Xtreme Twinmos Memory!

http://mitglied.lycos.de/coolinglimi...er/Cooler3.jpg

That is unreal!

/me drools

That is some might fine work there, isn't it?

I just had to share it.

Quote:

---

Originally Posted by death metal

tnx reefa

---

You are welcome.

All of our thanks go to they guys that have done the hard work of identifying these chips.

The rest of us are just out on a hunting expedition.

Fed ex came. so, I will have the twinmos SP 512 sticks and my 2nd 256 stick when I get home! Everyone let's just take a moment for a silent prayer to the overclock gods.

Quote:

---

Originally Posted by trans am

Fed ex came. so, I will have the twinmos SP 512 sticks and my 2nd 256 stick when I get home! Everyone let's just take a moment for a silent prayer to the overclock gods.

---

Sorry dude, I'm saving all my prayers for mine! :D ;)

Seriously though, good luck with them :toast:

Quote:

---

Originally Posted by trans am

Everyone let's just take a moment for a silent prayer to the overclock gods.

---

Next step is human sacrifice. :eek:

Quote:

---

Originally Posted by trans am

Fed ex came. so, I will have the twinmos SP 512 sticks and my 2nd 256 stick when I get home! Everyone let's just take a moment for a silent prayer to the overclock gods.

---

i wish the best! :toast: :toast:

I edited the first post so that we have everything tha is confirmed so far on what chips to look for!

Quote:

---

Originally Posted by death metal

so, can someone make it simpler? i've read the thread from start to finish, and still confused. howver, what i gathered:

(*) Twinmos SpeedPremium
(*) Two Dots marking
(*) AA4T (not AADT)
(*) Metal Dots
(*) 44D (or 50D) TMD marking

So, did I miss or screw something here? What else do I need to check? I can only check for these markings at the store without actually needing to plug them in a PC. Thanks...

---

- 2 Dots
- AA4T
- 2 Metal dots on both sides
are correct

but, the ram doesn't have to be speed premium ! I have standart twinmos ;)
and they aren't only 44D and 50D. mine are 60D :D

Quote:

---

Originally Posted by X-GeN

- 2 Dots
- AA4T
- 2 Metal dots on both sides
are correct

but, the ram doesn't have to be speed premium ! I have standart twinmos ;)
and they aren't only 44D and 50D. mine are 60D :D

---

I would say speed premium after week 46 2004

Quote:

---

Originally Posted by trans am

I would say speed premium after week 46 2004

---

so how does mine do over 265mhz 2-2-2-5 ?

Quote:

---

Originally Posted by X-GeN

so how does mine do over 265mhz 2-2-2-5 ?

---

I'm saying if you want the chips on speed premium look after week 46. this could be when twinmos decided to use utt on the speed premium series.

Quote:

---

Originally Posted by trans am

I'm saying if you want the chips on speed premium look after week 46. this could be when twinmos decided to use utt on the speed premium series.

---

ok now I understood :D

Quote:

---

Originally Posted by Reefa_Madness

Hey Rabbi,

Here we go again, chasing down a specific ram at every online retailer known to man. Weren't we doing this not too long ago?

---

hehehehe, I still have those Micron sticks in my draw... actually trying to sell them now that I have VX.
this is what it's about for those of us without piles of coin though.... wait for the "budget" series and pray for a gem!
Good to see you again bro :)

Quote:

---

Originally Posted by Rabbi_NZ

hehehehe, I still have those Micron sticks in my draw... actually trying to sell them now that I have VX.
this is what it's about for those of us without piles of coin though.... wait for the "budget" series and pray for a gem!
Good to see you again bro :)

---

Word!
I have the money, but it's so much more rewarding finding inexpensive products and making them perform on par or better than the pricey components. Isn't that what overclocking is in the 1st place?

Quote:

---

Originally Posted by trans am

Word!
I have the money, but it's so much more rewarding finding inexpensive products and making them perform on par or better than the pricey components. Isn't that what overclocking is in the 1st place?

