v but it can't scale much more higher no matter what voltage we gave
i'll try to push some more this weekend :D
@wedfighter,
awesome chip you got there.
whats the fpo/batch?
ill post mine tomorrow.
wedfighter, I have a L2. I will lap the IHS and put the chip on LN2 in about 2 weeks, so I will find out how much further it can go. Too bad the budget chips have a hard fsb wall. Voltage wise, there is a lot of heatroom left :/
But even a 100% OC on a 70USD chip is awesome. Not comparable to what chips overclocked 3 years ago.
my validation.
http://valid.x86-secret.com/show_oc.php?id=241522
@Noob-ftw, trans am
its an M0. Batch Q725A.
Hi all!
with short time of tweaking I got my E2160 (rev L2) to 333mhz*9, meaning 2997mhz. To achieve this, I had to rise the cpu voltage to 1.4V my cpu cooler is TT bigtyp vx, which is quiet and it has a lot of cooling power(and I got it cheap ;) ) have done some tweaking in bios, like disabled the thermal control etc, but, this one is not maxed out yet.the stability? I ran 3dmark06 about ½ hour, tweaking my 8800gts, and the system run fine. I´ll run orthos when I have time.
http://koti.mbnet.fi/narkian/pictures/benchmarks%20&%20overclocking/3dmark06_10130.jpg
hey bro i was looking your temps at 100% load and you have a lot head room left in that department, just raise the vcore and see how far you can push the cpu. :up:Quote:
Originally Posted by Ajn
1.4v is nothing if you cooler can handle the temps.. with knowledge of 6 intel core 2 duo chips i can say that the system will come unstable somewhere around 60-70c so keep pushing mate i wanna see more mhz :D :up:
heh thats what I thought too. Mayby I should run all fans in case at full speed, and rise that vcore. And now, when the air has cooled down a lot, mayby I´ll take the mobo of the case and try overclocking with zero-temp air :D we`ll see..Quote:
Originally Posted by Solarfall
Well 3.2GHz isn't much but it's a start :)
http://img249.imageshack.us/img249/5507/cpuzk9.th.jpg
I think that it went pretty easy to that speed as I didn't have to tweak very much. That vdrop is pretty huge or I think it is as voltage is 1.36v when idling and 1.32v under stress.
Im using TuniqTower btw. I might lap the CPU one day as it seems to be concave if you look at the temps...
Also make sure Orthor run for at least 8h to be sure your system is stable ;)Quote:
Originally Posted by Californian
yup actually it's a $65 chip :D and yes it's OC quite wellQuote:
Originally Posted by Fr3ak
i haven't lap the IHS and it runs on stock cooling on daily use @ 450 @ 1.45v
under LN on previous page i set the vcore to 1.7v (BIOS) bout 1.65v (real) damn this IP35 PRO has a lot vdroop
i'm gonna try another board soon, maybe with DFI LP P35 next time :D :D
thx NormanQuote:
Originally Posted by NormanABates
it's a L711A648
Yeah I had it on about 3hrs but for the screenie I just run for a few minutes to show temps and vdroop.Quote:
Originally Posted by r4st4m4n
That 3hrs is more than enought because all the games work perfectly even when I play merely whole day :p:
my batch is Q711A717 is that a good one? sla3j i get my mobo today. its a asrock dual-sata2 it wont clock over 300mhz. but its a step up from my barton 2500 so im happy.
Try the BSEL mod from 200->266 default FSB.Quote:
Originally Posted by acme420
last night after we have 1st day of shaum (puasa) me and hazzan play some LN2 action again!
and the result is ........ :toast:
http://img483.imageshack.us/img483/9481/wre2140kr2.jpg
http://www.ripping.org/database.php?cpuid=583
validation : http://valid.x86-secret.com/show_oc.php?id=242133
Ingredients :
ABIT IP 35 PRO OFF LIMIT thx to Spectrum Utama
ADATA Extreme 1200+ 1GB thx to Dinamika Perkasa Jaya
FSP Epsilon 600w thx to Gamer's Garage
some pics :
http://img72.imageshack.us/img72/9277/img3445fa9.jpg
hazzan (left) me on right
http://img62.imageshack.us/img62/9774/img3457nc3.jpg
http://img212.imageshack.us/img212/1939/img3456sl1.jpg
http://img212.imageshack.us/img212/2049/img3434ld6.jpg
http://img483.imageshack.us/img483/929/img3457kd5.jpg
Nice o/cing wedfighter :worship:
I got an E2140 L2....i hit 3GHz at 1.35V(sensor read). But it wont pass 405FSB no matter how...lol. I haven't try on lower FSB (just to check if it's mobo?) and higher MCH voltage (tried 1.75V). BTW, I had to change the FSB strap to 1066Mhz. Not sure if 1333Mhz is working or not....could this help?:confused:
Here is some short test:
http://img146.imageshack.us/img146/1839/abcfl1.th.jpg
bro wed.. i cant see corsair hx 620w.. at the table.. i thought you are using FSP PSU.. am i right??
nice chip you got overthere...
thx bro kojiro :)Quote:
Originally Posted by kojiro91
nice to see u here :D :D
yes you right..i'm using FSP 600w for benching..
Corsair for my 2nd rig
both are great PSUs :up:
http://valid.x86-secret.com/show_oc.php?id=242569
first try
crucial pc3200
e2140
asrock 4coredual sata2.
2.09ghz mem 4:3