Water Cooled Case Gallery

Printable View

Show 100 post(s) from this thread on one page

07-25-2007, 08:51 PM
Waterlogged

Quote:

Originally Posted by YugenM

AquaComputer AquaStream, a variant of the 1046.

I wonder whats the manufacturer/model name of the CPU blocks he's using...

They look an awful lot like the older XSPC CPU blocks with the newer mounting brackets.
07-26-2007, 12:22 AM
TRG

Those damned Lian-Li cases :( They make my P180 look cheap ;)

I've done a little upgrade myself, silence was my main target, and I can assure you that you won't hear anything than harddisks when I give 7 volt to my 18dB papst fans :)

http://www.nietbelangrijk.nl/download.php?id=2373

http://www.nietbelangrijk.nl/download.php?id=2375
07-26-2007, 04:26 AM
Yozzman

Quote:

Originally Posted by TRG

Those damned Lian-Li cases :( They make my P180 look cheap ;)

I've done a little upgrade myself, silence was my main target, and I can assure you that you won't hear anything than harddisks when I give 7 volt to my 18dB papst fans :)

http://www.nietbelangrijk.nl/download.php?id=2373

Look at your graphic card's PCB!!!
The waterblock is bending the PCB :(
Loosen the bolts a bit and than it will be just fine.

(i got the same when i was installing mine...)
07-26-2007, 05:04 AM
TRG

Yeah, I know :mad:

The stupid EK waterblock did not fitted perfectly on my x1950xtx. The screws were too short, so I had to use/make some custom screws. When I noticed the bended PCB I was prepared for the worst, but hey, it's still working. But maybe I will try loosen it up (if the screw is not too short).

Somehow my videocards always bend after adding custom cooling (you should had seen my 9800pro with zalman heatsink + fan).

PCB are quite strong, so I'm not afraid, and even if it fails, it's only a good excuse to buy a 2900xt :)
07-26-2007, 10:16 AM
Dark Prodigy

Quote:

Originally Posted by V I P E R

Can you give us the specs of the system. It is a very nice build, congrats man.

Thanks =) Opteron 290's, 4Gb RAM, XFX 7950GT Extreme SLi, X-Fi Platinum, 2x74Gb Raptors RAID 0, 1 TB storage, PVR 500 & other stuff

Quote:

Originally Posted by neoman

Dark Prodigy one of the best setups i have ever seen. How much did your wc components + case cost to you ?

Thanks for the great compliment =) Cost? I wasn't keeping track.. *cough*

Quote:

Originally Posted by Grinch

Dark Prodigy...great looking job!

Thanks =)

Quote:

Originally Posted by v0dka

Dark Prodigy what pump is that, an Eheim?

Nice rig you got, I think it may do very good in distriuted computing. :)

Click the link in my sig. :D

Thanks and of course I Fold =). See Below.

Quote:

Originally Posted by YugenM

AquaComputer AquaStream, a variant of the 1046.

I wonder whats the manufacturer/model name of the CPU blocks he's using...

That is correct. See below.

Quote:

Originally Posted by Waterlogged

They look an awful lot like the older XSPC CPU blocks with the newer mounting brackets.

Hm.. close but not quite. Here they are..

http://i47.photobucket.com/albums/f1...09_4resize.jpg

http://i47.photobucket.com/albums/f1...21_3resize.jpg

http://i47.photobucket.com/albums/f1...20_3resize.jpg
07-26-2007, 12:31 PM
deepsilver

nice cooler's. :up:
07-26-2007, 03:04 PM
BeeN

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg
07-26-2007, 04:08 PM
rdmty

Quote:

Originally Posted by BeeN

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg

that's a pretty cool effect where the orange and white meet :D
07-26-2007, 05:25 PM
Grinch

Quote:

Originally Posted by BeeN

These Flowblocks looks very cute :)

http://www.imagebanana.com/img/g13oyhd9/IMAG0002.jpg

worthy of a beer:

http://s2.supload.com/thumbs/default/_MG_2158.jpg
:up:
07-26-2007, 11:19 PM
msgclb

http://img529.imageshack.us/img529/1...1280ef6.th.jpg
07-27-2007, 02:05 AM
BeeN

Har Har i like it too :) But now i managet those cables for a better look. And grinch thanks for your ice cold beer i really enjoyed it :D My case getting dirty but i installed some Dust Guards in the bottom, maybe this should help.

