New E6600 batches, post your Overclock

Printable View

Show 100 post(s) from this thread on one page

04-25-2007, 07:44 PM
chaos_being

Cool, an Ultra-120 Extreme is one of the parts I'm waiting on too :D

Good call on the OC database too. I see that there aren't man entries for the newer weeks at all...I'll be sure to add to it soon.
04-25-2007, 07:46 PM
Andrew LB

Ok.... my first overclock attempt has me at 3.2ghz. Idle was 37'c with the stock cooler at 1.35v. I've been running Orthos for the past 20 minutes and my temps are stuck at 58'c both cores.

I think it's time to ramp it up a little more.
04-25-2007, 07:47 PM
sreedx2

Just received a L709A442 pack date 04/12/07 currently testing 3.2ghz at 1.30v loaded 48 min

EDIT: Yeah I will have to add mine to the database soon
04-25-2007, 07:56 PM
bgrenco

ZZF E6600@ 3.2 on 1.32 vlts

Quote:

Originally Posted by chaos_being

Cool, an Ultra-120 Extreme is one of the parts I'm waiting on too :D

Good call on the OC database too. I see that there aren't man entries for the newer weeks at all...I'll be sure to add to it soon.

FYI...Arrived today from ZZF. My first Intel build in years.
Have it running 3.2ghz on 1.328 v. on a 965p ds3 version 3.3. Have not tried for a higher oc. New to this intel. Failed orthos at stock voltage so up to 1.328 and so far good.

Batch L0704A945 pack date 04/04/07..
04-25-2007, 07:56 PM
Andrew LB

One quick question guys.... at what temperature should i start getting concerned about the safety of this chip? I'm going to push this thing on the stock cooler some more but want to make sure i don't go too high on temp or the voltage.

thanks!
04-25-2007, 08:25 PM
doger_666

Quote:

Originally Posted by sreedx2

Just received a L709A442 pack date 04/12/07 currently testing 3.2ghz at 1.30v loaded 48 min

EDIT: Yeah I will have to add mine to the database soon

i have the exact same pack date and stepping so that makes me really happy, are you using air, or water or some other kinda cooling, if your using the same set up as on your sig im going to be buying almost the same water cooling set up as that from NCIX in about a month or so

some one from extreme overclocking forums said that sl9zl cpus where not OCing good,

and sreedx2 do you DH or freeride mountain bike or some thing, im huge in to mountain biking as well
04-25-2007, 09:28 PM
sreedx2

Quote:

Originally Posted by doger_666

i have the exact same pack date and stepping so that makes me really happy, are you using air, or water or some other kinda cooling, if your using the same set up as on your sig im going to be buying almost the same water cooling set up as that from NCIX in about a month or so

some one from extreme overclocking forums said that sl9zl cpus where not OCing good,

and sreedx2 do you DH or freeride mountain bike or some thing, im huge in to mountain biking as well

ah the good old days .. yes I am into mountain biking .. I use to do a lot of downhill and jumping I still jump but I take it easy .. I'll ride up then down :) how about yourself what kind of riding do you do

Yes I am running whats in my sig, NCIX = GOOD :D

I actually just received my cpu today and am OCing at the moment, currently testing 400x9 3.6ghz at 1.48 loaded :( I am hoping it just has a break in period because 1 step lower Vcore in the bios I got a bluescreen after 40 min

I don't know what the deal is but the two newer batch cpu's I have had both like to bluescreen instead of failing orthos

doger_666 ... I am very happy so far with my cooling, good luck with yours :)
04-25-2007, 09:32 PM
sreedx2

Quote:

Originally Posted by Andrew LB

One quick question guys.... at what temperature should i start getting concerned about the safety of this chip? I'm going to push this thing on the stock cooler some more but want to make sure i don't go too high on temp or the voltage.

thanks!

Max is 60C personally I try and stay under 55C or 50C whatever makes you feel better :)

Quote:

Originally Posted by bgrenco

FYI...Arrived today from ZZF. My first Intel build in years.
Have it running 3.2ghz on 1.328 v. on a 965p ds3 version 3.3. Have not tried for a higher oc. New to this intel. Failed orthos at stock voltage so up to 1.328 and so far good.

Batch L0704A945 pack date 04/04/07..

yours is close to mine .. curious to see how it does, find your max OC :D
04-25-2007, 09:54 PM
Joshwaan

Hi Guys

I'm thinking of upgrading my E6300 which is at 3.00GHZ atm to ethier a
Core 2 Duo E6600 or a Core 2 Duo E6700.

I basicly want to get 3.6 GHZ out of the chip of air.

I have a good case and lots of fans use AS5 paste and good CPU cooler.

I was wondering would a E6700 do 4GHZ? I use MAME emulator a lot a need the speed.

Also what board would you suggest to get this kind of clock and what memory?

My Specs:

E6300 running at 7x430
Gigabyte 965-S3
2x1GB Patriot 5300 memory running 1:1, my memory can hit 930MHZ after that it hits a wall.
Radeon x1900XT
Artic Cooler pro 7
Full midtower with 2 120mm fans.