---

Yes it is...

here's where i am after 1 night of burn-in :D

EDIT: This is from the link you posted earlier in this
thread(Newegg)
EDIT#2
here's what i got...PC3200-256(DDR400)U-Dimm 184 PIN
Model# TMSP400/256
I'm just assuming that "U-DIMM" means UTT/Winbond ???

Quote:

---

Originally Posted by seldomsean

Yes it is...

here's where i am after 1 night of burn-in :D

EDIT: This is from the link you posted earlier in this
thread(Newegg)

---

how many volts? this is 1 256 stick of speed premium?

Quote:

---

Originally Posted by trans am

how many volts? this is 1 256 stick of speed premium?

---

Im burnin with 3.10...

And yes this is the same 256Stick you first recevied
EDIT: See my post edit for the Model#

@ seldomsean

O/T, what is that funky taskbar in your screen shot? :slobber:

looks quite smart, I'm not sure if i'd use it myself though

What is the max you found? I started at 3.4v@250mhz and worked my way up to 270mhz, then backed it down to stable speed od 267 and then looped memtest86 for 24 hrs for burn in. I'm anxious to see what your max is with the same configuration. We are both using the same boards.

Is that some kind of Nintendo Super Mario task bar?

I got my final response form ADATA....


"Nope, all our DDR modules have only one small circle mark at the bottom
right hand corner of the IC. I checked the DDR 333, 400 modules (128,
256 MB)."



Stephen Su

A-DATA Technology (USA)

I'm sorry for asking so many times, but does anyone know where to buy TwinMOS memory in Canada? Duty from the US is killer...

EDIT: I've found these cheapo memories (I've read this entire thread, but I'm still a little confused about where Kingston Value stands.)

512MB PC3200 Kingston ValueRAM at NCIX.com (CAS 2.5 version)

512MB PC3200 Kingston ValueRAM at Tigerdirect.ca (CAS 3 version)

512MB PC3200 Infineon cheapo at NCIX.com

Infineon has the rights to Winbond's chips, right? Is there a chance that there may be Winbond UTT on their OEM stuff?

I'm just throwing ideas around here... I'd really like to hear if anyone knows where to get TwinMOS stuff in Canada. I'll do some more Googling and see if I can't find a source.

ok two of my friends already got winbond UTT from the speed premium :banana: :banana: :banana:

lucky them.... :toast:

http://www.geocities.com/nastechxtre...z_2225_mem.jpg

http://www.geocities.com/nastechxtre...636_resize.jpg

http://www.geocities.com/nastechxtre...med_resize.jpg

Quote:

---

Originally Posted by mcnbns

I'm sorry for asking so many times, but does anyone know where to buy Twinmos memory in Canada? Duty from the US is killer...

---

I found a bunch of twinmos mems new on ebay. Maybe find some and ask seller about circles. As far as Canada goes, I'm not much help. Why not contact Twinmos and ask if they have Canadian resellers.

Quote:

---

Originally Posted by tictac

ok two of my friends already got winbond UTT from the speed premium :banana: :banana: :banana:

lucky them.... :toast:

---

I think that is what's is waiting for me at home.

Quote:

---

Originally Posted by trans am

What is the max you found? I started at 3.4v@250mhz and worked my way up to 270mhz, then backed it down to stable speed od 267 and then looped memtest86 for 24 hrs for burn in. I'm anxious to see what your max is with the same configuration. We are both using the same boards.

Is that some kind of Nintendo Super Mario task bar?

---

@ trans am...

No it's not Nintendo but now that you mention it "Sure looks like it"
My 8year old put that there :D Well i haven't tried to find my Max
yet but i will do it now ;) Also change out the "Theme" :eek:

I will post a screenie of what i can get(Max)
In the meantime have you seen this thread...http://www.xtremesystems.org/forums/...ad.php?t=49660
267@2.0-2-2-x Dual Channel(939) :banana:
EDIT: Ahh TicTac beat me to it ;)

seldomsean,
up your vdimm to at least 3.2v to get those modules clocking right... my VX did jack until I gave them over 3.0v... 3.2v is when they made the biggest MHz increase.