ASUS P5B-Deluxe; Problems & Fixes

Printable View

Show 100 post(s) from this thread on one page

12-03-2007, 10:49 AM
doakh

[QUOTE=chuckbam;2595032]I had problems with the last two bios and slowly went back to #1219. It was very painful. I was getting random problem all due to that Dam ATK0110. I find that is the first thing that gives under any stress. I gave up trying to take it off my system a long time ago.

QUOTE]

How do you go back to a previous bios version? That sounds problematic. I run bios '1216' and do not know what bios will
be needed for 45nm.
12-03-2007, 12:53 PM
chuckbam

[QUOTE=doakh;2600261]

Quote:

Originally Posted by chuckbam

I had problems with the last two bios and slowly went back to #1219. It was very painful. I was getting random problem all due to that Dam ATK0110. I find that is the first thing that gives under any stress. I gave up trying to take it off my system a long time ago.

QUOTE]

How do you go back to a previous bios version? That sounds problematic. I run bios '1216' and do not know what bios will
be needed for 45nm.

You flash the bios, It clears the settings, I clear again, and re-set. You need and older AFUDOS than what is out now. Someone gave me the ver online. I have been rock stable ever since the flash back. Unless I get a new CPU, I am done changing bios with this board. The boot reports a wrong MHz, but utilities report the correct clock and I will live with it. Benchmarks are good, I am happy.
12-04-2007, 04:43 PM
ri3eboi

my 6 months old P5B Deluxe died again

Bought a Gigabyte 3D Mercury watercooling case from Newegg (cauz it was cheap after a huge MIR).

Yesterday finally got some time to move my system over from the old case. After 24 hours of leak testing, the system will not boot up (dual boot, no post screen).

When I power up, all fans are on, the LED on the board glows RED, but no POST screen, No Keyboard LED (cap lock/num lock). I cleared CMOS, removed battery, tried different ram with no luck, I seriously think the board is dead.

This is almost like my first P5B Deluxe, and after swapping out every part (video card, ram, cpu), I had to RMA it and this board came and worked like a charm until now :(.

My system spec:
P5B Deluxe
E4300
2x 1GB Crucial Ballistix PC8000
EVGA 7900GS KO
X-FI
WD Raptor 160GB/150GB

My latest stable OC was 2.97 GHZ 330x9 @ 1.375 vcore.

Once I get a removable PC speaker, will check mobo beeps (stupid Mercury case didn't come with any speaker)

Let me know if there is anything else I can do to revive my system before ordering an ABIT IP-35 Pro from Newegg.

Thanks in advance.
12-05-2007, 11:10 PM
Englihs

Quote:

Originally Posted by chuckbam

What is N/2 Ratio?

I would like an explanation as well.
12-06-2007, 12:13 AM
jonny_ftm

Quote:

Originally Posted by ri3eboi

Bought a Gigabyte 3D Mercury watercooling case from Newegg (cauz it was cheap after a huge MIR).

Yesterday finally got some time to move my system over from the old case. After 24 hours of leak testing, the system will not boot up (dual boot, no post screen).

When I power up, all fans are on, the LED on the board glows RED, but no POST screen, No Keyboard LED (cap lock/num lock). I cleared CMOS, removed battery, tried different ram with no luck, I seriously think the board is dead.

This is almost like my first P5B Deluxe, and after swapping out every part (video card, ram, cpu), I had to RMA it and this board came and worked like a charm until now :(.

Thanks in advance.

If everytime you remove your board it dies, you should really be more careful when touching electronic electrostatic sensitive material ;) I don't see any other reason why it dies

Quote:

Originally Posted by Englihs

I would like an explanation as well.

You need to get a yorfield
12-06-2007, 02:18 AM
ri3eboi

Fixed!

Found the cause of the problem a bad card reader plugged into one of the internal USB headers, removing it boots the system right up. I also electric taped everything on the back of the case.

With the new WC system, I pushed the OC a bit more, rig running at 3.2ghz now @ 1.45vcore 48C idle, 70C load/stress using TAT.

Some shots of the new case :)
12-06-2007, 05:05 AM
chuckbam

Quote:

Originally Posted by Englihs

I would like an explanation as well.

I think provides a multiplier with a .5 fraction. x6.5, 7.5 etc
12-06-2007, 07:39 AM
jonny_ftm

Quote:

Originally Posted by chuckbam

I think provides a multiplier with a .5 fraction. x6.5, 7.5 etc

Again, as I said, you need a Yorfield for that. Multiplier is a built in CPU function, nothing to do with motherboards, unless you have an old P4 CPU or still love AMD
12-06-2007, 08:02 AM
chuckbam

Quote:

Originally Posted by jonny_ftm

Again, as I said, you need a Yorfield for that. Multiplier is a built in CPU function, nothing to do with motherboards, unless you have an old P4 CPU or still love AMD

I did not see that you said anything about Yorfield. I was just saying what I thought it was. I am not going to flash again unless I get a new CPU. And, I don't plan to do that till the new socket comes out.
12-13-2007, 04:11 AM
Ancient1

I was thinking about flashing 1226 , mainly because of N/2 feature , as I am/was hoping for somewhat better OC options .
but after reading here , it seems its a too early version.