Thanks

Josh
04-25-2007, 10:23 PM
Andrew LB

Quote:

Originally Posted by sreedx2

Max is 60C personally I try and stay under 55C or 50C whatever makes you feel better :)

Cool. thanks for the tip. I'll keep it at 3.2ghz until my Thermalright Ultra-120 eXtreme arrives later this week. I'm putting a 120mm Panaflo M1A BX fan on it to keep this thing cooled down. I'm sure it will do wonders compared to the stock Intel POS.
04-26-2007, 12:47 AM
|2ed |ey

Quote:

Originally Posted by sreedx2

ah the good old days .. yes I am into mountain biking .. I use to do a lot of downhill and jumping I still jump but I take it easy .. I'll ride up then down :) how about yourself what kind of riding do you do

Yes I am running whats in my sig, NCIX = GOOD :D

I actually just received my cpu today and am OCing at the moment, currently testing 400x9 3.6ghz at 1.48 loaded :( I am hoping it just has a break in period because 1 step lower Vcore in the bios I got a bluescreen after 40 min

I don't know what the deal is but the two newer batch cpu's I have had both like to bluescreen instead of failing orthos

doger_666 ... I am very happy so far with my cooling, good luck with yours :)

What is your other batch no? :)
04-26-2007, 05:26 AM
bgrenco

L704A945 @ 3.2ghz on 1.328 v temp idle 29c load 46c

Quote:

Originally Posted by sreedx2

Max is 60C personally I try and stay under 55C or 50C whatever makes you feel better :)

yours is close to mine .. curious to see how it does, find your max OC :D

This is my first c2d build and I am still learning about how to oc this chip and Gigabyte ds3. Sorting thur lots of reading on the forums!! May try tonight to get ot higher . Being on the conservative side for now.
04-26-2007, 06:11 AM
sreedx2

Quote:

Originally Posted by |2ed |ey

What is your other batch no? :)

well the one I was just running was L629B367 which I was running at 3.3ghz with 1.43 Vcore any higher the voltage would be through the roof

also had a L638F050 and it was crap .. don't even remember what I had

My L709A442 is running at 3.6 with 1.48v loaded small fft's 8 hours

currently running blend to see if she is stable .. just knocked the voltage down one step and she crashed after 3 min

Quote:

Originally Posted by Joshwaan

Hi Guys

I'm thinking of upgrading my E6300 which is at 3.00GHZ atm to ethier a
Core 2 Duo E6600 or a Core 2 Duo E6700.

I basicly want to get 3.6 GHZ out of the chip of air.

I have a good case and lots of fans use AS5 paste and good CPU cooler.

I was wondering would a E6700 do 4GHZ? I use MAME emulator a lot a need the speed.

Also what board would you suggest to get this kind of clock and what memory?

My Specs:

E6300 running at 7x430
Gigabyte 965-S3
2x1GB Patriot 5300 memory running 1:1, my memory can hit 930MHZ after that it hits a wall.
Radeon x1900XT
Artic Cooler pro 7
Full midtower with 2 120mm fans.

Thanks

Josh

Get a commando P965 Board or how are the new DFI P965 boards doing

Depends really if you get a good chip or not .. also depends how much voltage you want to give your cpu, with the newer batches lately some have been OCing well some haven't, how is your luck ? :)

I can sell you a brand new E6600 not opened, I ordered two thinking I would get different batches but turns out they shipped me two of the exact same chip
I have posted my OC's so far above

If you want to run 3.6 400x9 with a 1:1 ratio your ram is fine but if you want to run 4:5 probably a no go considering you mentioned above you cannot reach 1000mhz .. so if you reached 3.6 and wanted to push it further you probably do not have much headroom .. If looking to upgrade your ram find some nice D9 chips from G skill, Team group .. the list go's on

EDIT: ah whoops did not see what ram you had .. yeah maybe upgrade to some DDR800 D9 chips .. my Team Group can do 1000mhz easy with stock volts or less

Quote:

Originally Posted by bgrenco

This is my first c2d build and I am still learning about how to oc this chip and Gigabyte ds3. Sorting thur lots of reading on the forums!! May try tonight to get ot higher . Being on the conservative side for now.

Well there is a lot of good help here on the forum, keep on truckin :D
04-26-2007, 07:41 AM
rfisher983

More Results:

e6600 L649G
DFI p965-s
410x9 = 3690 @ 1.5V (+225mV) NB @ 1.3
2gig G.Skill hZ 533 DDR @ 821 4-4-4-12 (trying to find max cpu)

Thermalright eXtreme 35c idle - 65c load

3dmark05: 18926
3dmark06: 10854

8800GTS 320mb @ core 594 / shader 1404 / memory 1790
Still testing, came from athlon 3700+ oced to 2.75 and this e6600 is ALOT faster
04-26-2007, 08:10 AM
nealh

Quote:

Originally Posted by sreedx2

Max is 60C personally I try and stay under 55C or 50C whatever makes you feel better :)

yours is close to mine .. curious to see how it does, find your max OC :D

60C max??? maybe for good watercooling but on air cooling few will get that with load temps and any core on most of the C2Ds
04-26-2007, 09:16 AM
Mad Pistol

Right now, Here's what I'm testing. It's not very extreme, but I'm surprised that the current voltage it's set at is working.

