Printable View
can you post your ram settings? I have a a 165 0617 that does 2906mhz @ 1.4vcore on my DFI expert. I tested it up top 2970mhz 1.47vcore prime stable, using bh-5 & TCCD's. I got some HZ's yesterday they run 280-285 @ 8-4-4-3 1T but when using stock multiplier but once I try to use a divider and run anything over 290HT system won't boot. It got so bad it corrupted the windows/system32/ config file & I had to reinstall windows.:mad:
Here you go. I am gonna keep tweaking it in the hope I can touch 300.
Your success will = me having better luck I hope. I'd like to see what happens when you go over 300HTT. Something like 312-315HTT. My CCBBE0617 will run 315HTT (2835mhz) at default volts but I can't get the g skill to boot at Hight HTT with anny divider. What bios are you using, & where do you have you drive strength & data strength set to in the bios. Actually, I guess I need your overall bios settings because I can't get into windows to use A64 tweaker. Thanks so mucj, been up all night.
I am using the 0406 OCZ Tony Bios.
Here are my BIOS settings:
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable
Cas: 3
Trcd: 4
Tras: 8
Trp: 3
Trc: 7
Trfc: 16
Trrd: 2
Ter: 2
Twtr: 2
Trwt: 3
Tref: Auto
Odd Divisor Correct: Enable
Dram Bank Interleave: Enable
Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7
Dram Date Drive Strength: Auto
Max Async Latency: 8ns
Dram Response: Normal
Read Preamble Time: 5ns
Idlecycle Limit: 16 cycles
Dynamic Counter: Disable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable
Just got home from work, set all my settings like yours except tref =3684 Freq =166 5/6 & it booted right up:toast: Currently @ my cpu's sweet spot 2906 mhz 1.4vcore. Memory is only @ 242mhz but the system won't boot when I up the divider for 264mhz. Either way I'm happy thanks!!
Thats because of your TREF settings. Set the TREF on auto and I am pretty sure your system will boot up even @ 264. The TREF is very sensitive to dividers.
Can i know the first four digit of your Ram S/N number? looks like 06xx or 05xxQuote:
Originally Posted by big poppa pump
Thanks, I originally had tref set to auto & it wouldn't boot with 9/10 I then played with different tref settings & still no go. Eventually I dropped to the 5/6 divider and it booted fine. I was on 3684 @ that time so I left it there. I've since then went back and tried every tref setting availabe and the system still will not boot using 9/10. It got into windows & crashed using one once, but never got into windows on all the others. I'm back on the 5/6 divdier and am still very happy & thanks for you help. I'll probably just swap my 170 over since no divider will be necessary to run 2.8ghz. These stick ran up to 285mhz 1:1.Quote:
Originally Posted by big poppa pump
Nice post i shall be looking at this thread to help me out wit my G skills 2gb kit as soon as i get my new cpu :)
I had broke 0605, gettin a tested set from g skill here in germany
Can i ask for your A64 tweaker setting at 270/285?...pretty pleaseQuote:
Originally Posted by The Nemesis
BTW and what is ram first 4 S/N?
0603 are the first four serial numbersQuote:
Originally Posted by zentrad
@ nemesis, anothers question, waht drive strength/dram lvl? (the weka ones) and bios version?
AFAI can get capped at 260 3-5-4-3
Dram Drive Strength =7Quote:
Originally Posted by zentrad
Dram Data Drive Strength = Auto
By the way I'm using the DFI Expert which is alot different than the ultra. 4/06 bios.
Nemesis.. Are these Settings DualPrime Stable? Do u have a Screen of 2 or more hours of Dual Prime, with these settings? :D
Thx!
err sry when i see your sig ithink we use the same motherboards:p:Quote:
Originally Posted by The Nemesis
my setting:260 3-5-4-3
http://img78.imageshack.us/img78/2863/260543pi6.th.jpg
No not @ 3 ghz. I've not gotten over 2970mhz prime 12+hours dual prime stable with this chip yet. I wasn't using the g. skills then either. I'll post a screen shot using the hz's for you late tonight. Anything in particular you want to see. 2970mhz will have the memory @270 mhz I think.Quote:
Originally Posted by WulleWuu
Hello
I just got some HZ from Newegg (when price was down :D). Overall I'm not so happy with this memory.
It seems I maxed out around 265MHz when I was expecting more than 270MHz as reported from the begining of this thread.
Believe me GS.Tech... I will never trust on you again!!!
From my old sets (UTT+BH6) I could use both 183 and 166 dividers which I can't with this memory.
As by now I'm stable at 11x265 1:1 3-4-4-8 1T 2.55v :mad:
Guys I need some for a new conroe system and a P965 MB.
will this memory still do 380-390 or if you order now and get the new
stuff...dud ?
I dont know much about memory but people were saying over 400
if the setup is correct but now that they have changed the chips
what can it do ?
thanks for help I need to get something with good timings that will run
380-390
sparks
I think conroe is DDR2, this stuff is DDR.:stick:Quote:
Originally Posted by sparks
Thanks Nemesis, I have 2 college degrees and neither one is in reading
Where is the post with pictures :)
I was looking for a post on F2-6400PHU2-2GBHZ and saw the 2GBHZ and missed the rest.
thanks for the info
sparks
atleast your first sticks werent broke like mine which i bet you wish they were now only getting 266, so many people are having probs with this stuff not being able to clock it like was shown, i shoulda got Corsair 4400pros or some mushkin redline!!Quote:
Originally Posted by RafaDel
They call this stuff matched dual channel kits and if you test each stick they will all clock different, 1 of mine did 280 and the other couldnt even get 250!!!
So dissapointed with this stuff, i even told g skill that!!! The only reason why the G Skill tech is getting such high numbers out of his is because he tested sticks and got the ones that clock the highest together and then gave us all those Screenies, but all i got to say is:
FALSE ADVERTISEMENT
tonight I just tested my F1-4000USU2-2GBHZ rev 0605 with my opteron 165 which could oc to 280 at 1T, nice ram. ordered from overclocker.uk
Wow you got a nice set i hope my new set does the sameQuote:
Originally Posted by denden
I think you could refer the following DRAM setting for your reference:Quote:
Originally Posted by e30Birdy
DRAM Frequency Set - 200=RAM/FSB:01/01
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 03 Bus Clocks
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 or 06 Bus Clocks
Row precharge time (Trp) - 04 or 03 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 13 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3684 Cycles
Write CAS Latency (Twcl) - 1
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 3
DRAM Data Drive Strength - Auto (Reports Level 1-Reduce 50% in Everest)
Max Async Latency - 8.0 Nano Seconds
DRAM Response Time - Fastest
Read Preamble Time - 5.0 Nano Seconds
IdleCycle Limit - 16 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 8 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)
I just try to hit 285 it passed all the memtest but #8 it gots several errors, guess this is affected by the opteron which the max speed is 283 at stock voltage?