nope not with these sticks.. dont know why maybe its a bios clitch..OR these ozc Flex XLC 9600 stick just suck so badlyQuote:
Originally Posted by T.B. 1
Printable View
nope not with these sticks.. dont know why maybe its a bios clitch..OR these ozc Flex XLC 9600 stick just suck so badlyQuote:
Originally Posted by T.B. 1
thank you ;)Quote:
Originally Posted by Solarfall
0901 Bios is on the Asus web site. I will try it and report back.
try 500FSB /1200 mhz on the ram Solarfall, you can have a a way lower PL then... 1:1 is usually locked at 10 PL... good rams are a MUST on these P45's....Quote:
Originally Posted by Solarfall
yep i know dont worry i have a set of nice cellshock 8000 sticks that can do 4-4-4-4 on 1200mhz :DQuote:
Originally Posted by Leeghoofd
0901 bios is just fine so far. A problem I had with resuming from sleep mode with fsb higher than 422 is resolved. The bios seems stable so far. I just ran OCCT at 4.2 ghz for one hour stable.
Which 4GB set would you recommend?Quote:
Originally Posted by Leeghoofd
Going for G.Skill F2-8800CL5D-4GBPI DDR2-1100 4GB or GEIL BlackDragon EVO ONE PC2-8500(DDR2-1066MHz)/4GB
Crucial Tracers runs OK in this mobo?
Buy CellShock "Red Devil" ;)
Just got this new set up and I can't get my E8400 to run at 3.0ghz (stock speed). I've already set both C1E and IST to off, but cpu-z shows my speed at 2.0ghz and a multiplier of 6. Is this a problem with the mb or the cpu? :(
Quote:
Originally Posted by bikebuilderdude
This is normal as the new intel CPUs have power saving features. Load a program and watch CPU-Z. It will then show briefly the "correct" speed.
:up:
but he said that he turned off both C1E and IST in BIOS so it shouldnt be reducing his multiplier.Quote:
Originally Posted by folklore11
Is anyone running a E8600 on this board yet?
Just pickup a E8600 here today in Japan but was told that the board needs a bios update to run it as the E8600 comes with the E0 stepping
Guys im having trouble with the Sound, i get no sound whatsoever. I went to the Asus site to download the sound drivers for this board, and when i try to install it i get a "Hardware incompatible" error. Is any1 else having this problem or is it just me?
This is of course the sound card that came with the board.
Try the drivers on the disk that came with the board - they work for me.
Where are the sound drivers? i looked all over the CD and cannot find anything!
Did you install the sound card in the black pci slot ? If not That's your problem :D
Dude, install the card into black PCI-E slot.Quote:
Originally Posted by mussafry
yeh, Stupid me i thought it didnt matter. The thing is that when the card is in the Black slot, it doesnt allign with my case, so i put it in the other slot. I cant mout it on cuz it doesnt allign. I tried untightening the mobo screws and shifting the mobo but it didnt help. Its not the case because i had no problems with the board before this one (Same board, had to RMA it)Quote:
Originally Posted by WaterFlex
But its working, and ive got sound now. It just looks bad when looking at the case -_- ill take pictures tomorrow.
Thanks though!
I`m glad you`re ok now ;) Good luck mate.
Mussafry: Thank you for pointing that out. :up: I have tried everything I can think of, but have had no luck in fixing it, so time to RMA both. :(Quote:
Originally Posted by mussafry
This is my review :d
http://www.sx-team.com/index.php?opt...ploe&Itemid=54 :)
Pity there`s no English :(Quote:
Originally Posted by Spacemaster
No :(, but this is the important pages that doesn't need translation ;)Quote:
Originally Posted by WaterFlex
http://www.sx-team.com/index.php?opt...4&limitstart=5
http://www.sx-team.com/index.php?opt...4&limitstart=6
Yeah! M2f is very good mobo! Mate, tell me please, what are your temps at NB and SB ?