E6600 @ 3202Mhz
Vcore: 1.325v
Memory: 854mhz

I'm not sure where to fiind my processor batch number though. Do I have to actually look on the physical chip? Sorry, I'm a noob to the overclocking scene.
04-26-2007, 10:56 AM
Andrew LB

It will be printed on the heat spreader on the top of the chip as well as the bottom of the retail box if you went that route.
04-26-2007, 11:35 AM
chaos_being

Quote:

Ok.... my first overclock attempt has me at 3.2ghz. Idle was 37'c with the stock cooler at 1.35v. I've been running Orthos for the past 20 minutes and my temps are stuck at 58'c both cores.

I think it's time to ramp it up a little more.

Hmm, that actually doesn't seem that bad to me so far, maybe the 44's can do well too? With a better cooler and some volts, hopefully the results should be interesting :)
04-26-2007, 01:07 PM
aclim

Hey,

Just got my 6600 in the mail from ZZF yesterday, upgrading from a 6300

It has a packing date of 3/26/07 and its a L644G425 . Ill let you guys know how this does, im waiting for a U-120 Extreme, didnt think my freezer7pro would be sufficient. Hopefully this weekend ill have it up and running.
04-26-2007, 01:11 PM
chaos_being

Interesting...I got the same batch and I ordered from ZZF as well. Same packing date as well I believe (the chip is not in front of me.) I'll be awaiting your results, I'm not entirely sure when I'm getting a few of my parts (usps tracking sucks.)
04-26-2007, 03:26 PM
aclim

Quote:

Originally Posted by chaos_being

Interesting...I got the same batch and I ordered from ZZF as well. Same packing date as well I believe (the chip is not in front of me.) I'll be awaiting your results, I'm not entirely sure when I'm getting a few of my parts (usps tracking sucks.)

cool, im gonna be looking for around 3.3-3.4 oc, im gonna be dropping down the multi to x8 probably too, just to squeeze out my ram that I know OCs well.
04-26-2007, 04:13 PM
Bei Fei

First tests on my e6600 I got from mew egg yesterday.

L706A499

I am testing on air with a through hole mounted Ninja.

3429 auto voltage with 56C load temp.

Odd thing is CPUZ shows my Multi @ 6.
04-26-2007, 04:48 PM
Andrew LB

Quote:

Originally Posted by chaos_being

Hmm, that actually doesn't seem that bad to me so far, maybe the 44's can do well too? With a better cooler and some volts, hopefully the results should be interesting :)

I've yet to even get started overclocking this thing. As soon as I get a better cooler (probably Enzotech Ultra-X 120 since the Thermalright Ultra-120 Extreme is too tall for my case) i'll ramp up and see how high this thing will go. I'd rather not go much higher since my stock cooler sucks.
04-26-2007, 05:21 PM
dinos22

i tested a new CPU recently

Intel Core 2 Duo E6600 (batch#L707A255)
Watercooled (Switech dual rad/MCP350/apogee)

3.6GHz ~20m small FFTs Orthos 1.45v Loaded
http://img406.imageshack.us/img406/6...fft20mwhg7.jpg
04-26-2007, 05:40 PM
aclim

That doesn't look to bad. Of course u are on water. I hope my U-120 extreme can do something close to that....
04-26-2007, 05:51 PM
demenion

Any more results with the L649G batch? I just got two 6600s from ZZF but don't have a mobo to test yet.
04-26-2007, 06:21 PM
rossel21

As demenion stated does anyone have results for the L649G batch from ZZF. I am waiting on memory to install, just wondering how this batch is?

Thanks
04-26-2007, 06:30 PM
sreedx2

2 Attachment(s)

my L709A442 is stable at 3.6ghz 1.48v loaded 12 hours orthos blend, this new chip is pretty flat and very cool .. check out my idle temps
04-26-2007, 07:22 PM
rfisher983

Quote:

Originally Posted by rossel21

As demenion stated does anyone have results for the L649G batch from ZZF. I am waiting on memory to install, just wondering how this batch is?

Thanks

Hey :clap: I have it and its pretty good. Im still testing it, but you'll be able to get 3.6 or higher.
04-26-2007, 08:52 PM
BBA

Quote:

Originally Posted by demenion

Any more results with the L649G batch? I just got two 6600s from ZZF but don't have a mobo to test yet.

I recieved 2 of the same batches as well from zzf also

i havent taken any screenies yet, but i do know that it will do 3.4 with 1.35 vcore (in bios ds3 rev3.3 f11b)

I've ran it at 7x500 @ 1.375 vcore but its not quite stable at the current settings.

Right now im testing at 8x438 3.5 at 1.38 in the bios. Cpu-z and speedfan always read it lower, and i dunno which one to believe.

im using the thermalright ultra 120 extreme and under load at 8x438 and 1.38 vcore is are 25c idle, and 42c fully loaded with orthos.

here is a 7x500 shot cpu validation shot http://valid.x86-secret.com/show_oc?id=191021 7x500
04-26-2007, 09:13 PM
elsupremo

I'm always surprised when newer batches don't OC as well as original ones...logically, I would think that if anything, they would iron out the production process and they would get better, not worse. Weird!
04-26-2007, 11:49 PM
demenion

Quote:

Originally Posted by BBA

I recieved 2 of the same batches as well from zzf also

i havent taken any screenies yet, but i do know that it will do 3.4 with 1.35 vcore (in bios ds3 rev3.3 f11b)

I've ran it at 7x500 @ 1.375 vcore but its not quite stable at the current settings.