http://benstyle.de/projekt/case1.JPG
http://benstyle.de/projekt/case2.JPG
07-27-2007, 02:50 AM
hecktic

Quote:

Originally Posted by Grinch

worthy of a beer:

http://s2.supload.com/thumbs/default/_MG_2158.jpg
:up:

:rofl: :ROTF: ... there you go again with the beer ...

Quote:

Originally Posted by Dark Prodigy

That is correct. See below.

Hm.. close but not quite. Here they are..

http://i47.photobucket.com/albums/f1...09_4resize.jpg

http://i47.photobucket.com/albums/f1...21_3resize.jpg

http://i47.photobucket.com/albums/f1...20_3resize.jpg

Nice block, have you tried the chipset blocks XSPC makes?
07-27-2007, 02:56 AM
Solarfall

wow BeeN thats some awesome wire management.. :up:
07-27-2007, 04:03 AM
ANP !!!

Quote:

Originally Posted by Patriote

Some pics of my final build :)

Loop order : EK Res 150 - MCP355 with Petra's top - EK-FC8800GTX - Thermochill PA120.3 - FuZion - MCW30 - Back to EK Res 150.

Looks great ? :)

Good work like always man :). Keep it coming :yepp:
07-27-2007, 09:20 AM
Patriote

Quote:

Originally Posted by ANP !!!

Good work like always man :). Keep it coming :yepp:

Heh i knew you couldn't miss it :) Thanks a lot my friend!
07-27-2007, 11:41 AM
ANP !!!

Quote:

Originally Posted by Patriote

Heh i knew you couldn't miss it :) Thanks a lot my friend!

Always there to adore ur work :yepp:

wish i can get my hands on a MM :rolleyes:
07-27-2007, 08:57 PM
customss

3 Attachment(s)

Another Cooler by CustomSS Solutions

we just finished this one, QuietOnes 3000, 780 Gph, to see more pictures http://www.customsssolutions.com
07-27-2007, 09:15 PM
Sparky

I like the green.

What pump and rad is in there?
07-27-2007, 09:22 PM
customss

Its a QuietOnes 3000, 1"NPT fittings 780gph 10.5 ft head, radiator has dual 120mm Coolermaster fans in custom stainless body http://www.customsssolutions.com to some better pictures of it
07-28-2007, 01:58 PM
Prodigys

Quote:

Originally Posted by Steffen

Finally I´m done :D

http://www.abload.de/img/wak226f0z.jpg

OMG!

That's a very nice case ! Wich one is that ? I can nothing find off it... :shrug:

If you have a link to the manufacterer or something ?

Thnx !
07-28-2007, 02:02 PM
marauder16

Quote:

Originally Posted by Prodigys

OMG!

That's a very nice case ! Wich one is that ? I can nothing find off it... :shrug:

If you have a link to the manufacterer or something ?

Thnx !

lol, you must be the only person here that doesn't know this is a 'Silverstone TJ-07' ;)
07-28-2007, 02:05 PM
Prodigys

Quote:

Originally Posted by marauder16

lol, you must be the only person here that doesn't know this is a 'Silverstone TJ-07' ;)

Sorry, just new @ XS, and you all got those nice big cases.
So I thought, just ask he ;) .
07-28-2007, 02:39 PM
marauder16

Quote:

Originally Posted by Prodigys

Sorry, just new @ XS, and you all got those nice big cases.
So I thought, just ask he ;) .

no need to say sorry dude, we were all new here once :)
07-28-2007, 03:13 PM
justin_c

steffan...OMG :p: the german rigs at effizienzgurus.de watercoolign section are just amazing; yours and xbox's.
07-29-2007, 11:45 AM
killert

1 Attachment(s)

http://www.xtremesystems.org/forums/...1&d=1185738273

Show 100 post(s) from this thread on one page