I forget if they call it LOD or level of detail in nvinspect, but its in the advanced settings yes where dx9 compatibility bits shizz is.Quote:
Originally Posted by l0ud_sil3nc3
Printable View
I forget if they call it LOD or level of detail in nvinspect, but its in the advanced settings yes where dx9 compatibility bits shizz is.Quote:
Originally Posted by l0ud_sil3nc3
As for 03, maybe unstable cpu/gpu at those clocks?Quote:
Originally Posted by Don_Dan
gpu was +150mV memory was +100mV, going to have to try the less is more approach on that one, because that score is :banana::banana::banana::banana:.
So that's where I set the limit for each test in between runs correct? 5 & 15 for the rest huh:)Quote:
Originally Posted by Splave
Also best run order for me was N then everything else default, though Vivi's was close.
here is a dl link for a modded NV Inspector with extended LOD values
http://www.mediafire.com/?iai5vvdzsca21j0
v 1.9.4.x
yep same hereQuote:
Originally Posted by l0ud_sil3nc3
Yeah, since all the subtests are slow this is very likely.Quote:
Originally Posted by l0ud_sil3nc3
You didn't rerun CL?Quote:
Originally Posted by l0ud_sil3nc3
Nope I will tonight I just filled back up.Quote:
Originally Posted by Don_Dan
Hope things are going well for everyone, I have taken a step back for a bit due to health, time and money concerns...
Hope to be back soon, dewar is all sad and empty.
Still have LS's CPUs here too, ready to ship but currently too broke to ship stuff. Was wanting to try out cores on the 8150 on LN2 before sending it back.
Dead MIVE/2600K still here too...set up RMA with ASUS and can't pay for USPS Priority Mail, lol...
almost there:)
http://i.imgur.com/ls4nE.png
one more push and i think you got it :up:
I'm fine, but still busy with one last exam. :shrug:Quote:
Originally Posted by BeepBeep2
Not bad! ;)Quote:
Originally Posted by l0ud_sil3nc3
George, we need to get together for a bench session. we could do some real 01 damage between the 580's we have + chips + board selection + ram. I think we might be good to go for a top 20 spot.
Dude yes come up this weekend, you know I am stuck here until:)Quote:
Originally Posted by ZenEffect
^^If I'm local cali, I'll definitely join in:D
Too bad my local bench buddies not actively benching nowadays:(
Im sure if you hit up TA he would be down to bench.Quote:
Originally Posted by Dumo
Hey if you ever make it to the North part of the state hit me up:yepp:Quote:
Originally Posted by Dumo
Massive bench session to ensue:up:
@Zen...Just have to syncronize time off work with TA, Msimax and Chew seem to be inactive.
@L0ud... Will do:)
Bway, doing some 5Ghz 3D'01 runs. Sub-tests could be better
Lets do a thread here @ 3D section. Its fun:D
http://imageshack.us/a/img213/6934/01ai.png
loving the 01 benching men :) back to basics
NoiceQuote:
Originally Posted by Dumo
had a pretty good session with a bad mount
http://i.imgur.com/u90Zj.png
http://i.imgur.com/CfA7C.jpg
#2 not so bad I guess, however I am wondering how to change LOD between subtests on ATI? I used ati tray tools to change it but it freezes and a reboot is needed and then the LOD value you entered is set, which in the above case was 5 for all sub tests.
Exactly. The problem with Dumo is he manages a restaurant so he is working during the weekends and I work 9-5 mon-Fri. Benching is the easy part. Getting the same days off so we can bench is the hardest part.Quote:
Originally Posted by ZenEffect
Btw, nice 3d mark runs guys! I always wanted to learn how to do that one properly.
:clap:
I will debug the LOD issue tonight with a 7970 and let you know whats what but i remember using atitool to change lod values (not ati tray tools.)
I am going to test SetLOD as that's what was recommended, I found a copy from elmor to use, let me know if that is the best option.Quote:
Originally Posted by ZenEffect
I never got it to work tbh.
setlod or ati tray tools?Quote:
Originally Posted by ZenEffect