Right now im testing at 8x438 3.5 at 1.38 in the bios. Cpu-z and speedfan always read it lower, and i dunno which one to believe.

im using the thermalright ultra 120 extreme and under load at 8x438 and 1.38 vcore is are 25c idle, and 42c fully loaded with orthos.

here is a 7x500 shot cpu validation shot http://valid.x86-secret.com/show_oc?id=191021 7x500

Seems ok, I'm still deciding if I should keep the E6600s or just go with a 4300. I'll be using D9 + DFI 965 + Scythe Infinity. :confused:
04-26-2007, 11:53 PM
Daveb2012

Quote:

Originally Posted by babalouj

3/20/2007. It just passed an hour of prime at 3.6ghz w/ 1.42V.

Man I bought one of those Frys $199 e6600's, I'm praying that this thing is as good as yours, because I just sold a rock solid e6400 to g:stick: et it.
04-27-2007, 12:38 AM
WillyWonka

Quote:

Originally Posted by elsupremo

I'm always surprised when newer batches don't OC as well as original ones...logically, I would think that if anything, they would iron out the production process and they would get better, not worse. Weird!

Intel will be selling $266 quads in Q3 ... they need to build up a stock of good cores. Ergo ... OCability of shipped dual cores suffers.
04-27-2007, 07:07 AM
aclim

Quote:

Originally Posted by BBA

I recieved 2 of the same batches as well from zzf also

i havent taken any screenies yet, but i do know that it will do 3.4 with 1.35 vcore (in bios ds3 rev3.3 f11b)

I've ran it at 7x500 @ 1.375 vcore but its not quite stable at the current settings.

Right now im testing at 8x438 3.5 at 1.38 in the bios. Cpu-z and speedfan always read it lower, and i dunno which one to believe.

im using the thermalright ultra 120 extreme and under load at 8x438 and 1.38 vcore is are 25c idle, and 42c fully loaded with orthos.

here is a 7x500 shot cpu validation shot http://valid.x86-secret.com/show_oc?id=191021 7x500

That looks good. Im shooting for a 3.5-3.6 oc but ill be just happy with a 3.2-3.4 oc. at least i know I should be able to do 3.5 with decent temps, i got the same cooler
04-27-2007, 08:10 AM
burningrave101

Quote:

Originally Posted by elsupremo

I'm always surprised when newer batches don't OC as well as original ones...logically, I would think that if anything, they would iron out the production process and they would get better, not worse. Weird!

It's usually the other way around because the manufacturer gets better at their binning process so the higher overclockers go to the more expensive processors.
04-27-2007, 08:12 AM
burningrave101

Quote:

Originally Posted by demenion

Any more results with the L649G batch? I just got two 6600s from ZZF but don't have a mobo to test yet.

I got one as well from ZZF. I can't test it out until I get ahold of my graphics card though. Trying to hold out to see what R600 does on Wednesday but it's hard to wait lol. I have a Thermalright Ultra 120 Extreme already here and it's going in a new Silverstone TJ09 so I will have some great aircooling going on.
04-27-2007, 08:53 AM
rossel21

Where has everyone purchased the Thermalright 120 Ultra Extreme from? Everywhere I found is sold out/backordered. Thanks
04-27-2007, 09:08 AM
burningrave101

Quote:

Originally Posted by rossel21

Where has everyone purchased the Thermalright 120 Ultra Extreme from? Everywhere I found is sold out/backordered. Thanks

I got mine from Jab-tech. Check TankGuys.
04-27-2007, 10:06 AM
babalouj

Quote:

Originally Posted by Daveb2012

Man I bought one of those Frys $199 e6600's, I'm praying that this thing is as good as yours, because I just sold a rock solid e6400 to g:stick: et it.

My chip is very good and passed 10+ hours of prime blend at 3.6ghz w/ 1.43V.
04-27-2007, 10:16 AM
aclim

Quote:

Originally Posted by rossel21

Where has everyone purchased the Thermalright 120 Ultra Extreme from? Everywhere I found is sold out/backordered. Thanks

Yea I got mine from jab-tech as well. I think svc has em.....
04-27-2007, 02:02 PM
rfisher983

I remember my old athlon 3700+ passed 12 hours of prime. Later I started getting into company of heros and my sound would skip and it would disconnected me in the middle of the game. 6 months later I ran othoros and that test failed in 43 minutes but prime95 passed.

The point - I don't trust prime95. I test using orthos and occt.
04-28-2007, 12:11 AM
Benamin

Got my e6600 the other night and I am just Orthos testing the first OC overnight of 8x400=3200 @ 1.35vcore My load temps are 38c. Oh Ya, this chip is from batch L646G509

By next week I should know what it'll do. I like find my stable way up but it takes forever.

LOL :rolleyes:

Benamin
04-28-2007, 02:18 AM
Daveb2012

Quote:

Originally Posted by rfisher983

I remember my old athlon 3700+ passed 12 hours of prime. Later I started getting into company of heros and my sound would skip and it would disconnected me in the middle of the game. 6 months later I ran othoros and that test failed in 43 minutes but prime95 passed.

The point - I don't trust prime95. I test using orthos and occt.

