i'm testing my CABNE 0540 APMW from Computersmsa...
result so far is superpi 1m @ 2300mhz @ 1,344V.
Only my HD got corrupted. pc rebooted during my latest superpi run.
so i'm installing windows again right now :)
Printable View
i'm testing my CABNE 0540 APMW from Computersmsa...
result so far is superpi 1m @ 2300mhz @ 1,344V.
Only my HD got corrupted. pc rebooted during my latest superpi run.
so i'm installing windows again right now :)
148 cabye 0536 xpmw
is this a good one?
new 32M run with my new 2GB OCZ EB DDR 500
http://mitglied.lycos.de/freestylerc...200MHz@32M.JPG
free
Great clocks, nice RAM!! :up:
I ended up with a superpi 1m at 2772,29MHz @ 1,47V with the boxed cooler that came with my FX :) Not to bad i guess...Quote:
Originally Posted by Jack
i tried higher vcore, but temps rose to 45 C during a superpi run...
Next week PhCh results :D
CABNE 0540 APMW
2.88 GHz (9*320) @ 1.47V -> Errors after 20min of Prime 95 Small FFT's, so stable for few hours @ 2.871 GHz (9*319).
I will test more in few times, need time ! only 24h/day :(
just recieved my CABYE 0536GPMW today. yeah, Compumusic packaging had NO padding whatsoever and was packaged in a Western Digiatl box for some reason. The box had 2 straps around it with "Check contents for damage before signing" printed on the straps :lol:
just waiting on my mobo back from RMA now...
freestylercs - what stepping and cooling is that rockin chip on?
That's great ram, sure beats 3-3. You must have a great wc system. Nice rig. I'm glad to see a few of the 144's clocking so good.Quote:
Originally Posted by freestylercs
I just got two of the exact same stepping from EWIZ...... will let you know how it turns out.Quote:
Originally Posted by 5-Clicks
What's your stepping?Quote:
Originally Posted by Pt1t
CABNE0540APMW from computersmsa :DQuote:
Originally Posted by toreide
Thanks. I just finished a burn in at 2900 stock volts for 10 hours. Im gonna see if there are any results yet, however in the past in took about a week before I could start undervolting.Quote:
Originally Posted by wickedld9
njykid, I have a different problem, I have problems running at anything BUT 1:1. Im running 623-3 with TCCD in the orange slots.
Still no XPMWs tested...?
Here's the best spi 1m so far on my CABNE 144.
http://img485.imageshack.us/img485/2580/265945qh.th.jpg
damn !Quote:
Originally Posted by dogsx2
wish my 3 comming 144 will be CABNE :eek:
awesome cpu :clap:
CPU: 0530APMWQuote:
Originally Posted by 5-Clicks
only normal watercooling without Heatspreader, 80mm fan on the rams.
free
Slightly off topic from the thread, but my PC was feeling photogenic tonight so I thought Id drop a pic. This is what houses my Opty...
http://www.xtremesystems.org/forums/...id=39154&stc=1
[QUOTE=LexDiamonds]Slightly off topic from the thread, but my PC was feeling photogenic tonight so I thought Id drop a pic. This is what houses my Opty...
this thing is HUGE ;)
Quote:
Originally Posted by Supertim0r
The ladies like it...
144 CABNE 0540 APMWQuote:
Originally Posted by toreide
:D one little 32M Before Work :banana:
http://users.skynet.be/pt1t/144/32M_3010mhz.PNG
OT:
Lexdiamonds: that's the best PC in the world, woot:)
Are you sure? Look at this screenie from G.S Technician on the G.Skill 2GBZX DDR400 2-3-2-5 Test thread.Quote:
Originally Posted by dinos22
http://premium1.uploadit.org/gskill/...est_200_01.JPG
"Wried" indeed.
