2900 Pro Owners Thread

Printable View

Show 100 post(s) from this thread on one page

10-16-2007, 04:46 PM
NickS

No, the file name you type is ATI290~1.BIN
10-16-2007, 04:48 PM
merlot_14

OK, I'll report back in a few.
10-16-2007, 05:11 PM
merlot_14

WOOT!!!
I've done it! Thanks NickS!!!

Pic: http://i117.photobucket.com/albums/o...hwhey_14/2.jpg

:cool:

Here's a pic of my card with 2900PRO BIOS:
http://i117.photobucket.com/albums/o...ey_14/GPUZ.jpg
10-16-2007, 05:45 PM
situman

Quote:

Originally Posted by Chri$ch

Try this Bios -> Download

This is from my Sapphire HD2900Pro 512MB, def.Voltage is 1.20v

My Card work with 0.9v @ 300Mhz (2D profile with ATITool)

anyone tried this bios and confirmed voltage increased? Thanks.
10-16-2007, 10:07 PM
WrigleyVillain

Quote:

Originally Posted by merlot_14

I've done it! Thanks NickS!!!

Oh sweet gj and congrats! The first 1GB flashed :clap:

Psyched not only for that but cuz you hadn't reported back in a couple days and I hoped u hadn't fuxord ur card or something :p:

Plz tweak test and report further... still 1.15v?
10-16-2007, 10:39 PM
nickless

Hi everyone, last night I've flashed my Pro 1GB with XT bios, but result wasn,t better then before. The OC is the same 911 / 2466, but 3D Mark06 score was 90 3D Marks less with the same settings. I,ve tryed the next step 928 of GPU with 1.288v but it crashed.
Now I,m with old good Pro bios again:)
10-16-2007, 11:11 PM
merlot_14

Quote:

Originally Posted by WrigleyVillain

Oh sweet gj and congrats! The first 1GB flashed :clap:

Psyched not only for that but cuz you hadn't reported back in a couple days and I hoped u hadn't fuxord ur card or something :p:

Plz tweak test and report further... still 1.15v?

lol, Windows went corrupt on me and my Internet started acting up. I'll oc tommorow. Thx!
10-16-2007, 11:35 PM
Mad_Man

Quote:

Originally Posted by roger_h99.nor

Measurement inside of the shim is approx 32 by 32 mm. You need to find a block with contact area thats no wider than that. No knowledge on the the 8800 blocks, so I don't know.

On a side note: How does Chri$ch get his vddc to stick? Hardmod?

regards
r.-

thanx for the info, very usefull. :)

my last question,
how much Wats does this card use in desktop?
10-17-2007, 02:49 AM
NickS

Quote:

Originally Posted by Mad_Man

thanx for the info, very usefull. :)

my last question,
how much Wats does this card use in desktop?

Less than a 8800GTS 640 if that means anything, lol.
10-17-2007, 02:56 AM
Athens[2004]

Hey Guys , does the atitool 0.27 allows to fully controll the voltages via software? [vcore , vram etc.] on win-xp ?

At vista didnt work , and im thinking to rolling back to xp's .
10-17-2007, 03:41 AM
Crankybugga

Quote:

Originally Posted by merlot_14

WOOT!!!
I've done it! Thanks NickS!!!

:cool:

Here's a pic of my card with 2900PRO BIOS:

Did you notice the reported bandwidth displayed by gpuz has suffered huge impact, as well as texture and pixel fillrates?
10-17-2007, 04:16 AM
roger_h99.nor

Quote:

Originally Posted by Athens[2004]

Hey Guys , does the atitool 0.27 allows to fully controll the voltages via software? [vcore , vram etc.] on win-xp ?

At vista didnt work , and im thinking to rolling back to xp's .