Same happened to me with a E6400, I slowly degrading from 3.5->3.2 Ghz over time. Prime initially passed me then starting failing me any thing over 3.2..:confused: :slap:
04-28-2007, 04:02 AM
sofarfrome

Not E6600 but...

...I bought a new E6300 from ebay for $130 to use in a back up rig and so far testing has been horrid. Batch code is Q706A and it is orthos blend stable up to 2.64GHz at stock vcore. Going beyond this even with 1.6vcore is impossible. The system will absolutely not boot at 3.0 and orthos fails within 10 seconds from 2.7-2.9GHz no matter how much vcore I pump into it. It appears the chip doesn't like any additional voltage above stock.

The pic on ebay said it was an L629B batch and the one I had before was orthos stable at 3.2GHz with stock vcore. I contacted the seller and hopefully he will trade me for this piece of crap Q706A.
04-28-2007, 06:24 AM
aclim

hey sofarfrome, I see you have the same ram as I have, how high of an O/C have you gotten it up too? just wondering.
04-28-2007, 10:15 AM
nealh

Quote:

Originally Posted by rfisher983

I remember my old athlon 3700+ passed 12 hours of prime. Later I started getting into company of heros and my sound would skip and it would disconnected me in the middle of the game. 6 months later I ran othoros and that test failed in 43 minutes but prime95 passed.

The point - I don't trust prime95. I test using orthos and occt.

Ok..I do not understand this..I "DONT TRUST PRIME95"..

orthos is nothing more than Prime95 with GUI

BTW I use Prime 95 v251..which easily runs both cores on C2D or all 4 cores on a quad
04-30-2007, 02:59 AM
M@T!Z

hi, my E6600 which I bought last friday:
http://img209.imageshack.us/img209/7...os37sf7.th.jpg
It's L640F037 non selected, 3700MHz with 1,362V real in load. Air cooling by Tuniq Tower 120.
04-30-2007, 07:21 AM
bro20000

M@T!Z Where did you buy that from!
04-30-2007, 10:35 AM
DEVIL K-ce

Quote:

Originally Posted by bro20000

M@T!Z Where did you buy that from!

My golden hand shoot this 6600 :D

Handpicked, but no open box ... :)

CPU is from Poland.

Martin
04-30-2007, 11:55 AM
Plester

L640A, does 3.6 w/ 1.55v bios (actual 1.52v) on a BadAxe. Runs 7-8c cooler than L628A that does 3.6 w/ 1.52v bios, (1.48v actual). Koolance H20 cooling.
04-30-2007, 06:45 PM
dinos22

got another one guys

CPU: E6600 (batch# L629F122)
Mobo: Asus P5B Deluxe WIFI 1004 bios
Cooler: Stock Intel air cooler :)
Ambient temps: 20C

http://img253.imageshack.us/img253/8...teppinglo4.png

3.5GHz 1.45v Load Orthos Stable 1 Hour
http://img261.imageshack.us/img261/4...lendloanl7.png

i run it at 3GHz 1.21v load stable at the moment for normal windows usage :)
http://img440.imageshack.us/img440/1...lendloanb3.png

FSB Test 520MHz 8M SuperPI no problem
http://img408.imageshack.us/img408/9...8msupercv9.png

530MHz FSB max
http://valid.x86-secret.com/show_oc?id=192666

http://img263.imageshack.us/img263/7...fsbtestih2.png
05-01-2007, 04:19 AM
aldamon

Quote:

Originally Posted by WillyWonka

Intel will be selling $266 quads in Q3 ... they need to build up a stock of good cores. Ergo ... OCability of shipped dual cores suffers.

That doesn't make any sense. The Q6600 and E6600 are the same speed.
05-01-2007, 06:01 AM
japgar

E6600 comming from newegg this thursday. Will post as soon as it arrives.
05-01-2007, 06:30 AM
dnottis

Quote:

Originally Posted by japgar

E6600 comming from newegg this thursday. Will post as soon as it arrives.

Mine will be here Friday - awaiting your results! :D
05-01-2007, 10:56 AM
Bei Fei

I recieved 2 chips from newegg in the past two weeks. So far I have been able to play with one. I have been able to get it stable @3429 with 1.4 volts. The batch is in my sig. My other chip is currently running at stock speeds until I can get another cooler.

My second rig is used for solidworks.

E6600 L645G344 no overclocking :nono:
Stock Cooling waiting for a better cooler
Evga 680i TR P27
Nvidia Quatro FX4500
Gskill 4x2GB CAS6 Sticks
PC&P Siliencer 750
Silverstone TJ06
Windows xp Pro 64bit
05-01-2007, 12:00 PM
dogsx2

[QUOTE=dinos22;2162499]got another one guys

[B]CPU: E6600 (batch# L629F122)
Mobo: Asus P5B Deluxe WIFI 1004 bios
Cooler: Stock Intel air cooler :)
Ambient temps: 20C

http://img253.imageshack.us/img253/8...teppinglo4.png

LOL, nice cpu dinos. However, the title of the thread is:

Quote:

New E6600 batches, post your Overclock

629F is a little long in the tooth like its owner.:p:
05-01-2007, 02:12 PM
lowfat