Thats good to see, I've got a 144 cabne on the way of 0540 batch. Nice to see they are still reaching 3ghz. Problem I have now it weather to keep and use the 144 cabne with it's 9x multiplier as I don't think my ram will reach much higher than 310htt speeds. I also have a 148 cabye which will do 3ghz at 1.65v 1:1 with my ram at 300htt.Quote:
Originally Posted by Pt1t
My thinking is to sell the 144 and keep the 148 as it makes life easier with the 11x multiplier.
Nick
I got a CABYE 0536 GPMW from ewiz.
This ihs is a tough nut to crack. My venice was much easier to de-cloth. Has anyone else noticed this?
You can run a divider with no penalty unless your mobo doesn't wan't to work with divivers as some peeps have experienced.Quote:
Originally Posted by Nem
These CPU seem to be great overclockers...
I guess it's time to retire my beloved X2 4400+ :)
An interesting screenie indeed...Quote:
Originally Posted by gundamit
amen brotha'.Quote:
Originally Posted by Mr. Tinker
it took me an hour to get one corner undone... and then it was easy as pie.
Damn, my 144 opty (CABYE 0536GPMW) wouldn't even do 2,83ghz on air :(.. And doesn't want to give more than 3,4 v to the ram :(, i'm popping the IHS off tomorrow.
so gundamnit, you pm'ed the gskill guy, what did he say? you found out how to unlock the multi? is it even possible? my god!
...i'd like to know as well! :banana:Quote:
Originally Posted by el rolio
He thinks something was damaged during a bios reset. I asked him to back up his bios and send me a copy. Hopefully I'll get a copy tommorow. If it was a freak accident that did something to his CPU then we're out of luck. If his bios was corrupted ... still long odds on any miracles for the rest of us, but I'll keep you all posted.Quote:
Originally Posted by asianguy80
that's just amazing!Quote:
Originally Posted by dogsx2
OMG. I am such an idiot. My razor blades are so thin, two of them slipped out of the package together, lining up perfectly on top of each other, so my blade was double thick. That's why it was harder this time. Man, I thought I was hot stuff until that happened. At least I got the ihs off nicely.Quote:
Originally Posted by Mr. Tinker
Guys I took a chance on a 150 for the price of a 148, problem though its a CABGE 0534SPMW, prolly the worse that anyone could ever get. Not even worthy of pics, only 10x280 primed 8hrs at 1.425v. Thats with IHS removed on water.
Luckily my friend in need of a new cpu. :clap: I knew I should of held out for a OEM at Monarch.
Quote:
Originally Posted by RacerX
Just because it wont do 3G at 1.4v doesnt mean its a bad cpu.... Slowly edge the volts up to 1.5ish and see waht you get.... 2.8 is a nice start.
2,8GHz at 1.425 was actually very good prior to the opteron era, remember?Quote:
Originally Posted by RacerX
For an opteron it isn't real good.
CABGE seem to be the worse it seems.
Just as I expected I got a CABYE 0536GPMW from Monarch. Right in line with what others are seeing on this CPU I'm pushing a lot of volts into it but the temps are low compared to the other Opties I've tested. 3Ghz seems like a good place to start. I hope it'll crack 3.1 on water.
http://img254.imageshack.us/img254/7354/300x105gh.png
^ did you order retail or OEM?
Retail. I placed it a while ago before word got out on the OEMs. I just let my order sit on back order. Maybe I should have cancelled, but I can't say I'm at all dissapointed with this CPU. How could anyone complain about 3ghz, low temps even if the volts seem high compared to other weeks and steppings. It actually reminds me of some of the Opties showing up in Europe.Quote:
Originally Posted by Jester FPS
Hi, my name is Daniel from www.aquapc.com and this is my contribution ;)
As you can see my 148 is just like the fx57 weeeee lol
http://www.aquapc.com/imagens/Produtos/148vsfx57.jpg
This is my score for the day… tomorrow ill tweak the system.. I think I can reach at least 3.8 / 3.9GHz.