I don't have any plans on upgrading the CPU. I am certain I can push mine beyond 100% as it does 82% (485) at within spec voltage , as everything else :) .
Besides , CPU performance is more than enough for today games , which are the most demanding stuff I do. and windows experience at 5.7 is good enough I guess.
Not until applications will be able to actually USE 4 cores will there be a real need.
12-13-2007, 07:12 AM
HeadShotWI

PLEASE HELP!

I upgraded to 1226 bios with asus update and i am having problems mainly that my 9650se 3ware raid controller isn't working right. I want to flash back to a more stable bios but cannot figure out how. Can someone please link me to a utility that WILL work or explain how the heck to go backwards on a bios? Also what is the best more stable bios for Q6600?
12-13-2007, 09:15 AM
Ancient1

Quote:

Originally Posted by HeadShotWI

PLEASE HELP!

I upgraded to 1226 bios with asus update and i am having problems mainly that my 9650se 3ware raid controller isn't working right. I want to flash back to a more stable bios but cannot figure out how. Can someone please link me to a utility that WILL work or explain how the heck to go backwards on a bios? Also what is the best more stable bios for Q6600?

I'm kinda amazed at this kind of problem , I always use the Bios builtin Flash utility. very easy. just extract the bios to any availabe storage and point the flash utility to it
12-13-2007, 09:40 AM
HeadShotWI

Quote:

Originally Posted by Ancient1

I'm kinda amazed at this kind of problem , I always use the Bios builtin Flash utility. very easy. just extract the bios to any availabe storage and point the flash utility to it

Yes but it won't let you go BACKWARDS.
12-13-2007, 02:34 PM
DOM.

Well I have a Problem with my mobo Asus P5B Deluxe Rev. 1.03G I started a thread dont know if I put it in the right place but hope you guys can help me out here, Why is my Chipset Showing Intel B/W and Motherboard Unknown ?
12-13-2007, 02:39 PM
Ancient1

Quote:

Originally Posted by HeadShotWI

Yes but it won't let you go BACKWARDS.

I amazed that you think I'm THAT dumb :yepp:

I forgot the exact ver , but I think it was when I reverted from >1k to <1k bios ( for a while ).
I think its understood I didn't try 1226 to <1226
12-13-2007, 02:54 PM
pasatoiutd

Quote:

Originally Posted by Tom|Nbk

Enable support for N/2 Ratio option

Does it work for older CPUs ? I have a E6300 at this moment.
12-13-2007, 03:24 PM
chuckbam

Quote:

Originally Posted by HeadShotWI

Yes but it won't let you go BACKWARDS.

A member of ABXZone gave me this link. It is an older AFUDOS. I was able to flash from #1233 to #1219. All bios problems have been fixed w/ #1219 . Use at you own risk.

ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/AFUDOS207.zip

http://www.abxzone.com/forums/f41/p5...ml#post1395065
12-14-2007, 03:57 PM
phogger

Quote:

Originally Posted by HeadShotWI

Yes but it won't let you go BACKWARDS.

Use ASUS Update and select "Options" on the "Select the Update Method".

You should see an option for "BIOS Downgrade" which worked for me.

Denny
12-14-2007, 06:12 PM
DOM.

this is the way I flashed mine back I even did it with a CD used AFUDOS 2.07 http://support.asus.com/technicaldoc...Language=en-us
12-14-2007, 08:34 PM
ScottFern

I just flashed to bios #1226 have you guys heard anything about this version?

P5B-ASUS-Deluxe-1226.ROM
12-15-2007, 03:43 AM
graysky

@scottfern - I wouldn't flash to a beta BIOS unless I needed to do so... they can be buggy.
12-15-2007, 07:09 AM
Blackoberst

Quote:

Originally Posted by pasatoiutd

Does it work for older CPUs ? I have a E6300 at this moment.

It doesn't, I flashed with 1226 and there was no change for multi options in bios.
12-15-2007, 01:18 PM
chuckbam

Quote:

Originally Posted by Blackoberst

It doesn't, I flashed with 1226 and there was no change for multi options in bios.

I think that will only work for a future CPU that supports it.
12-16-2007, 01:24 PM
Olivier

Happily running

Just to say hi and that the system is happily running along, OC's are ok-not amazing- next stop x38 board and a quad; the p5b will be on water then....;) probably running much faster!!!!

PS: solved a x1 pcie pb by dropping to 100 and am running 1004 bios:); never misses a reboot since.................
12-16-2007, 07:39 PM
wanky

the n/2 option is for the new CPU like wolfdale which run with .5 multipliers

Show 100 post(s) from this thread on one page