Received a 711A today, testing on stock air cooling for now. Testing it now.
05-01-2007, 03:25 PM
Cobrac

Quote:

Originally Posted by dnottis

Mine will be here Friday - awaiting your results! :D

Mine will be here next wednesday , hope i get a good batch.
05-01-2007, 03:33 PM
dogsx2

L640F030 6600

I put it in my Microfly on an Abit F=190HD and thought it was the poorest clocker I ever had. Was about to ebay it but tore apart another rig with a DS3 mb. It takes more juice then I would like but it runs very cool with just a TT BT. SPi is just to show stability. Please no grumbling.:nono: We all would like 3600@1.4v but it aint going to happen.:(

http://img118.imageshack.us/img118/2...232mbd2.th.jpg
05-01-2007, 04:00 PM
Peter949

Wow...I bought a L640F on ebay and hope it clocks like that.
05-01-2007, 04:02 PM
dinos22

[QUOTE=dogsx2;2164094]

Quote:

Originally Posted by dinos22

got another one guys

[B]CPU: E6600 (batch# L629F122)
Mobo: Asus P5B Deluxe WIFI 1004 bios
Cooler: Stock Intel air cooler :)
Ambient temps: 20C

http://img253.imageshack.us/img253/8...teppinglo4.png

LOL, nice cpu dinos. However, the title of the thread is: 629F is a little long in the tooth like its owner.:p:

true that but it counts as new in my household :D
05-01-2007, 06:38 PM
dnottis

Quote:

Originally Posted by dnottis

Mine will be here Friday - awaiting your results! :D

I just checked tracking - my 6600 will be here Thursday now!!!
05-01-2007, 06:56 PM
jws2346

Quote:

Originally Posted by dnottis

I just checked tracking - my 6600 will be here Thursday now!!!

If the tracking thing is on time I know 2 people getting a E6600 from the egg on Thursday. I just checked my tracking and it said Thursday. I hope they're good batches. This makes my second E6600, I'll be able to compare it with a L632B444 That's if I don't get the same batch which I probably won't. I was so satisfied with the first one, after a mobo change, I went ahead and ordered another one. (I almost ordered another E6420, but figured I'd be pushin' my luck. :D)
05-01-2007, 10:32 PM
burningrave101

I've got my L649G979 batch E6600 from ZZF up and running. Been testing it out for the last little bit and having to learn all the different settings on my DFI P965-S Dark. I've got most settings set to Auto at the moment and Orthos has been running for 35 mins so far at 3.2Ghz with stock voltage. Voltage is set to auto and it's reporting as 1.29-1.3V in the BIOS and Smart Guardian. I'm pretty sure the voltages are fairly tight on the P965-S so default vCore may be 1.3v on this one. I dunno though, I've been out of the loop of things for a while and been on a laptop so this is my first desktop in almost a year lol.
05-02-2007, 03:26 AM
dogsx2

L640F030 6600

Low volts 3.0@2.568v prime for 9.5 hours. One core failed at 9.5 hours but it is still good. I never worry about a failure after 4 or 5 hours.

http://img157.imageshack.us/img157/5...568vaz7.th.jpg
05-02-2007, 03:42 AM
cowie

me and 3 friends got l6xxf from the egg in the last three weeks,but all of us are from new jersey and they came from the south river warehouse all go 3.6-7 on air.the forth got a l7o7a 3.3 on air
05-02-2007, 05:00 AM
nealh

Man..so hard to tell if I should go with e6600 or e6420...OCing seems more unpredictable these days

Cowie...what vcores are l6xxf and l707a using
05-02-2007, 05:06 AM
aclim

I should have my OC results by this weekend, been soo busy haven't had a chance to fool with it.
05-02-2007, 06:19 AM
dnottis

Quote:

Originally Posted by cowie

me and 3 friends got l6xxf from the egg in the last three weeks,but all of us are from new jersey and they came from the south river warehouse all go 3.6-7 on air.the forth got a l7o7a 3.3 on air

checked my tracking -

NJ Warehouse
7B Brick Plant Rd.
South River,NJ 08882

W00t!
05-02-2007, 07:26 AM
silverphoenix

Quote:

Originally Posted by dnottis

checked my tracking -

NJ Warehouse
7B Brick Plant Rd.
South River,NJ 08882

W00t!

rofl My motherboard is getting shipped from the same warehouse, I thought I might have to wait till next week if it get's shipped from Cali since I live in NY. But it was shipped today and arriving tomorrow whee!!
05-02-2007, 11:50 AM
akajay

got my E6600 L646G494 400x9 3.6GHz 1.5v Bios 1.448v Cpu-Z Pencil Mod.

about 60-63c orthos with a Zalman 9500 waiting for my water kit to come tomorrow and see if i can get the volts and temps down.

it can do 350x9 with about 1.35v i cant believe it would need that big of a jump just to be stable at 400x9.

oh yeah its orthos stable for 12+ hours i was just trying to tweak the memory timings before.

http://img234.imageshack.us/img234/9175/c2dshj7.jpg
05-02-2007, 12:49 PM
Andrew LB

Well guys.... my E6600 (see sig) is currently stuck at 3.3ghz @ 1.45v. Max load with my enzotech ultra-X is 51'c using Orthos. Any CPU speeds faster have resulted in a failure in Orthos.