The compressor of the Prometeia is not very well calibrated… with r404a
http://www.aquapc.com/imagens/Produtos/148.gif
Greetings to all of you....
uh. wow. yea. shooting for 3.9 oh k.
Sorry for all the questions, but, what week was it?Quote:
Originally Posted by gundamit
Very nice clocks and welcome on board :toast:Quote:
Originally Posted by DDaniel
Hey! Nice result u have there!Quote:
Originally Posted by DDaniel
I see u have several of these, send me a PM if u have to many and want to sell! ;)
Welcome to XS, nice ss. Are you able to run spi 1m at those clocks? If so I'd sure like to see a ss, if not what is the highest you can run 1m?Quote:
Originally Posted by DDaniel
http://www.aquapc.com/imagens/Produtos/148.gif
. .TUGAS POWA .:toast:
parabens Daniel
tugas a rular em grande :banana:
até os cammons ficam com os olhos em bico :slap:
sorry but i cant write this in english :nono:
anyone think 1.7v would be okay on a BT for just 4-5 mins so i can ATTEMPT to get an ss of 3.1ghz? No load or anything, it'll be on idle the entire time.
i think there no problemQuote:
Originally Posted by DamienKC
with phase change i was run 32m superpi at 1.85 vcore and the cpu still alive
but be carefull with the temps
Alright, so I'm late in the game jumping into this fray. Where can I find a 144/146/148? I found some joker on eBay offering a 146, but I don't know that I'd trust him. None of the vendors where I work have any -- anyone know of anyone who has one (preferably a 146) that they are selling, new? Preferably retail?
Anyway, I can't believe the scores I'm seeing on your guys' rigs. I can't wait to try this thing out on my own -- whoop on my 3500+ a little bit.
Once I finally get my hands on one of these things, I'll start posting my results. If anyone knows where I can find one though, those results will come sooner!! :-P
--Nathan
Did I already report in with my Operon? Sorry if so, can't find a post by me.
My Opteron 148 has exactly the same codes as your Opteron 148 and your FX-57 (CABNE 0528 GPMW).Quote:
Originally Posted by DDaniel
http://www.cons.org/cracauer/miss-cabne.png
I didn't play with it too much, except I know it does 2.9 GHz at stock volts (which appears to be 1.4 V).
Now I am unsure whether I make it a server chip and never overvolt it. I wouldn't like to overvolt and only reach 3.1 GHz. But what if I could reach 3.5?
Decisions, decisions...
Recieved my second 148 cabye today, my first one of these does 3.0ghz 1Mb Super Pi stable. The new one is 1Mb Super Pi stable at 3.1ghz using 1.7v.
http://www.nickgoodall.org/pics/bench/3.1ghz.jpg
27.5 seconds for the 1Mb test.
I've got a 144 cabne coming in the next day or two, can't wait to see how high it will go now
Nick
This i can do easy... no tiimings modified... it was runing 3-3-3 lol
at 3.7 ghz i cant run superpi
http://www.aquapc.com/imagens/Produtos/26daniel.gif
tomorow i´ll try a rdx200 on the promy with a decent power suply, the fFPS Group that i got here it´s not that good...
Nice o/c, but why you use olds versions of CPU-Z ?
i CPU-z shot of 3.7GHz+ will give you a world record OC so get cracking hehehQuote:
Originally Posted by DDaniel
a ss of 3.7 its on this page..
That's pretty amazing the gskill guys opty. All his multi's work and the a64 extensions are there apparently. Also amazing how nobody seemed to notice or care even after Gundamnit pointed it out.
How do you get so lucky as to be a gskill tech so you get pimp ram for free and somehow unlock your opteron at the same time? Unbelievable.
Everybody clear cmos a hundred times and report back.
gundamit:
Please keep us informed :D
Hey guys I have a question.. What is the highest anyone has gotten on their Opty 146? Cuz this is what I just got..
http://valid.x86-secret.com/show_oc?id=46210
wow, that opty clocks higher than most of the opty 148's i've seen. nice work, is it stable?