Ther's a issue regarding this card and 0.27 - you can alter vddc (vcore), but it will not stick. Once you hit 'set clock' or launch a 3D app its back to 1.20V or whatever it is as default. Vram sticks (mvddc). I think this issue is mentioned earlier in this thread.
10-17-2007, 05:25 AM
Trike

can anybody with a crossfire setup verify that the cards indeed switch to 3d clocks? I put my second card in and i think my drivers are screwing with me again. i have the rivatuner hardware monitor up and once I launch a 3d app (3dmark06) it doesnt switch to 3dclocks. I'm only getting 13k right now, which is pretty dissapointing. But i'm sure it's because the cards aren't being switched to 3d clocks. I just wanted to confirm that the cards do switch to 3d clocks in crossfire mode.

in rivatuner it just shows 500/500 and never changes.
10-17-2007, 05:33 AM
Jinxy

I run in crossfire and get

14,300 with the cards @ Pro and Q6600 @ 3.0 on a X38. You aren't using Rivatuner to adjust the clock speeds still are you as only one card overclocks.

With them both @ XT bios and Q6600 @ 3.5 I 17,500.

BTW the x16 x4 ports are meant to give it a 10% hit
10-17-2007, 06:05 AM
merlot_14

Quote:

Originally Posted by Crankybugga

Did you notice the reported bandwidth displayed by gpuz has suffered huge impact, as well as texture and pixel fillrates?

Well I took the screenshot with different versions, not sure if the first one was accurate.
10-17-2007, 07:00 AM
Martin.v.r

1 Attachment(s)

ATItoll an single card 2900PRO bios 512MB , can't remember after reboot:mad:

i got to this result here 1,20V to GPU = 857 MHz / 958 MHz on air

Q6600 G0 @ 3.9GHZ
10-17-2007, 07:12 AM
Trike

Quote:

Originally Posted by Jinxy

I run in crossfire and get

14,300 with the cards @ Pro and Q6600 @ 3.0 on a X38. You aren't using Rivatuner to adjust the clock speeds still are you as only one card overclocks.

With them both @ XT bios and Q6600 @ 3.5 I 17,500.

BTW the x16 x4 ports are meant to give it a 10% hit

Thats interesting.. so you think my scores are about normal then for my specs? The 13k score I got is with the XT bios.

I was only using rivatuner for the hardware monitoring, to check to see if it was switching out of 2d clocks to 3d clocks.

I'm not going to try overclocking till i know my machine is working correctly. I think it might be a good time to reformat, and put a clean OS on it.
10-17-2007, 07:26 AM
WrigleyVillain

Curious if anyone with the 8-pin chooses to use Overdrive for oc instead of other utils?
10-17-2007, 07:38 AM
Jinxy

Just finished a re-install and now get 18,205. Thats on Vista x64

http://service.futuremark.com/compare?3dm06=3418483
10-17-2007, 08:29 AM
SteveLord

My card from eWiz should be coming in this week hopefully. Cant wait to try this!
10-17-2007, 09:11 AM
merlot_14

They're out of stock at newegg, again. Ewiz doesn't have any 2900PRO, nor does any other e-tailer with the exception of NCIX. Although they have the 512 for like 290$+
10-17-2007, 09:17 AM
Trike

the sapphire card i got from new egg yesterday was flashed with a pro bios. I flashed it to the XT. both cards are able to run in crossfire now. I just need to resolve my driver issues. At least i hope thats the problem.
10-17-2007, 09:27 AM
WrigleyVillain

Quote:

Originally Posted by merlot_14

They're out of stock at newegg, again. Ewiz doesn't have any 2900PRO, nor does any other e-tailer with the exception of NCIX. Although they have the 512 for like 290$+

Sweet. This is another reason why I bought early. Newegg had 1GBs yesterday.
They havent removed the listings but I wouldnt be surprised if no more show up there.
10-17-2007, 09:34 AM
Ati007

Quote:

Originally Posted by WrigleyVillain

Curious if anyone with the 8-pin chooses to use Overdrive for oc instead of other utils?

Yes I do but the max what can I set is only 858Mhz for gpu and 1153Mhz for memo.
10-17-2007, 09:44 AM
MadDias

my hd2900pro´s arrived today!

first run of 3dmark06 on a fresh and clean winxp install with cat7.10 and stock card clocks:
single card 8860
crossfire 11691
not that bad for an amd-only rig ;)
now i´m waiting to buy some waterblocks next month and oc those babies.

Show 100 post(s) from this thread on one page