How high can I ramp up my V-Core on the CPU with this good cooler before I have to start worrying about damaging my CPU? I've been an AMD guy for the past 5 years and am just learning how to OC intel chips.

Thx.
05-02-2007, 01:21 PM
sreedx2

Quote:

Originally Posted by bgrenco

This is my first c2d build and I am still learning about how to oc this chip and Gigabyte ds3. Sorting thur lots of reading on the forums!! May try tonight to get ot higher . Being on the conservative side for now.

Quote:

Originally Posted by lowfat

Received a 711A today, testing on stock air cooling for now. Testing it now.

what are your guy's temps like, list you cooling as well

Just wondering because my L709A442 is so cool on water with high Vcore I dunno if I trust it ?
05-02-2007, 02:18 PM
cowie

Quote:

Originally Posted by nealh

Man..so hard to tell if I should go with e6600 or e6420...OCing seems more unpredictable these days

Cowie...what vcores are l6xxf and l707a using

well my L632f is 1.35 same for my bud on the phone with his l630f
others i did not ask
05-02-2007, 02:22 PM
cowie

Quote:

Originally Posted by dnottis

checked my tracking -

NJ Warehouse
7B Brick Plant Rd.
South River,NJ 08882

W00t!

please post when it gets there
btw its mostly next day if you order a newegg cpu from jersey and it comes from s.r warehouse even if tracking tells you otherwise
getting a e67 this week me thinks so i'll see if they continue the fast service
05-02-2007, 02:55 PM
experttech2007

CPU: E6600 2.4 Ghz
Batch: L701C326 (Packed 3/20/2007) Made in Malaysia
OC: 3,200 Mhz (400x8)
VCore: 1.3875
05-02-2007, 03:33 PM
dnottis

Quote:

Originally Posted by experttech2007

CPU: E6600 2.4 Ghz
Batch: L701C326 (Packed 3/20/2007) Made in Malaysia
OC: 3,200 Mhz (400x8)
VCore: 1.3875

cmon now, lets get some real OC going ;)

Where was it from?
05-02-2007, 03:37 PM
experttech2007

Quote:

Originally Posted by dnottis

cmon now, lets get some real OC going ;)

Where was it from?

Newegg.com

And I simply cant get it stable above that (probably because fo my RAM timings?) 400x9 simply doesnt work. Any other recommendations??
05-02-2007, 03:55 PM
japgar

Just received the majority of my gear, however nothing installed yet. Still waiting on the Thermalright Ultra 120 and Lian li A05. CPU is a L647G. Looking at this thread I hope it overclocks nicely. Will post once everything is up and running. :) http://www.xtremesystems.org/forums/...ighlight=L647G

http://img444.imageshack.us/img444/5826/img0619yf8.jpg
05-02-2007, 04:04 PM
OmegaRace

Recent purchase from new egg, E6600 @ 3.4 on Air

Batch:
> SL9ZL
> 2.4GHZ - 4M/1066/06
> L631F577

vCore 1.4
Asus P5B Deluxe
G.Skill F2-6400CL4D-2GBPK @ 1.95v
Arctic Cooling Freezer 7 Pro

Been running 3.4 for a week now, stable so far. Tried for 3.6ghz, Orthos quickly blue-screens windows.

Idle:
http://voigtnet.com/C2D/OC/cpu378-3.4ghz-idle.jpg

Load:
http://voigtnet.com/C2D/OC/cpu378-3.4ghz-load.jpg
05-03-2007, 11:57 AM
dnottis

05/03/2007 DELIVERED[D] - but I am work... :(

Let's see what you guys got and what kind of OCs they pull!!!
05-03-2007, 02:37 PM
aclim

well I did a little OC today

its a L644G425 packing date of 3/26/07

i was orthos stable for 4+ hours today with

400x8= 3.2
1.47v
max load temp was @ 51c using a U-120 extreme

im gonna try for a 400x9 and see if I can get 3.6 out of this chip. Dunno because i failed after half hour with 1.45v with the same above. i dont wanna go over 1.5v to get 3.6. well see.
05-03-2007, 02:41 PM
dnottis

Quote:

Originally Posted by aclim

well I did a little OC today

its a L644G425 packing date of 3/26/07

i was orthos stable for 4+ hours today with

400x8= 3.2
1.47v
max load temp was @ 51c using a U-120 extreme

im gonna try for a 400x9 and see if I can get 3.6 out of this chip. Dunno because i failed after half hour with 1.45v with the same above. i dont wanna go over 1.5v to get 3.6. well see.

Was this one of the ones that came from Newegg today?
05-03-2007, 03:55 PM
burningrave101

My ZZF L649G979 seems to be solid in Orthos at 3.6 with 1.45v. I tried for 1.425v and Orthos caused a machine exception BSOD.
05-03-2007, 04:10 PM
dnottis

Quote:

Originally Posted by burningrave101

My ZZF L649G979 seems to be solid in Orthos at 3.6 with 1.45v. I tried for 1.425v and Orthos caused a machine exception BSOD.