I only benched at 3.6ghz 1m but didnt try anymore. I just wanted to see how hight it would go. Hell I just stopped it at 3.7ghz I prolly could have gone higher but didnt. I'll give 3.7ghz 1m a try next.Quote:
Originally Posted by Jester FPS
what stepping. cabne no doubt?
Here it is.....
http://img377.imageshack.us/img377/7565/1467mm.th.jpg
hmm, not superpi stable but for a CABGE its a accomplishment. :clap:
What kind of Vcore was that?Quote:
Originally Posted by njkid32
Well I did pump it up but for my cooling it should be ok but not for long periods of time.
http://img458.imageshack.us/img458/3706/cpu37007il.png
isnt that damn close to the world record?^^
Nay, I've seen higher Vcore on a 939.Quote:
Originally Posted by tico
wow. that has me going :slobber: cuz i got the same cpu and all. i just havent gone up to 1.6. thats not for me. good to know that wafer has the potential tho. wow. 3.7, oh my.Quote:
Originally Posted by njkid32
Here is the highest i've taken my opty to (air cooled @ 1.55V): 2.9GHz http://valid.x86-secret.com/show_oc?id=46234
I plan to try for higher, and haven't run prime or superpi yet at 2.9, but at 2.8 it passed occt stability test. This is a totally new board and cpu, so it's having other issues atm with the motherboard and ram compatibility. Also, so far i haven't been able to get this cpu past 41-42°C with prime or occt at 2.8... gonna stress it at 2.9 and see what happens.
Edit: it just failed the torture tests, i guess it needs another bump in vcore.
Anyone clocking those with Vapo LS ? I am just confused , my Opteron 146 (CABYE 0536GPMW) @ 3100MHz , with only 1.55V shows ... +7C loaded :eek: :confused: :stick:
Is it something wrong ? I just dont get it . Remounted evep. couple times and no improvements :( Are they realy THAT Hot ? :eek:
http://img461.imageshack.us/img461/8543/sp20047c0ro.gif
Max. bench speed so far is 3250MHz @ 1.64V , passes 3DMarks and Super PI 1M (didnt try higher yet) . No improvements from going to higher Vcore , probably cause it get too Hot :D ... with Vapo LS ... :slapass: Seems like a bad match for my VX4000 , that wont run over 260 @ 2.0-2-2-5 no matter what voltage i am providing , because of lame dividers . Only managed to get 25.98 super pi 1M , because of low mem. frequency , 232MHz @ 2.0-2-2-5 .... Damn mem. wont run next level of 270MHz ... :mad:
http://img475.imageshack.us/img475/525/25986ma.gif
PS , What is the best BIOS to use with those Opterons and DFI LP UT nF4 SLI-DR ? Any help will be highly appreciated ! :toast:
Awesome temps on my Opteron 146 CABYE 0540 FPBW cooled by only Corsair Hydrocool with 1/4" tubing in 30+ C room temps http://i4memory.com/showthread.php?t=1594
http://www.fileshosts.com/DFI/NF4_Ul...rocool_001.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_009.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_010.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_011.JPG
http://www.fileshosts.com/DFI/NF4_Ul...rocool_015.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_016.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_019.JPGhttp://www.fileshosts.com/DFI/NF4_Ul...rocool_017.JPG
Changed to 510-2FIX bios with 2x256MB Gskill PC4400LE TCCD 431 in Yellow dimm slots and much more stable it seems
Room ambient = 29.5-31.5C right now
CPU idle = 37-38C
CPU load = 48-50C
Opteron 146 CABYE 0540 FPBW Corsair Hydrocool Water cooled
DFI NF4 Ultra-D R.AD0 510-2FIX bios
1x BFG 7800GTX 77.72WHQL drivers
1x 160GB Seagate Barracuda 7200.7 SATA NCQ
Liteon 48x24x48x CD Burner
Floppy drive
510W PC Powercooling SLI psu
WinXP Pro SP2 - very old install left over from DFI NF4 SLI-D i had (haven't bothered to do a fresh reinstall yet)
NF4 6.53WHQL chipset drivers
chipset = 1.6v
LDT = 1.3v
LDT 3x
10x 300mhz 2.5-4-3-7 8-18-2223 at 2.9v
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 8
Row Refresh Cycle Time(Trfc) = 18
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3684
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 7
DRAM Data Drive Strength = Level 1
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(8burst)
http://www.fileshosts.com/DFI/NF4_SL...geFFT_1_tn.jpg
Flashed 623-3 BIOS and it keeps going up ! :woot:
http://img455.imageshack.us/img455/4791/25629ie.gif
Would leaving all the memory timing options in DFI bios to "auto" possibly make the cpu unstable or would it not do that at all?