Thats not bad though, 3.6 is nice.
05-03-2007, 06:57 PM
aclim

Quote:

Originally Posted by dnottis

Was this one of the ones that came from Newegg today?

no I got that chip from zzf last week
05-03-2007, 07:03 PM
HousERaT

Quote:

Originally Posted by burningrave101

My ZZF L649G979 seems to be solid in Orthos at 3.6 with 1.45v. I tried for 1.425v and Orthos caused a machine exception BSOD.

not bad....... where did you get it?
05-03-2007, 07:23 PM
Andrew LB

Quote:

Originally Posted by burningrave101

My ZZF L649G979 seems to be solid in Orthos at 3.6 with 1.45v. I tried for 1.425v and Orthos caused a machine exception BSOD.

Man.... how did you get your chip that high? I've got a L647G413 E6600 and can't get it Orthos stable past 3.3ghz even with 1.475v. My current voltage on the chip is 1.4v Are there any other things you're over volting to get those speeds? I'm an intel noob, and haven't really gotten into all the other bios adjustments on my board yet. I'm not sure what is safe volts and what isn't.
05-03-2007, 07:41 PM
CPLB

Quote:

Originally Posted by Andrew LB

Man.... how did you get your chip that high? I've got a L647G413 E6600 and can't get it Orthos stable past 3.3ghz even with 1.475v. My current voltage on the chip is 1.4v Are there any other things you're over volting to get those speeds? I'm an intel noob, and haven't really gotten into all the other bios adjustments on my board yet. I'm not sure what is safe volts and what isn't.

I've been running 1.525V through my E6600 for a few months and it seems ok, but I really don't know how much us too much. I'm using a TR SI-128 and it hits 62C load with Orthos.
05-03-2007, 07:53 PM
Andrew LB

Hmm.... tomorrow morning i'll try ramping up the speed a little higher with more voltage and see what happens. I wasn't sure how much higher than 1.5v is safe on these chips.

I've got great cooling. My Enzotech Ultra-X keeps my load temps during Orthos @ 49-50'c max. I can get the computer to boot at 3.4 and 3.5ghz but i always get an error when testing with Orthos.

But.... at those same speeds with 1.475v I was able to run vista fine and play a few hours of Oblivion @ 1920x1200 with 8xAA and 16xAF just fine with the TOTO high resolution texture package installed. It's without a doubt the most taxing game I've ran to date.

I'll try 1.525v tomorrow and perhaps a little more as long as my temps stay reasonable.
05-03-2007, 09:07 PM
rfisher983

Update:

e6600 49G from zzf @ 1.50 (1.48 load) @ 3711 412x9. Orthos and OCCT Stable. Thermalright eXtreme 30c idle 57load in 80 degree room with lapped cpu :)
05-04-2007, 05:06 AM
aclim

Quote:

Originally Posted by rfisher983

Update:

e6600 49G from zzf @ 1.50 (1.48 load) @ 3711 412x9. Orthos and OCCT Stable. Thermalright eXtreme 30c idle 57load in 80 degree room with lapped cpu :)

thats very nice. im testing 400x9 today.
05-04-2007, 05:38 AM
dnottis

mine is pissing me off, 3.55 @ 1.52v. my 6420 was as bad, my 6300 does 3590 under 1.4v. these 4mb cache chips need mad volts! :mad:
05-04-2007, 06:58 AM
Arkangyl

L644G e6600

3ghz (333x9) barely stable with 1.4v

I've given it up to 1.5v and with that 3.15 is semi-stable, 3.2 posts but isn't stable at all. It's depressing to see all the 400x9's that post, I can't post higher than 3.3

I'm hesitant to try anything higher voltage wise since I'm only on air cooling (Scythe Ninja). Also, it's always core 1 (0 & 1) that fails the tests, I'm wondering if there's something wrong there.
05-04-2007, 07:05 AM
dnottis

Let me eat my words.

Not knowing much about higher end chips like the 6600, I was trying to force 400 x 9 and even at 1.6 volts had no luck. Then something hit me, the charts with the FSB speeds and high the chipset being tighter at 400 mhz than say 420 mhz. So I dropped the multiplier to 8 upped the FSB and dropped the volts. Right now 3.6 is running orthos at only 1.5v, load dropped ~6 deg to 44 at 450 x 8.

So for those of you that have forgot about the chipset latencies being tighter; also my cpu temps were hotter at 400 mhz, try dropping the mult and see what happens!!

I'll give a report when I get more results.

http://www.3dxtreme.net/other/ontap/E6600/IMG_4145.jpg
05-04-2007, 07:14 AM
dnottis

http://www.3dxtreme.net/other/ontap/E6600/3800.jpg
05-04-2007, 08:16 AM
aclim

very interesting dnottis. im gonna give that a try because i was trying for 400x9 but i kept failing orthos even with 1.5v . im gonna give this a try. Thanks
05-04-2007, 08:20 AM
HousERaT

dnottis: are you able to get the same performance @3800Mhz as you got @3600Mhz? I'd like to see some benches at 3.8Ghz 8 multi vs your best clocks @ 9 multi just to see if it's worth it.
05-04-2007, 08:23 AM
dnottis

Quote:

Originally Posted by HousERaT

dnottis: are you able to get the same performance @3800Mhz as you got @3600Mhz? I'd like to see some benches at 3.8Ghz 8 multi vs your best clocks @ 9 multi just to see if it's worth it.

3.8 was nothing more than a suicide 1M run ;)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:49 AM.

XtremeSystems