How does this compare to each of your Opteron 144 CABYE 0536 GPMWs? Lower volts but higher temps? I made it to 3ghz easy with my 146 CABYE 0536 GPMW but the volts beyond that scale up dramatically and the idle temps climb from the low 30s to the high 30s. Load temps in the mid 40s but I think I'll have to go to 1.7v if I'm going to get to 3.1ghz 32M stable. Only one of the 3 Opties I've tested made it to 3.1ghz 32m stable on water. Two of them came up a little short which I suspect will also be the fate of the 146 CABYE 0536 GPMW. How does my 59C MAxTCase rating compare with both your CABYE 0536 GPMWs?Quote:
Originally Posted by eva2000
I have a vapo LS and i am using it with my 148 CABYE 0536- Same bios as you, but i max out at 3355 superPI 1M stable. my cpu temp shows as 200+, is there a way to show the right cpu temp?Quote:
Originally Posted by Gorod
The temp in smart guardian is probably right, but SG can't display negative numbers, speedfan and mbm5 display sub zero temps in the correct format.Quote:
Originally Posted by Tamille
hard to compare due to different rigs and cooling on cpus.. see in my sig 144s are using much better water cooling than 146 right nowQuote:
Originally Posted by gundamit
Opteron 144 CABYE 0536 GPMW #1 maxtcase = 57C
Opteron 144 CABYE 0536 GPMW #2 maxtcase = 59C maxes 3024mhz at 1.68v 32M better clocker than #1 by 30-60mhz
Opteron 146 CABYE 0540 FPBW #1 maxtcase = 59C - currently testing
Opteron 146 CABYE 0540 FPBW #2 maxtcase = haven't tested yet
Has anyone tried this stepping or heard about it:
148 cabye 0536 xpmw
Quote:
Originally Posted by Gorod
i have got the same time at 1M with my 144@H2O
http://mitglied.lycos.de/freestylerc...%20Pi%201M.JPG
free
325mhz 2-2-2-5 must be a record or close.Quote:
Originally Posted by Gorod
that was a glitch with software of courseQuote:
Originally Posted by Tamille
no chance that Winbond will ever run on those timings.............i think he says that RAM was at 232
Ofcourse it was :) CPU-Z got confused :D Real clocks - 232MHz @ 2.0-2-2-5 :)Quote:
Originally Posted by dinos22
FreestylercsIt was ran only for stability porpuses ;)Quote:
i have got the same time at 1M with my 144@H2O
Oh my god! I am tempted with that CABNE Chips? Could anyone help me to find those stuffs... i'm still searching for it...
That's my dream to have one... last upgrade of my life, though!
Finally got my Opty 146! Setting here on desk...
Chip reads:
CABYE 0536GPMW
Hopefully it does as good as the other CABYE's. :D I'll play with it some tonight and tomorrow.
EDIT: I ordered this last week from Ewiz.
Yeah, i orded mine from ewiz too, i also got a CABYE, but i don't recall the rest since i didn't write it down. But i assume it's the from the same batch that eveyone has been been from ewiz. i was able to get into windows at 2.9, but have other issues with my motherboard, so i dunno the full potential just yet. at 2800 it's pretty stable, and i couldn't get the temps past 42°C with any cpu stress test utilities - so i don't think i am being limited by heat.Quote:
Originally Posted by WesM63
my results. I seem to be getting similar stuff as others for the 0530's. (copied it from another thread to put it in it's proper place here)
I'm testing a Opteron 146 0530GPMW from Monarch right now.
I'm thinking something might be wrong with my mobos temp sensor because it seems kind of low. With my Venice 3000, and this Opty146, I can't get near over 50c on load. I'm using an MSI Neo4 Platinum (latest bios), with an XP-90, and a medium speed Panaflo. Should I push my vcore to 1.65-1.7v?
Max tcase: 57c
Opteron 146
2800 @ 1.5v (33c idle, 42 load)
I've tried voltages up to 1.6 and it dosn't seem to get more than 2.83 on air.
Are everybody from the U.S?
Here i EU we cant get these CABNE, and CAYNE are only avalible at the 148.
I can get this one instead of my CABGE :
148 CABYE 0536xpmw
I havent seen anyone posting about the XPMW stepping?
Would this be better that what I have already:
146 CABGE at 1,55V 265x10
Quote:
Originally Posted by mbm
as you can see some posts before i´m from portugal and i have a cabne 148
But are they still avalible in EU?
guys we've started receiving CABYE 0540FPBW CPUs....these bastards are all going over 3GHz ......some even better than CABNE 0530APMW chips i'm keeping my fingers crossed for a good dual core stepping as i ordered one yesterday :woot:
check this one out...prime stable at 1.42v 3GHz (image works when you click on it and then refresh the page ;) )
Quote:
Originally Posted by Lucus Maximus
Are you sure? One of the first was bought in Europe.Quote:
Originally Posted by mbm
:banana:MAN! VERY NICE :clap: :banana:Quote:
Originally Posted by dinos22
I wonder how far a CABYE 0536GPMW would OC.
CABYE is hit or miss, but CABNE is guaranteed to do 3.0Ghz, all 3 of mine did 3.0Ghz with less than 1.50v 17+hr prime stable. My best CABNE has MaxTcase of 67'C and wickedld9 is the new owner now (had already shipped it to him) :D I'm still playing with the 3rd one....MaxTcase only 63'C, the first day it needed 1.50v to do 3.0Ghz, after some burn-in I now can prime it at 3.0Ghz with only 1.45v :D :D
....i think you'll find that these particular steppings i quoted ALL do 3GHzQuote:
Originally Posted by ben805
here is another one....this guys is on tt bigwater so probably same as high end air..........he's got another CPU with same stepping that needs less vcore than this one
also eva2000 posted his 3GHz chip here http://www.xtremesystems.org/forums/...51#post1107351
Quote:
Originally Posted by groovetek
Still not as good as most here but my CABGE is starting to look presentable :clap:
http://home.comcast.net/~phippy1/Opteron.bmp
Those 0540 cabye's are sweet. I love the big oc's with little volts. Nice cabbage 150 too. Probably can go higher. Way better than the 146's have shown so far.
I've got a couple of weird stepping questions so I figure I'll toss them out.
First is Has anyone noticed that these are only even weeks, where are the odd weeks going? Mabye they make 940's one week and 939's the next or perhaps some are fx's?
other question is that everything thats xxMx is supposed to be chips from different batches cobbled together. Is that true, a myth, or doesn't apply to opterons?
The only XXaW's I've seen are the 0536VPAW cabbage oem's that some got from monarch but maybe I've missed something. My spaw was pretty sweet and rumor has it that aw is usually better, true or not?
Lastly what makes something a cabge vs an ne ye? I've heard that fourth letter means a different rev such as y is newer than g in alphabetical order. This doesn't seem to make sense since they are overlapping a lot of these weeks. Are they different production lines or different fabs?
A lot of questions but I figure somebody around here probably knows.